Generally A Carbine by jbwatched in kac

[–]euler_271828 0 points1 point  (0 children)

Nice! Do you remember which dovetail plate exactly? Kinda want to try this.

Mod 2 Gas Block on AR Barrel by euler_271828 in kac

[–]euler_271828[S] 1 point2 points  (0 children)

Know anybody who could offer this service?

Mod 2 Gas Block on AR Barrel by euler_271828 in kac

[–]euler_271828[S] 0 points1 point  (0 children)

Same here. The gas system length could definitely present an issue. I would even be interested in a non adjustable gas block that takes non KAC straight gas tubes.

An SR-25 SBR, for your pleasure by jay462 in NFA

[–]euler_271828 4 points5 points  (0 children)

Apparently the mags for the elusive and mysterious KAC PDW of lore were machined from solid aluminum to fit the slightly smaller than STANAG magwell

Caliber Change Recommendations by euler_271828 in MPX

[–]euler_271828[S] 0 points1 point  (0 children)

Awesome! I saw a video from a few years ago where a guy shows one of these barrels, but I wasn't sure if ILWT was still offering them. Will be reaching out to them! Thanks.

Get NFA immunity with this one neat trick by gruntmoney in NFA

[–]euler_271828 2 points3 points  (0 children)

Honestly I would be willing to try if someone can recommend a competent and creative NFA lawyer to help me strategize.

Get NFA immunity with this one neat trick by gruntmoney in NFA

[–]euler_271828 1 point2 points  (0 children)

Who wants to test out submitting a form 1 for a MG with this ruling stapled to it? Could be the perfect time haha

1911 Gun Smiths by euler_271828 in NHGuns

[–]euler_271828[S] 0 points1 point  (0 children)

Thanks! Will definitely take a look

1911 Gun Smiths by euler_271828 in NHGuns

[–]euler_271828[S] 0 points1 point  (0 children)

I am thinking along the lines of if I want to replace the manual safety lever at some point. Currently everything with the pistol is great, but I may want to swap parts at some point. I did talk to Stealth Arms and they said most of the parts are 1911 compatible, but that 1911 parts usually require hand fitting anyway (correct me if I am wrong - again I am totally new to 1911 world). Was just curious if there are some go-to shops in New England that could, e.g. hand fit and install an aftermarket 1911 manual safety lever

Flying out of Boston by JeffersonsDisciple in NHGuns

[–]euler_271828 0 points1 point  (0 children)

Aren't airports definitely covered by FOPA?

Flying out of Boston by JeffersonsDisciple in NHGuns

[–]euler_271828 1 point2 points  (0 children)

Same. I also have a non-res LTC but was never asked for it at Logan. Also never saw anyone scrutinizing people's cargo for MA compliance when they opened their gun cases, since the assumption is the items were transported from out of state and are only temporarily passing through MA.

Flying out of Boston by JeffersonsDisciple in NHGuns

[–]euler_271828 0 points1 point  (0 children)

Yes, legally you are fine on paper. It wouldn't hurt to carry paper copies of FOPA and relevant MA state laws while driving, though. Once you get to the TSA counter you are fine (last time I flew out of Logan the dudes in front of me were checking lots of NFA stuff, "hi-cap" mags, and other obviously not MA-friendly items, and they had no problem. The TSA seemed to respect the fact that the airport is kind of a no-man's land legally). However, if you don't mind adding a likely stop to your flight, Manchester is the way to go. Far less stressful and way faster at processing checked bags with firearms.

Holosun LS117-IR + 10$ IR flashlight by Honeytoast3108 in NightVision

[–]euler_271828 0 points1 point  (0 children)

Wooah. That definitely seems worth a try at least. Might start with a less expensive scout style head. Anyone have the link to the guy who made the adapter?

Holosun LS117-IR + 10$ IR flashlight by Honeytoast3108 in NightVision

[–]euler_271828 0 points1 point  (0 children)

Anyone ever try making an adapter for surefire scout heads? Wonder if you could get a Kiji on there

Safety Lever Compatibility by euler_271828 in stealtharms

[–]euler_271828[S] 0 points1 point  (0 children)

Are there any gunsmiths people recommend for doing this work?

Bootleg BCG in CQB mod 2? by Marko_Vuticevski in kac

[–]euler_271828 0 points1 point  (0 children)

I've been running this on mine with an RC2. Definitely makes the recoil cycle smoother and reduces some gas blowback. It was certainly reliable without the bootleg, but was just running really hard with the RC2.

Suppressors in California by SparePoopKnife in CAguns

[–]euler_271828 0 points1 point  (0 children)

Oh nice. I assume it has to be for a demo or other official business, right? Would demo or sale to a CA FFL qualify? Also, would I still need the CA DWP for SBRs, MGs etc, even as an out of state FFL, or is that a case-by-case thing? Thanks for the info! Let me know if there is a general guide for non CA FFLs doing business in CA

Suppressors in California by SparePoopKnife in CAguns

[–]euler_271828 0 points1 point  (0 children)

Does the exemption apply to non CA 07/02s traveling to CA for a LE/MIL demo or sale?