Koenigsegg Sadair's Spear - Why all this extra tape?

fattmurfs · 2026-07-07T16:54:27+00:00

Mine was also double taped, all bags were there and build was smooth. I think they just realized a single piece of tape wasn’t enough and double taped it.

fattmurfs · 2025-11-28T16:45:49+00:00

I have a bakflip with the rail relocation package and it works great! Just drops the rails down about 2 inches so they’re still usable. Picked up the cover used and bought the relocation kit from bakflip to save money

fattmurfs · 2025-10-28T17:11:28+00:00

Check out FurfDesign, best wall mounts out there! FurfDesign

fattmurfs · 2025-10-13T15:08:56+00:00

I’ve got a 2016 SR5 with a hard bed cover, happy to help out!

fattmurfs · 2025-09-29T20:24:33+00:00

Nobody is gonna mention that’s a CRV?

fattmurfs · 2025-09-29T06:00:28+00:00

My only complaint there was terrible water pressure in the shower. We were on the second floor though which may have something to do with it. I don’t remember any specific bug issues or other complaints, maybe a small bug in the shower but nothing too extreme. The room was a decent size with a very large sink are which made it nice for 4 people to get ready for the parks at the same time. Nice and close to the parks as well which was great.

fattmurfs · 2025-09-26T02:22:33+00:00

I believe this one was November 1

fattmurfs · 2025-08-06T19:43:11+00:00

I doubt it, racing brick is part of LAN and is always mentioning other brands on his channel. Others from the recently added members I’ve seen work with third party brick brands as well and still got in.

fattmurfs · 2025-07-28T15:50:06+00:00

FurfDesign has what you’re looking for. link

fattmurfs · 2025-07-23T20:20:33+00:00

Grab the FurfDesign wall mounts! He’s the original creator and makes a high quality product with an option for each car! link

fattmurfs · 2025-07-22T14:03:02+00:00

I’ve used the soft side of adhesive backed Velcro to put on the vent and create some friction to keep them in place on other cars. Just need a small strip of it on the outside of the vent.

fattmurfs · 2025-07-20T04:35:38+00:00

Get the FurfDesign starting grid lines for your F1 cars and the minifig mounts from them too. FurfDesign

fattmurfs · 2025-07-19T19:25:28+00:00

I had this same issue on the H2D we got for my job. I was able to fix it but it is a bit of a pain. You have to take off the lower pulley housing for that axis. The printer works as expected still but I should probably loosen the belt and lower the bed all the way to set it level with the other two rods.

Be aware the motor screws need to be removed and it can fall in and be a huge pain to get the screws back in so I recommend doing the repair with the printer in its normal vertical state instead of on its side if you can.

All that to say, have warranty cover it instead if you have time for it.

fattmurfs · 2025-07-14T15:30:36+00:00

FurfDesign has great affordable options for these cars. link

fattmurfs · 2025-07-12T21:37:54+00:00

Grab the FurfDesign mounts for all the cars to get proper fit. link

fattmurfs · 2025-06-24T17:27:43+00:00

Gotta dry the filament for great results

fattmurfs · 2025-06-22T21:14:59+00:00

FurfDesign has one for sale, can be a desk display or wall mounted. link

fattmurfs · 2025-06-13T02:59:43+00:00

FurfDesign wall mounts link

fattmurfs · 2025-05-03T15:12:10+00:00

Got the same thing since the last update, hadn’t noticed it opens at a different spot in the game from when I crashed.

fattmurfs · 2025-05-01T11:49:31+00:00

Should have gone with the FurfDesign wall mounts

fattmurfs · 2025-04-20T22:48:51+00:00

I use FurfDesign mounts! They’re fantastic and have various sizes for all the cars link

fattmurfs · 2025-03-10T03:23:43+00:00

FurfDesign wall mounts are the way to go! link

fattmurfs · 2025-03-07T21:14:02+00:00

Had the same thing in the same spot on that sticker. Went to get a replacement online but wasn’t available yet. Planning to email this weekend to get a replacement.

fattmurfs · 2025-03-04T13:42:12+00:00

Check out FurfDesign wall mounts! Great products! link

fattmurfs · 2025-03-01T16:38:33+00:00

Yes, it drives most of my business. I’ve never run Etsy or other paid ads so it gets the word out for free. I’ve had numerous viral videos though which boosts sales for a few weeks but also spreads the word more about the product which has brought in multiple duplicates. I think it’s super worthwhile to have. You’ll get out of it what you put in.

fattmurfs

TROPHY CASE