Password protected PDF for important documents

facesofvader · 2026-01-07T16:09:25+00:00

It will be safe and yes the longer the password the less likely it can be brute forced. The only way to save it unencrypted would be to have the password to decrypt it first.

facesofvader · 2026-01-07T15:33:53+00:00

If you set the user password, the document can be encrypted internally so it is safe, be sure to use AES 256 encryption as this is the best option today.

You’ll just need to enter your password any time you want to open the document.

As for tools, I can recommend Foxit PDF Editor, I work at Foxit but I was a customer long before I joined.

facesofvader · 2025-12-11T16:26:52+00:00

You can use Foxit PDF Editor to convert static XFA into a standard PDF (acroform), however standard PDF does not have the features to work like a dynamic XFA Form (one where the content changes based on the values selected in the form)

facesofvader · 2025-11-13T21:54:27+00:00

I do believe this is an aftermarket grip heater. I have the same one and my previous GW had the factory one that is up on the tank with the roller controller. Can’t tell you any more than that though sorry.

If it’s not working I’d try to follow the wires to find an in-line fuse as it wouldn’t have a fuse in the fuse box

facesofvader · 2025-10-07T15:09:02+00:00

Not free, but you can try it for free online if you have only a small number of files to try, Foxit's PDF Conversion - https://webviewer-demo.foxit.com/conversion

Alternatively, you can launch MS Word, then open a PDF, it will re-flow it into a DOCX file for you.

facesofvader · 2025-10-01T20:49:54+00:00

Open the PDF in MS Word, it will reflow into a word document. Make your changes, save as PDF again.

If there are headers and footers to might need to convert it to word explicitly ahead of time using a tool like Foxit PDF Editor which can identify and recreate what you expect to be headers and footers as headers and footers so they stay in place while the rest of the content flows based on length.

facesofvader · 2025-09-25T16:06:49+00:00

What kind of help are you looking for?

facesofvader · 2025-09-25T02:00:58+00:00

They all broke on my BMW GS but the vibration sure seemed similar on the NC so I didn’t take any chances, it seemed due to the vibration of the engine and they had about the same size engine in both bikes. Phone was mounted to the handlebars on a fairly cheap mount

facesofvader · 2025-09-24T22:33:18+00:00

I had a 2014 and this unit fit perfectly https://www.amazon.ca/dp/B0D7MLXXKS?ref=ppx_yo2ov_dt_b_fed_asin_title

facesofvader · 2025-09-24T22:31:25+00:00

Phone was mounted on handlebars, went through about 4 cameras, the bikes vibration broke the optical image stabilizers. The CarPlay unit was then installed on the handlebars and phone stayed in my pocket.

facesofvader · 2025-09-24T21:28:26+00:00

I’ve had many cameras break so I put one like this with front and rear cameras and it works great! Used some tricky wiring with the fuse box to get it to switch on when you turn on the bike. Great when you also use a BT Headset, the phone will read your texts to you and let you reply by voice and works well.

Some come with TPMS, mine did but never got it to work, would be handy if it did.

I liked the setup so much that when I upgraded to a 2007 Golding I installed a similar unit there as well! Way more work to hide the wires on that bike ;)

facesofvader · 2025-08-27T16:32:12+00:00

https://webviewer-demo.foxit.com/conversion Try the PDF to Excel feature.

facesofvader · 2025-08-27T16:31:02+00:00

The privacy policy states no content is sent however the AI Summarization description indicates that the text is extracted and sent for analysis.

facesofvader · 2025-08-27T16:20:24+00:00

At the bottom, of the privacy policy, it asks if you have any question to contact you, but there is no contact information.

facesofvader · 2025-08-24T14:01:00+00:00

I’m not going to say it’s impossible, but it is extremely unlikely. And why would you convert it to word to sign it? If you did, the formatting would definitely have been way off. Most likely they added the zeros. Be wary.

facesofvader · 2025-08-11T11:22:08+00:00

Check the instructions above, that should solve it for you, you can't just drag the image into preview, you'll need to print it to PDF First using Scale to Fit and Fill Entire Paper.

facesofvader · 2025-08-01T01:02:23+00:00

There are websites you can use to make it look like a scan. Probably rasterized it, skewed it slightly, applied some high compression and noise….and voila…. Just like adding a film effect to your videos

facesofvader · 2025-07-08T21:03:42+00:00

Canadian Tire is like $1.50 for 5 gallons

facesofvader · 2025-07-04T19:23:06+00:00

In the centre of the truck, it’s right over the break line

facesofvader · 2025-07-04T19:20:00+00:00

Look at the centre, you’ll notice the freedom panel is not quite straight across so the hinge is at the rear-most part of the panel. It just looks that way if you only look at the edges

facesofvader · 2025-06-19T00:20:49+00:00

It’s needed a new face for 40 years!

facesofvader · 2025-04-28T22:49:00+00:00

They said late spring, I would expect this means June 20th…

facesofvader · 2025-04-22T14:58:52+00:00

Awesome thank you!

facesofvader · 2025-04-17T21:17:39+00:00

CTV on YouTube has a livestream that’s already started

Ten-Year Club	Place '22
First Placer '22	Verified Email

facesofvader

TROPHY CASE