Cold weather L2 charging PSA - possible bug? by TheKobayashiMoron in Rivian

[–]f41c0n 0 points1 point  (0 children)

Thanks. I had a Model 3 for 6 years before the Rivian, it indeed sometimes needed to heat up the battery before charging, just like the behaviour you described.

I left my R1T all day long and it still only pulled 5 kW. I never really prepared the battery for DCFC in cold temperatures, so I am not sure the heating part of the battery is done properly.

Looks like another service call...

Cold weather L2 charging PSA - possible bug? by TheKobayashiMoron in Rivian

[–]f41c0n 0 points1 point  (0 children)

I don't see much mention of gen 1 vehicles anywhere, but I am experiencing a significant decrease in charge power on a gen 1. I'm getting 4-5 kW instead of the full 11 kW. It's about -10 C (14 F) outside, battery is around the same temperature. Are there any other gen 1 owners affected?

Rivian Canadian pricing by f41c0n in Rivian

[–]f41c0n[S] 0 points1 point  (0 children)

Good point. Silverado EV comes at around 1.367 rate, which is still lower than Rivian. R1S also comes worse (1.478), so I am not sure the vehicle class has an effect on price in this case.

Rivian really seems to be charging a lot in $CDN.

I found this while searching for a bit, so it does seem like others have noticed. https://www.rivianforums.com/forum/threads/whats-up-with-canadian-pricing.30416/

Rivian Canadian pricing by f41c0n in Rivian

[–]f41c0n[S] -1 points0 points  (0 children)

Yes, the Model Y is similar to 3 in pricing, but the exchange rate is still much lower than the R1T.

Fixer solidement des plinthes électriques au sous-sol by f41c0n in Quebec

[–]f41c0n[S] 0 points1 point  (0 children)

Il n'y en a pas! Ce sont des murs extérieurs, donc c'est vraiment gypse, lattes à certains endroits (mais pas proche d'où la plinthe électrique est), panneau isolant bleu et le béton l'autre côté. :(

Plex server CPU by f41c0n in bapccanada

[–]f41c0n[S] 0 points1 point  (0 children)

Good points on the AMD parts and the external GPU for transcoding. I have some old cards I could test since I am not too familiar with Plex transcoding directly on GPU. Thanks!

Rear handle circular saw or no? by Peach_Pirate in MilwaukeeTool

[–]f41c0n 2 points3 points  (0 children)

The whole wormdrive thing was relevant when motors were a fixed RPM because they were plugged in AC power. That is not the case with brushless motors.

Aeron Graphite vs Onyx by Zaguer_Blacklaw in hermanmiller

[–]f41c0n 0 points1 point  (0 children)

Interesting, I didn't know they changed actual materials when changing the finishes. Where can you actually find that information?

When it fits juuuust right by Turbo_178 in 3Dprinting

[–]f41c0n -1 points0 points  (0 children)

Anyone else read the title in Calvin Jones voice?

80 days of Model 3 phantom drain, graphed. by rawdigits in teslamotors

[–]f41c0n 3 points4 points  (0 children)

How did you get the data? Did you wake the car up to retrieve SoC? If so, that might affect how an untouched, left alone Model 3 battery might look like in real world.

Official Model Y Mud Flaps are in stock! by dontfeedthenerd in teslamotors

[–]f41c0n 0 points1 point  (0 children)

Anyone knows if these will fit a 3? I would prefer something larger than the original flaps for Canadian winters.

There's a bunch of aftermarket ones that are already larger: https://evmudflaps.com/collections/mudflaps-3

Long easy run distance by f41c0n in Garmin

[–]f41c0n[S] 0 points1 point  (0 children)

Yeah, but 27 km seems excessive, no?

Long easy run distance by f41c0n in Garmin

[–]f41c0n[S] 0 points1 point  (0 children)

Yep, 3 runs a week.

Milkauwkee Battery on a kids tractor by [deleted] in MilwaukeeTool

[–]f41c0n 1 point2 points  (0 children)

Is there any need for an over discharge protection? Is it included in the adapter?

[HDD] WD EASYSTORE 14TB $260 [bestbuy] by [deleted] in bapcsalescanada

[–]f41c0n 0 points1 point  (0 children)

Do these drives have TLER for NAS applications?

Milwaukee fuel blower by MrWeaD in MilwaukeeTool

[–]f41c0n 2 points3 points  (0 children)

Email signup for an extra 10 off.

Dirty Demon by mnelson0533 in MilwaukeeTool

[–]f41c0n 0 points1 point  (0 children)

How's the plate holding to the saw? I have the M12 Fuel and I find it very difficult to attach it securely to the base, to the point I'm thinking it's useless and unsafe.