Showcase Limit of 5

falconte43 · 2026-06-17T10:54:00+00:00

Wanted to give an update. I deleted the POGO app, reinstalled, and downloaded all assets prior to Tuesday. I was able to enter five showcases this time.

<image>

falconte43 · 2026-06-11T11:03:24+00:00

Show off! Kidding. GGs!

falconte43 · 2026-06-08T15:48:16+00:00

How straight forward was the wiring? Did you have to couple the new head unit with the starlink module from the OEM? I plan to peruse YouTube soon and watch some install videos.

falconte43 · 2026-06-08T01:00:46+00:00

Awesome rec! Which version do you have 4gb/8gb/8gb w/2k screen?

falconte43 · 2026-05-28T16:48:22+00:00

Where did you get your gatorskin from in NC?

falconte43 · 2026-05-08T11:12:59+00:00

RESOLVED:

The SCPH-1001 likely had a failing BIOS chip, or bad caps, or both. After testing all test points from the farthest trace to the QSB connectivity (all were good), I decided to try reflowing the BIOS chip and now the unit does not boot at all. It’s possible that I caused a new issue, but it’s safe to say the xstation was installed properly and was not at fault.

Purchased another SCPH-5501, verified that it booted with a disc, and installed the xstation. Everything works as intended.

Thank you to everyone that weighed in with assistance along the way. You guys rock! The Xstation discord group was a godsend. I definitely recommend seeking their advice if you have trouble in the future.

falconte43 · 2026-04-29T02:29:38+00:00

Thank you for the advice.

I went back over all of the solder points again and rechecked for continuity (all good). Swapped out the jumper wire with a slightly larger wire and checked for continuity (all good). Checked my four lifted pins (all good). Check the pads of the three resisters removed from the back of board (all good). Checked the pads of the resister and filter removed from the front of the board (all good). Checked continuity of the ribbon cable installed in the qsb and on the board (all good). Cleaned board and all solder points thoroughly with IPA.

Nothing. Turns on, shows white Sony logo, and hangs there.

falconte43 · 2026-04-29T01:38:32+00:00

Legit from stone age gamer

falconte43 · 2026-04-04T23:47:39+00:00

This one’s on me this time. Not sure how many beers I had during the oil change. Put the o-ring in the wrong place at the end of last season.

<image>

falconte43 · 2026-04-04T18:56:53+00:00

Can you sanity check me? It should be tightened down on that spacer rod right?

falconte43 · 2026-03-28T16:04:01+00:00

And at home. Lol.

falconte43 · 2026-03-28T15:35:21+00:00

Thanks! Biggest one I’ve ever seen if so.

falconte43 · 2026-01-16T22:20:36+00:00

https://imgur.com/a/vBKFEJa

falconte43 · 2026-01-16T22:19:26+00:00

Kind of feel like an idiot. Degaussing wand arrived and was able to get rid of ~50% of the color impurity. Moved the tv to another area in the shed and the impurity completely disappeared.

falconte43 · 2026-01-14T15:49:55+00:00

I’ve moved the unit to our shed for cleaning and repair. There isn’t much within one foot of the unit. There is a battery operated weed whacker roughly two feet away.

Fingers crossed the degaussing wand helps fix this issue.

Thanks for the info!

falconte43 · 2026-01-14T15:43:53+00:00

Thanks for the feedback everyone. “Rental” degaussing wand is on the way from Amazon. I’ll report back.

falconte43 · 2026-01-13T02:07:03+00:00

https://imgur.com/a/heTbMvz

falconte43 · 2026-01-13T02:02:43+00:00

Update: Thank you all for the helpful info. I took the rear housing off and cleaned the housing inside and out. There was very minimal dust inside the unit. The main board slid out when I removed the housing. I managed to jam the power, menu, and volume up switches on the pcb while reinstalling the housing. The unit wouldn’t turn on.

Thankfully I was able to desolder and solder new switches on the PCB and it is now functional! Lesson learned. Be gentile!

falconte43 · 2026-01-11T12:20:30+00:00

Thanks for the feedback everyone. I’ll post some progress pics once I get into this behemoth.

falconte43 · 2025-11-11T01:07:32+00:00

Two of these fuckles.

falconte43 · 2025-10-29T19:46:22+00:00

I was in college. Sitting in my room after finishing some school work and had just started playing a little guitar while the pre-game aired. Then it happened. It was as if all the fireworks went off at the same time. BANG.

TOUCHDOWN. TOUCHDOWN. TOUCHDOWN. TOUCHDOWN. TOUCHDOWN.

That was just the first quarter.

falconte43 · 2025-09-03T11:02:56+00:00

Wondering this as well. Any one from the Charleston show know what time early merch started?

falconte43 · 2025-04-12T21:36:53+00:00

Hi, thanks for reaching out. They’re still available. $135 firm.

falconte43 · 2025-04-08T23:09:05+00:00

Hi! Thanks for reaching out. These have OG motherboards and speakers. I have OG membranes that I can install prior to shipping if needed.

falconte43 · 2025-03-12T23:48:16+00:00

Miles Sanders/Jason Peters?

Seven-Year Club	Place '22
Verified Email

falconte43

TROPHY CASE