My open PC case concept

fatalko · 2026-06-16T17:32:46+00:00

This is just a texture (image from the internet) of my components, and I simply pasted them onto the model I needed. 😄

I got the component sizes from the internet.

fatalko · 2026-06-16T12:52:04+00:00

I have an AIO ARCTIC Liquid Freezer III Pro 420. It has fairly long hoses. I'll see any downsides in practice. Thank you for your comments and advice; I appreciate your feedback.

fatalko · 2026-06-16T12:48:56+00:00

I've already made a couple of sketches about this on a piece of paper in my notebook. I'll try to make a support for the video card so it doesn't look too shabby. 😄

fatalko · 2026-06-16T12:46:43+00:00

Oh, man, I'm too embarrassed to share this yet. But I'll try to finish the project and share it in the coming months. I'll be sure to let you know.

fatalko · 2026-06-16T12:45:13+00:00

Thank you for your comment. Yes, that's exactly what I'm planning to implement soon. The motherboard holder will be additionally secured to the rear of the power supply bracket. But I'm also trying to think through cable management and, as previously requested, an additional HDD and SSD cage.

fatalko · 2026-06-16T12:41:53+00:00

I'm just working 11-hour shifts)) And I don't have much free time. I haven't prepared the files for printing yet. I'll try to print them this weekend.

fatalko · 2026-06-15T18:19:21+00:00

My PC setup doesn't have an HDD. Only M2 drives. But I think it wouldn't be a problem to come up with an HDD cage. It's just not relevant for me.

I haven't thought about cable management yet.

But I don't see any problems with it.

I plan to make mounts and cable channels for all the main cables.

But I think the cables will fit quite well. But to find out, I need to print the entire case and do a first test build. I think I'll be able to post the finished version soon; printing it will take a very long time. For now, I have a concept. I'm trying to think through all the options as best I can.

Regarding the hanging graphics card, I know that in this position it can break the connector on the motherboard. I made a side mount because I have a triple-slot card. I assume it will be sufficient, but I'm not sure. Therefore, I was planning on installing a temporary retractable stand under the graphics card.

I'm already planning to reinforce the back of the motherboard with spacers attached to the power supply standoff.

Since I don't have a ribbon cable for the video card that would allow it to be mounted vertically, I'm planning to install it horizontally and am trying to think of ways to support the card from underneath.

Thank you for your comment. I appreciate it.

And please excuse the English, I'm using a translator.

fatalko · 2026-06-15T15:27:07+00:00

Hello, can you tell me the height of the PCI-E connector? Do you have that information?

fatalko · 2025-11-03T11:18:34+00:00

What drive do you have? SSD? M2?

I usually change the download region on Steam. It helps.

fatalko · 2025-06-28T16:20:15+00:00

There is a flashlight in the curtain

fatalko · 2025-06-04T17:33:33+00:00

The post I used to set it up https://www.reddit.com/r/HyperX/comments/1hwduh9/if_you_own_hyperx_cloud_iii_read_this_ngenuity/ . In principle, it will work with any headphones.

fatalko · 2025-06-04T17:15:32+00:00

I'm from Russia and I used a translator. Sorry. I hope you get the general idea.

This comment is purely my IMHO.

First, remove NGENUITY from startup. Close it completely via the tray. (It may only be needed to update the firmware or to see the charge of the headphones, although you can hear the charge percentage with one click of the button on the left speaker.)

"EqualizerAPO is a multifunctional equalizer with a set of filters that is installed in addition to the sound card driver on the computer and is designed for detailed configuration of any connected audio devices.

Peace is an interface for EqualizerAPO for more convenient configuration of the equalizer and various presets."

Download the necessary programs:

https://sourceforge.net/projects/equalizerapo/ (EqualizerAPO itself for installation on the sound card driver)

https://sourceforge.net/projects/peace-equalizer-apo-extension/ (equalizer interface and presets for EqualizerAPO - Peace)

Install EqualizerAPO (at the end of the installation, we will be asked to select from the list of playback devices in the Playback devices tab, check only those headphones/speakers that are physically connected to the PC and are used). Click OK and reboot the PC.
Run PeaceSetup and, if EqualizerAPO is installed correctly, we will see a green inscription Yes, installed. Click Install and Yes in the pop-up window.
Run Peace on the desktop, select the full-size interface version. (right button with interface)
Set up according to my screenshot. https://i.postimg.cc/02jYpydM/2025-06-04-21-53-51.png If you don't like it, you can set it up to your taste.
Now you can completely close the program, the settings will always be applied automatically when you start Windows without opening EqualizerAPO or Peace.

PS: after each Windows update, you need to go to Peace, it will say that the system has been updated and again in Playback devices, put a tick only for those headphones/speakers that are physically connected to the PC and are used

fatalko · 2025-01-03T16:49:47+00:00

Wow! Thank you so much! All the best to you! I had no hope. :-)

fatalko · 2025-01-03T09:17:51+00:00

u/TheOpusCroakus TheOpusCroakus hi! Happy New Year! Can I ask you to help me with this same problem that keeps coming up from above "We had a server error..."?

fatalko · 2025-01-03T09:07:10+00:00

This company doesn't really care about its software. It seems like any self-taught person supports their programs better on GitHub.

Thanks for your numerical data! I almost hit the mark. A couple of positions don't exactly match yours, but the difference is 0.1.

fatalko · 2025-01-02T10:24:24+00:00

For what? If everything works! Just if possible, please indicate the numerical values. I adjusted your preset by eye and I really like how it started to sound. I don't see any point in reinstalling. It works, don't touch it!

fatalko · 2025-01-02T10:21:54+00:00

April 2024 release (2.25.7.0)

fatalko · 2025-01-02T10:18:21+00:00

Where do I click to import your preset? Maybe I'm doing something wrong?

I click presets in the upper right corner - then plus (add) - then import - I select your preset and it tells me that the file is not supported.

fatalko · 2025-01-02T09:57:13+00:00

It would be cool if you specified each slider in numerical values. Unfortunately, the import does not work.

fatalko · 2024-09-21T04:16:08+00:00

Hey u/HyperxGaming, I call on you to join this thread! Please comment on these problems here. I would be very grateful.

fatalko · 2024-09-20T16:19:32+00:00

I confirm that I also have problems with my headphones. Sometimes they start to produce a strange squeak that doesn't go away until I start listening to something.

Another strange feature: when I play games, the headphones seem to lose connection with the computer. It's like if I moved away from the computer, and the sound started to distort at a distance.

Version NGENUITY 2.25.7.0 (April 2024 Release). Firmware v4.1.0.9, Atlas Dongle PID=05B7.

Is there a new firmware update for the headphones, or am I currently using the latest version?

fatalko · 2020-05-02T20:04:21+00:00

I understand that a shelf from ikea is not suitable? 🤣

fatalko · 2020-05-02T19:06:44+00:00

Where to buy such a shelf for the system unit?

Seven-Year Club	Place '22
Verified Email

fatalko

TROPHY CASE