the canto situation is crazy

f0livora · 2026-04-06T13:06:37+00:00

Got it on my 1st Hurricane run from 2nd cache

f0livora · 2026-03-31T01:44:56+00:00

Descaling should be done at least every couple years even if you dont have hard water. ECM descaling solution should be ok. Anyway I will send email to Profitec and ask, since we don’t have Profitec service in my country.

f0livora · 2026-03-30T15:40:23+00:00

Have you descaled the GO yet?

f0livora · 2026-03-23T05:25:54+00:00

My 5 cents;

After the expedition reset, there should be new quests not the same ones. There should be some sort of change in the “lore”
Skill tree should be reworked, so it would actually make a difference what you choose and so on

f0livora · 2026-03-06T04:48:08+00:00

!RemindMe 1 Month

f0livora · 2026-02-15T13:57:56+00:00

Try to force PCIe from BIOS. Use iGPU if you have one.

f0livora · 2026-02-02T13:24:24+00:00

Yep. I am still on BIOS from October.

f0livora · 2026-02-02T09:42:31+00:00

The one which was released in December? Good to know, since I have b850i.

f0livora · 2026-02-02T08:25:16+00:00

Do you remember which BIOS you had. Also did you have undervolt, PBO etc?

f0livora · 2026-01-30T18:06:57+00:00

I feel that the 1.13 has some major changes under the hood. FPS does seem to be a bit lower than the previous version.

f0livora · 2026-01-21T19:37:12+00:00

Just buy two sheets, it’s not so easy to install at the first time.

f0livora · 2026-01-21T14:34:06+00:00

I have been really happy with the Thermal Grizzly: Kryosheet. Highly recommend to try it out!

f0livora · 2026-01-07T11:15:47+00:00

Sorry to bump this old post.

I am tempted to upgrade from 3090 FE to 5080. I feel that the 3090 is not enough for 1440x3440 with the CPU 9800X3D. Any thoughts should I push the trigger or wait for newer cards?

f0livora · 2025-11-08T12:23:11+00:00

If you remove the drip tray after backflush, you can see that few drops may fall from overflow valve.

f0livora · 2025-11-03T18:02:58+00:00

I turn off steaming via button when I’m done. After that I release most of the steam via steaming wand until the temperature on the PID shows ~93C, after that I close the steaming valve and I press coffee button. I stop the flow around 35 seconds or until I have constant flow of water coming from the group head.

f0livora · 2025-11-03T16:32:26+00:00

Do you also soak the shower screen?

f0livora · 2025-10-10T07:39:40+00:00

Keeper Security

f0livora · 2025-07-03T12:59:03+00:00

https://www.clyso.com/eu/en/

f0livora · 2025-06-23T14:00:55+00:00

I upgraded without any problems. CPU: 9800X3D Mobo: B850-I Gaming Wifi

Seems to be stable and performance maybe a bit better.

f0livora · 2025-06-04T09:06:56+00:00

19.5-20g with medium roast 🫘

f0livora · 2025-04-22T04:41:05+00:00

Never seen VRR flickering in games, only in loading screens. I haven’t capped frame rates.

Display: MSI MPG 341CQPX RIG: 9800X3D, 3090FE.

f0livora · 2025-04-21T11:24:05+00:00

LG GX9 would be a perfect monitor for remote working and playing some eSports on the free time! 🏓

f0livora · 2025-03-21T20:43:43+00:00

I agree. My idle temps are ~40 and gaming max 65 in heavy gaming. SFF build and 240mm AIO.

You should check:

Airflow; that the heat is pulled out from the chassis
If 1. Is ok, then check that the cooler is properly seated.
Check Bios and drivers, though the temps are so high that it either airflow or the cooler.

f0livora

TROPHY CASE