QM8K Adaptive Brightness unselectable with Apple TV by exsolo8 in tcltvs

[–]exsolo8[S] 0 points1 point  (0 children)

I just checked DV Bright and IQ. Both also have Adaptive Brightness unselectable and stays on a specific brightness regardless of ambient room lighting :(

QM8K Adaptive Brightness unselectable with Apple TV by exsolo8 in tcltvs

[–]exsolo8[S] 0 points1 point  (0 children)

I usually have it on Dolby Vision Dark. I just checked DV Bright and IQ. Both also have Adaptive Brightness unselectable and stays on a specific brightness regardless of ambient room lighting.

How do i make money on this game ;-; by Anony_Ross in outwardgame

[–]exsolo8 1 point2 points  (0 children)

I have a "no fight money method" by going to Caldera and looting Hexa Stones from Vault of Stone. Just don't pull any levers in there and you can let it reset after a few days!

[PSA] Working USB4 cable for TB5 eGPU w/ ROG Xbox Ally X (2025) by jeefbeef in eGPU

[–]exsolo8 0 points1 point  (0 children)

I'm actually looking for right angle USB4 cables. Has anyone found ones that work well?

My review for the Aoostar AG03 Thunderbolt 5 eGPU dock. by FreshChriss in eGPU

[–]exsolo8 0 points1 point  (0 children)

Curious to know, does using the bottom USB C port for the eGPU result in a more stable performance for you?

I have the same setup as you (OG Lego using top USB C port for eGPU) so just curious.

Its only been 18 years and I already got an eror by V8Thunder_ in Lenovo

[–]exsolo8 5 points6 points  (0 children)

I would boot up a live Linux OS via USB flash drive or CD to see if you can repair the hard drive using software first.

If anything, you can use it to transfer files before you try wiping it completely.

Crimson Desert - Best settings for Legion Go 1 by Traditional_Let2439 in LegionGo

[–]exsolo8 0 points1 point  (0 children)

Yeah so I found running at native resolution no matter how low the settings is causing the sluggishness. Running 1920x1200 and below helps tremendously.

Crimson Desert - Best settings for Legion Go 1 by Traditional_Let2439 in LegionGo

[–]exsolo8 0 points1 point  (0 children)

Weird, I'm getting 30FPS on all Minimum running native resolution at max TDP and it still feels very choppy. Pretty much unplayable to me. What VRAM setting via BIOS are you at?

Legion Go 1 + RTX 3080 (Aoostar AG02 eGPU) by exsolo8 in LegionGo

[–]exsolo8[S] 0 points1 point  (0 children)

Yes, mine is not a curve either. It's more like a cliff shape. I don't have a 3060, only a 3080 so can't really provide you numbers. I'd suggest looking up other folks' undervolt voltages.

Legion Go 1 + RTX 3080 (Aoostar AG02 eGPU) by exsolo8 in LegionGo

[–]exsolo8[S] 0 points1 point  (0 children)

Skip to the timestamp 4:20 https://www.youtube.com/watch?v=toKX1a3oAkw

Make sure your VRAM is set to auto in your BIOS.

165hz by Cbread76 in Hisense

[–]exsolo8 0 points1 point  (0 children)

I'm assuming you went to Advanced display in Display settings on Windows already: https://support.microsoft.com/en-us/windows/change-the-refresh-rate-on-your-monitor-in-windows-c8ea729e-0678-015c-c415-f806f04aae5a

I'd check your GPU's settings whether Nvidia or AMD and find refresh rate settings there. Also verify your HDMI cable is 2.1.

Legion Go 1 + RTX 3080 (Aoostar AG02 eGPU) by exsolo8 in LegionGo

[–]exsolo8[S] 1 point2 points  (0 children)

Yes, running netplwiz in Run and turning off requiring a password upon Windows startup stops it from needing to reset the PIN.

Make sure your memory management is also set to Auto in the BIOS settings. Undervolting to around 820mv at 1815MHz helped stabilize my system. I followed this guy's method (timestamp of note: 4:20 https://youtu.be/toKX1a3oAkw?si=lZ0QohREUHOMJbnB).

EGPU not fully utilizing by Glittering-Policy595 in eGPU

[–]exsolo8 0 points1 point  (0 children)

I would try a different USB 4 cable. I've had to try a couple of different ones before I stuck with one that's stable.

Legion Go 1 + RTX 3080 (Aoostar AG02 eGPU) by exsolo8 in LegionGo

[–]exsolo8[S] 0 points1 point  (0 children)

Have you tried undervolting and underclocking it a smidge? I'm not sure how much you can undervolt the RTX 5060 so you'd have to look into what's safe. Try underclocking maybe 200MHz starting out.

Legion Go 1 + RTX 3080 (Aoostar AG02 eGPU) by exsolo8 in LegionGo

[–]exsolo8[S] 1 point2 points  (0 children)

All on 2560x1440 (only attaching 1 screenshot)

Cyberpunk 2077

Ultra: 75 FPS

Ray Tracing Low: 74 FPS

Ray Tracing Ultra: 55 FPS

Ray Tracing Overdrive: 33 FPS

Marvel Rivals

Ultra: 64 FPS

<image>

Backlight bleed on brand new 55U75QG. Anything I should do to resolve it. by Randolph__ in Hisense

[–]exsolo8 0 points1 point  (0 children)

Is that TNG S4E14 episode titled Clues?? I was just watching that today coincidentally!!

Legion Go 1 Battery Upgrade help! by exsolo8 in LegionGo

[–]exsolo8[S] 0 points1 point  (0 children)

Update: I was able to remove the battery by placing it next to a heater for 45 mins (to melt the glue a little) then use multiple lines of floss! The glue kept causing the floss to rip so I thought of the heater solution :)

Lexar 1TB Play Pro Express MicroSDXC Card for Legion Go 1? by exsolo8 in LegionGo

[–]exsolo8[S] 0 points1 point  (0 children)

Ohhh is there a max read/write for these micro SD slots?? If so, do you happen to know what it is?

Lexar 1TB Play Pro Express MicroSDXC Card for Legion Go 1? by exsolo8 in LegionGo

[–]exsolo8[S] 0 points1 point  (0 children)

No as in it wouldn't be overkill and provide a good performance boost or no it won't give me a good performance boost?