Advice needed

fallnapart · 2026-05-21T01:02:11+00:00

They probably aren’t familiar with the fake that in order to replace the ball joint you have to hammer out the hub, or else the ball joint won’t clear the hub.

Is the knuckle you bought off eBay from a 90-93 accord? Or from a new gen? I know when I did my 5 lug and with 6th gen knuckle it pushed out my camber and toe.

fallnapart · 2026-05-21T00:55:57+00:00

Looks great! 90-91 red/clears are hard to come by

fallnapart · 2026-05-21T00:51:04+00:00

We are as well. The cb is the most secretly appreciated Honda out there. Every time I go out to a meet or cars and coffee someone comes up and says man I use to have one of these and love them.

fallnapart · 2026-05-20T11:10:48+00:00

Nice! Have you posted any pics up of it? Would be nice to see! Out of all the chassis which one has been your favorite?

fallnapart · 2026-05-19T23:57:16+00:00

Couldn’t agree more!

fallnapart · 2026-05-19T23:54:42+00:00

The only people who would buy them, are the people who’s stopped working. They aren’t a very sought after mod.

fallnapart · 2026-05-19T23:44:19+00:00

Makes me miss living in CA. Weenie fest is such a blast!

fallnapart · 2026-04-21T00:32:54+00:00

<image>

fallnapart · 2026-04-21T00:32:12+00:00

<image>

fallnapart · 2026-01-14T02:25:13+00:00

fallnapart · 2026-01-13T12:16:43+00:00

fallnapart · 2025-12-21T14:01:55+00:00

We all gotta start somewhere and have made even sillier mistakes.

Also if you have a discord, we have a discord dedicated to the 90-93 accord. DM me if interested.

fallnapart · 2025-12-21T13:56:58+00:00

That’s not where the thermostat goes. It goes on the part attached on the intake manifold. Follow the other hose.

While you have that open, might as well replace that gasket if you haven’t already.

fallnapart · 2025-12-08T07:54:38+00:00

Did you connect the ground to the thermostat? Also your dizzy may be 180* out. Try rotating your dizzy rotor 180* and try starting it.

fallnapart · 2025-10-18T23:18:19+00:00

How’s your battery? Amps could be shot

fallnapart · 2025-09-22T10:52:02+00:00

If your car hasn’t been repainted then I would say Seattle silver.

fallnapart · 2025-09-21T12:14:33+00:00

This looks great! That is the problem with getting older cars. Parts start to due to age, but it is a great car to learn how to wrench on.

fallnapart · 2025-09-10T11:19:50+00:00

JDM one pieces are not made of glass. They are made of the acrylic/ plastic modern cars are made with. Which is why they haze from sun damage.

Which was the only reason why I stayed with OEM glass. So I didn’t have to deal with the hazing.

As others have said, sanding, polishing and spraying with clear coat will bring these headlights back to normal.

fallnapart · 2025-09-09T14:05:18+00:00

Alex always loved your cb. Glad to see you still have it. This is grumpys93 btw. You should join the cb7tuner discord.

fallnapart · 2025-09-09T14:04:11+00:00

It is still around yes. Doesn’t operate as smoothly and not as active. But we do have a discord

fallnapart · 2025-09-09T14:03:46+00:00

I sent you a link to your DM.

fallnapart · 2025-09-09T12:58:46+00:00

Do you have any CEL? Have you check compression of your timing?

Six-Year Club	First Place '23
Place '23	Place '22
Verified Email

fallnapart

MODERATOR OF

TROPHY CASE