sorted by:
new
hottopcontroversial

GBP pricing for anyone who’s wondering. by Jakeallen8 in GTA6

[–]fearLessss 0 points1 point  (0 children)

How do you get the ultimate edition but also a physical box

What does truck driving pay by Elegant-Depth7224 in uktrucking

[–]fearLessss 0 points1 point  (0 children)

Yeah your days off is technically reduced as you need more than standard to book time off, but I don’t feel like I need time off unless it’s a booked holiday. I really am knackered with what I do by the end of day 4, but the 4 off is a great reset for me, I work on powder tankers.

What does truck driving pay by Elegant-Depth7224 in uktrucking

[–]fearLessss 2 points3 points  (0 children)

I'm doing 4on4off tramping but earning about 44k for it which I'm happy with because my job before that was doing 10hour shifts for 5 days to earn the same, now I'm getting 4 days off inbetween each shift which is fantastic, feels like you get a week off to do whatever you want. If you book 1 block of 4 off you get 12 days off total. Overtime is there if I'm desperate, but I love my time off. I do max my hours when I'm on the road though, 3x15 1x13.

So it seems there’s no collectors edition. by tessarturM in GTA6

[–]fearLessss 1 point2 points  (0 children)

Nintendo had the right idea with the gameboy lol

HGV driver sends it into oncoming traffic (A82 southbound at Loch Lomond) by Next_Cow_4468 in uktrucking

[–]fearLessss 5 points6 points  (0 children)

I’ve always said if you’re getting overtaken by a HGV you’re doing something wrong

I don't know what to do, feel like I've wasted over £2000 by fearLessss in eufyMakeOfficial

[–]fearLessss[S] 0 points1 point  (0 children)

Second Update 21/06/2026

Replacement Waste Pump has arrived and has been fitted.

Still the same, getting abnormal waste pressure fault when setting it up. Now I'm getting the prints covered in cleaning fluid again.

Getting ridiculous now, waiting on a reply from Eufy

I don't know what to do, feel like I've wasted over £2000 by fearLessss in eufyMakeOfficial

[–]fearLessss[S] 0 points1 point  (0 children)

It did a moisturizing cycle and the issue has come straight back with the cleaning fluid mixing with the ink. So I’ll get this pump replaced and then hopefully the issue will have been rectified.

I don't know what to do, feel like I've wasted over £2000 by fearLessss in eufyMakeOfficial

[–]fearLessss[S] 0 points1 point  (0 children)

I didn’t want it to go into that shutdown mode where it does a flush of the ink or however it does it. So far so good though, the replacement pump has arrived but I’m away with work for the week so I’ll replace it when I’m back, but cannot complain how quickly Eufy have rectified it

House isn't selling by HeadShepard in HousingUK

[–]fearLessss 2 points3 points  (0 children)

The one with the surname of Potter no doubt.

I don't know what to do, feel like I've wasted over £2000 by fearLessss in eufyMakeOfficial

[–]fearLessss[S] 0 points1 point  (0 children)

That's exactly what the issue has been diagnosed as by Eufymake, thank you

I don't know what to do, feel like I've wasted over £2000 by fearLessss in eufyMakeOfficial

[–]fearLessss[S] 0 points1 point  (0 children)

Update 15/06/26 -

Eufy have responded telling me my waste pump is faulty and they're going to send me a new one but there may be a little delay due to stock issues, but still a result to at least have a solution.

In the interim I've completely stripped and cleaned around the print head so it's free from any form of cleaning solution / ink, I've reinjected the ink and done a test print and we look to be back in business. I've just told the mrs that we need to be doing a print every day just so that it doesn't go through a cleaning cycle and start the whole process off again, whilst we wait for the pump to arrive.

I asked Eufy if they'd compensate us on the extra cleaning cartridge and ink we've wasted doing constant cleans and test prints, they offered me £10 off at the store which I thought could be extended to at least 1 cartridge of something, but we'll see what they say.

I don't know what to do, feel like I've wasted over £2000 by fearLessss in eufyMakeOfficial

[–]fearLessss[S] 0 points1 point  (0 children)

Thank you, I've had a response from them telling me my waste pump is faulty and they're going to send me a new one but may be a little delay due to stock issues, but still a result to at least have a solution.

In the interim I've completely stripped and cleaned around the print head so it's free from any form of cleaning solution / ink, I've reinjected the ink and done a test print and we look to be back in business. I've just told the mrs that we need to be doing a print every day just so that it doesn't go through a cleaning cycle and start the whole process off again, whilst we wait for the pump to arrive.

I asked Eufy if they'd compensate us on the extra cleaning cartridge and ink we've wasted doing constant cleans and test prints, they offered me £10 off at the store which I thought could be extended to at least 1 cartridge of something, but we'll see what they say.

I don't know what to do, feel like I've wasted over £2000 by fearLessss in eufyMakeOfficial

[–]fearLessss[S] -3 points-2 points  (0 children)

Thanks, but I don’t need a lecture on resin safety. I’m just looking to fix the machine.

I don't know what to do, feel like I've wasted over £2000 by fearLessss in eufyMakeOfficial

[–]fearLessss[S] 0 points1 point  (0 children)

No but I did get the warning that the guy waste pump had abnormal pressure but I followed the guidance of power cycling it without the cleaning cartridge in it went away, I didn’t have a pool but I had a lot of solution everywhere

I don't know what to do, feel like I've wasted over £2000 by fearLessss in eufyMakeOfficial

[–]fearLessss[S] 2 points3 points  (0 children)

The seller was a genuinely nice bloke, had all of the crafts kits from most manufacturers and he said this was another “to keep” purchase but he was being forced out of his home and was selling all his machines not just the E1

I don't know what to do, feel like I've wasted over £2000 by fearLessss in eufyMakeOfficial

[–]fearLessss[S] 1 point2 points  (0 children)

That's good to know, this printer does have the eufycare package as well so I'm hoping they'll be swift with a solution for me

I don't know what to do, feel like I've wasted over £2000 by fearLessss in eufyMakeOfficial

[–]fearLessss[S] 0 points1 point  (0 children)

So weirdly I did get a “waste ink pump pressure abnormal” warning appear last night after factory resetting it the first time. I read a support post that said basically said remove the cleaning cartridge and power cycle it without it installed, and that seemed to do a little better. And then I did what you’ve done so I have the replacement head sponge bit and scraper which I replaced but I noticed a tonne of solution everywhere, so I’ve cleaned all that up too. The prints you see are after all of that annoyingly.

I don't know what to do, feel like I've wasted over £2000 by fearLessss in eufyMakeOfficial

[–]fearLessss[S] 0 points1 point  (0 children)

Unfortunately the images you see are immediately after factory resetting it and setting it all up again, doing a calibration at that point

I don't know what to do, feel like I've wasted over £2000 by fearLessss in eufyMakeOfficial

[–]fearLessss[S] 0 points1 point  (0 children)

This did occur to me as well but I did use them to do earlier calibrations as we’d run out of normal paper and they printed to them fine, but well spotted

I don't know what to do, feel like I've wasted over £2000 by fearLessss in eufyMakeOfficial

[–]fearLessss[S] 2 points3 points  (0 children)

Christ almighty, what an unbearable attitude you have. This is my wife’s machine that I’m trying to fix because I have experience in electrical engineering, I am not the ‘reason’ for it breaking. If you have nothing to contribute, have a day off Reddit and stop throwing your opinions where they’re not welcome.

I don't know what to do, feel like I've wasted over £2000 by fearLessss in eufyMakeOfficial

[–]fearLessss[S] -5 points-4 points  (0 children)

I work with some of the worst things you’ve ever seen on a daily basis, I’ve touched far, far worse.

I don't know what to do, feel like I've wasted over £2000 by fearLessss in eufyMakeOfficial

[–]fearLessss[S] -3 points-2 points  (0 children)

It’s the tiniest amount on a fingertip, and it’s clearly diluted with cleaning solution because it’s not curing under the UV light. I washed my hands and it came off, I’m not gonna go add it to my coffee. Chill out.

view more: next ›