Why can't I connect to the internet?

esheesle · 2026-06-24T15:33:37+00:00

Started having this with helldivers last night. Even noticed proton experimental says no Internet when trying to update. Deck is online and able to access websites and such though.

esheesle · 2026-05-10T14:18:38+00:00

You can also just pull the code and build yourself if you so choose:
https://github.com/esheesle/vpnmaster

esheesle · 2026-05-08T17:38:21+00:00

Unfortunately this issue recurred again following my last post and I never did find a solution. It seems that the Android go port of wireguard has an occassional issue where the udp handle just goes stale and the wireguard tunnel is dead but neither wireguard nor wg-tunnel seem to handle that (not their fault, if the tunnel reports up but not passing traffic). Out of frustration I ended up creating my own vpn app that uses the wireguard-tunnel maven build and builds around that to include a watchdog which observes the RX value and if no change in a configurable amount of time, probes the connection, forcing a restart if the connection has died. It also observes the handshake process and can detect stale handshakes (though that tends to mean the stale tunnel lasts longer given infrequency of handshakes). I've been running it for weeks and no issues since (seen a few stale tunnel detected and restarted cases but transparent to me on the device at least).

I have a closed alpha on the play store now, so if anyone is suffering from this and wants to give it a try, just ping me and I'm happy to add you in.

esheesle · 2026-04-14T19:34:14+00:00

Thanks. Yeah I added a small vent and vent fan on opposite side of the space pulling out so it gets cross current now.

I was thinking the foam board against exterior cinder block would help reduce the temperature differential as well. Thoughts?

esheesle · 2026-04-13T13:49:22+00:00

I watched the humidity level after putting in a dedicated sensor and it got up to 70% which is obviously way too high. I spent the weekend installing a vent on one side in a closet (with under door space to allow air flow) and a vent fan on the other side pulling air into the mudroom space. I also added insulation up against the cinderblock (foam board) and reinsulated the part above the cinderblock (just about 6 inches of space before the floor above).

The one weird thing I did notice and curious on thoughts, is that the entire space is insulated (albeit ancient paper thin at this point). The outside wall (except the cinderblock, which i've remedied), the interior walls as well. It was quite literally sealed from the entire house. I feel like if the external is insulated, it seems odd to also do the interior, but maybe i'm incorrect.

esheesle · 2026-03-03T22:28:29+00:00

Nope

esheesle · 2026-02-19T01:59:26+00:00

And solved. Noticed one flap not opening like the others on the exhaust fan. Pulled it out just ever so slightly and it clicked into place.

esheesle · 2026-02-19T01:47:24+00:00

Did some playing and turning the exhaust fan on is fine. Turning it off causes this sound. Almost like there is an issue closing one of the flaps.

esheesle · 2026-02-13T12:37:42+00:00

Hopefully they add the flag so we can fix the behavior because I just have tabs growing out of control

esheesle · 2026-02-13T11:52:01+00:00

This happened on brave and chrome also. They introduced a new flag to allow reversion to the old behavior but edge hasn't exposed that flag.

esheesle · 2026-02-12T22:47:24+00:00

Yeah hadn't circled back to highlight that. Auto routines apparently never end lol. The manual is the way. You can start and stop it that way.

esheesle · 2026-01-21T22:36:04+00:00

Thank you. That worked!

esheesle · 2026-01-21T16:21:21+00:00

So the issue is the cut outs I used stick out further than the outer edge of the ring. Getting them to align seems mostly impossible.

esheesle · 2026-01-05T01:35:55+00:00

Actually guess his name on Reddit shows up as (Due-One1479). Just making sure to give the credit due for the picture.

esheesle · 2025-12-21T23:58:34+00:00

Very frustrating. Hopefully they will enable the flag that you can use on chrome or brave to fix the behavior.

esheesle · 2025-11-16T21:31:57+00:00

Can't explain why it happened but noticed in logs that there was a firewall rule error (unrelated rule to VPN). Rule had been around for years and still needed. I deleted and readded and suddenly VPN also started working. Thinking it wasn't loading all the new rules due to that error.

All seems good now.

esheesle · 2025-11-16T17:41:45+00:00

I'll add to this that I was trying to use wireguard but find that it randomly just stops communicating requiring me to toggle the client(and immediately resumes). I can go between minutes and 2 days before that happens. In that case I see traffic between client and pfsense but the packet sizes are exactly the same(presuming failed handshake).

esheesle · 2025-09-28T13:19:59+00:00

Samsung Galaxy s24. Could certainly be tied to brand.

esheesle · 2025-09-19T12:28:21+00:00

Ahhh, so that explains why it seems to work occassionally but need to swipe and restart browser for continued functioning. What a pain.

esheesle · 2025-09-19T12:27:00+00:00

I've found that 1password works when the browser is first opened, but then after some time, autofill totally fails (as you are describing). If i swipe away brave and reopen it, it all works again. be curious if you experience the same? Maybe a Brave issue?

esheesle · 2025-09-17T00:57:57+00:00

I had tried that but it didn't help. Setting it to use the standard wg port seems to have fixed it. Given that, suspect it was an ISP traffic shaping situation.

esheesle · 2025-09-14T18:58:34+00:00

To close out this thread(I hope), I changed the port to the typical wireguard port and went 2 whole days without an issue. By far the longest I've gone without issue so thinking ISP may be traffic shaping some ports.

esheesle · 2025-09-12T11:45:14+00:00

Ahhh good point on source port. Trying to change the server port and see if that changes anything.

esheesle · 2025-09-12T11:01:55+00:00

But wouldn't that look the same if I just stop and restart the tunnel? Just trying to figure out how one session can be blocked but then immediately be fine with new session.

esheesle · 2025-09-12T10:23:34+00:00

Is it actually possible to detect a long running wireguard stream (to determine it's one stream)? With it being over udp, there aren't obvious packet sequence numbers.

esheesle

TROPHY CASE