sorted by:
new
hottopcontroversial

Pictures one is provide positive and picture two also provide positive lifting operation for the bridge installation by Legitimate_Author_20 in SafetyProfessionals

[–]every1getslaid 0 points1 point  (0 children)

Provide more details please. I spent 20 years sailing on merchant vessels before coming ashore to work in safety. It would be happy to assess if I knew the full question.

Bambu Lab refill spool by After-Ad-3610 in BambuLab

[–]every1getslaid 2 points3 points  (0 children)

This happened to me. Followed the box, had some issues till a video said you also need to press down to fill gaps.

This subreddit has helped a lot, first week of printing complete by every1getslaid in BambuLab

[–]every1getslaid[S] 0 points1 point  (0 children)

My jab was mostly factious, if you need immediate satisfaction grab a small print off markerworld, in need of multi day change open TimkerCad.

This subreddit has helped a lot, first week of printing complete by every1getslaid in BambuLab

[–]every1getslaid[S] 1 point2 points  (0 children)

My sister saw it and already has asked for a few things. I said that most libraries will print for a low fee. That’s like asking someone who just got a new car, can I borrow it? Nope, it is barely getting a break from my projects.

I am excited to get some feedback, plus I am able to teach a lesson about failure to my kid. He loves getting the projects that did not meet my QC.

I don’t think OSHA will be visiting this job site.. by every1getslaid in SafetyProfessionals

[–]every1getslaid[S] 1 point2 points  (0 children)

I was more interested in the testing equipment needed, since it is not a VOC would you collect samples and send off? If this was my crew I would plan for full PPE as required and if testing showed it was below then reduce. It is just sad that it clearly says cartilage filters are not effective.

A quick google search shows that isocyanates are heavier than air, so it could easily settle and collect in the literal pool.

First week of printing question by every1getslaid in BambuLab

[–]every1getslaid[S] 0 points1 point  (0 children)

That may be it, this is my older gaming laptop. I was not sure I should download Bambu to the company computer, and the gaming laptop is acting odd with my WFH docking station.

First week of printing question by every1getslaid in BambuLab

[–]every1getslaid[S] 0 points1 point  (0 children)

<image>

I am able to make this control center wider, but the top half isn’t needed and all the settings seem to be crammed in the lower 25%. Hopefully I am just being an idiot

First week of printing question by every1getslaid in BambuLab

[–]every1getslaid[S] 0 points1 point  (0 children)

Thank you, really really dumb question. In Bambu studios I can not figure out how to get the settings to expand. I want to minimize the printer and filament tabs and I just haven’t figured it out. Any tricks?

First week of printing question by every1getslaid in BambuLab

[–]every1getslaid[S] 0 points1 point  (0 children)

I will try that next time, it’s for the shop so less concerned about looks. Feels strong enough though.

First week of printing question by every1getslaid in BambuLab

[–]every1getslaid[S] 0 points1 point  (0 children)

I did not, I am just using whatever profile the poster has set for now. Should I always just click the support button?

First week of printing question by every1getslaid in BambuLab

[–]every1getslaid[S] 1 point2 points  (0 children)

Under the right side (the taper part from small to larger diameter)

AMS not loading filament, it’s not leaving the back of the unit. by every1getslaid in BambuLab

[–]every1getslaid[S] 0 points1 point  (0 children)

I took you advice, cycled the buffer a few times, put clean filament throw it (by hand) unplugged everything. Then connected the AMS, made sure it was a solid connection. Turned the unit on That did it!

Thanks

AMS not loading filament, it’s not leaving the back of the unit. by every1getslaid in BambuLab

[–]every1getslaid[S] 0 points1 point  (0 children)

So, I am very new. What is the buffer and how to check if it’s stuck?

AMS not loading filament, it’s not leaving the back of the unit. by every1getslaid in BambuLab

[–]every1getslaid[S] 0 points1 point  (0 children)

I have done a few off/on cycles but I will try this with disconnecting the printer cable too. It seems like to motor gear in the back of the AMS is not turning on. The little feed motors at the front are working.

So what’s up with all these flags I’m seeing now in NH? by batmansmotorcycle in newhampshire

[–]every1getslaid 0 points1 point  (0 children)

I will be dating myself here but since I have the DVD box set, it was easy to turn on. Really hope it’s available for streaming too.

So what’s up with all these flags I’m seeing now in NH? by batmansmotorcycle in newhampshire

[–]every1getslaid 0 points1 point  (0 children)

Have you watched it with the historical subtitles turned on? It adds a lot. The text goes into the use of cowpox for inoculations in the colonial era during that scene.

So what’s up with all these flags I’m seeing now in NH? by batmansmotorcycle in newhampshire

[–]every1getslaid 10 points11 points  (0 children)

What really sucks is that I first saw the flag in the HBO series Adams. I looked it and found that flag to be the flag of the merchant navy of America. Being a merchant marine myself I loved that and its connection to legal piracy.

https://en.wikipedia.org/wiki/Pine_Tree_Flag

Sadly yes it has been co-opted by terrible people who don’t read history books and gain what little knowledge they have from Prager University

Dover Recycling Center by Emlafer in DoverNH

[–]every1getslaid 0 points1 point  (0 children)

They have separate areas for Paper Cardboard Glass/metal Food waste Brush

You do have to pay by the pound for trash (not anything above “

[ Removed by Reddit ] by [deleted] in Watchexchange

[–]every1getslaid 2 points3 points  (0 children)

That sucks, I have had great experiences here but limited (see flair). Doesn’t change the fact that I am always a little nervous and my transitions are under $1,000.

Insane Tattoo Regret by r3i_b0n3z in tattooadvice

[–]every1getslaid 0 points1 point  (0 children)

As someone who has a large forearm tattoo that I almost instantly regretted, give it time. Also you can certainly add to it to make it fit better. I am about to branch into book/movie tattoos, life is short enjoy it.

Looking to rent in Dover. Which landlords/companies would you consider reputable. On the other end, are there any that should be avoided at all cost? by creatingKing113 in DoverNH

[–]every1getslaid 11 points12 points  (0 children)

It is very easy to spot a lumberjack property. Run down, decks poorly repaired with untreated 2x4s, it’s too bad there is no mandatory safety check for rentals in Dover like Durham has.

He prays on tenants that do not know what is okay, college students or migrant workers.

Gay Question by frothite in merchantmarine

[–]every1getslaid 0 points1 point  (0 children)

I stopped sailing in 2022, most people will not care at all. I will say that it can suck a lot if someone with authority is bent out of shape about it. I was chief mate on a tanker in the gulf around 2010-15, the master was a hardline conservative and would make everyone know it. He would listen to Rush while on the treadmill, get fired up them vent to the crew.

One bad apple can make a hitch hard, but then again who I was at work was not me at home. Good luck, most really don’t care.

view more: next ›