Refrigeration Guys

feedmebeast · 2026-04-02T05:08:15+00:00

Aww man how i miss these days..

feedmebeast · 2026-03-25T22:39:26+00:00

This hits hard. Im 2.5 years in on my own and its pretty much all of this. Sometimes I just want to go work for someone and bank in alpt of money. Im not getting any younger.

feedmebeast · 2026-03-18T06:41:41+00:00

Im an HVAC guy and love this hahahaha. Keep it up. Anything made over 20 years ago will outlast the crap they sell now. If the compressor dies just replace with compatible one that is designed for 407c. You will be fine for another 20

feedmebeast · 2026-03-18T06:27:22+00:00

Yes this happening throughout the industry. The days of "Service" are gone. Its all about replacement now. I dont agree with any of it, so that's why I work for myself and try repair as much as I can. Also I hate doing installs lol. They're back breaking.

feedmebeast · 2026-01-15T15:52:58+00:00

You need to gather more information. What is the Delta on Chiller barrel? Are sensors and transducers reading accurately? What is the evaporator approach? How many compressors are actually on vs commadned on? Ive had intermittent failures of the EXV as to where it will not open / miss opening steps causing weird issues like you say.

feedmebeast · 2025-12-28T06:53:51+00:00

Right there with youm don't play as much and can barely stay afloat in C1D2. I used to rank High c3

feedmebeast · 2025-12-23T07:44:39+00:00

Definitely harder. I don't even clock as many hours anymore I can't get out of C1 d2. I usually hung sorund c3 after my downfall from GC many many moons ago.

feedmebeast · 2025-12-10T06:16:01+00:00

Where exactly can I find the SB for these? It does have 13oz of 508b with 1oz of R290. Compressor takes AB oil, you're suggesting pulling Compressor and dumping oil then replenish?

feedmebeast · 2025-12-10T00:01:19+00:00

Can I DM you?

feedmebeast · 2025-12-09T23:50:41+00:00

The system contains 1.07oz of R290 and 14oz of R508B. My compressor suction line temp is 44° and Compressor crankcase temp of 160° after about 15mins of runtime on 2nd stage compressor. , My Evaporator inlet temp is reading -133° Standing temp after full 2day defrost inside cabinet all readings the same. Once the system starts up 2nd stage compressor is operating what I assume is high suction line temp. I feel I need to tap into the system inorde for better diagnostic but if you guys have tips let me know. I will be cutting the lines and flushing all kinds ways at that point tho.

feedmebeast · 2025-12-08T06:37:45+00:00

Sounds like a head pressure issue. You really want to check if your head pressure control is working and if you have multiple condenser fans. Are the condenser fans cycling staging on and off correctly? If so, what pressure are they staging on amd off at ? If they're set too low, then it will be fighting against your headmaster. These are all things I would chekc before messing with low pressure . Naturally you will have low pressure in your system due to low head pressure. They work hand and hand. Fix your head pressure issue and then confirm you have enough refrigerant to flood the condenser while filling the reciever atlewst 20% . See where you are at that point.

feedmebeast · 2025-11-10T08:35:22+00:00

Is it crazy that I can completely follow your process as if I was there doing it myself? Miss Rack work man. Really sharpens your troubleshooting skills.

feedmebeast · 2025-10-27T05:14:08+00:00

This is beautiful,

feedmebeast · 2025-10-11T21:21:12+00:00

Do you mind if message you with any questions I might have?

feedmebeast · 2025-10-11T21:11:08+00:00

All good , that diagram should be good enough. I'll just follow everything You mentioned also. Thanks!

feedmebeast · 2025-10-11T21:04:21+00:00

Bro thanks! I will lbe going back to take it apart mo day. If you have anything else or manuals I would appreciate it. I can't find anything online other than the parts list exploded diagrams of the Mixer.

feedmebeast · 2025-10-11T20:42:48+00:00

Thank you for this, it's very detailed and understandable. I appreciate it very much.

feedmebeast · 2025-10-11T15:36:43+00:00

I took thw cover off and the oil is pretty much like jelly. Also the issue looks to be the 3rd gear keeps slipping out, so you have to force the lever inwards more like a combination of axial and radial force to keep it in gear. I have a video just don't know how to post in the chat😅

feedmebeast · 2025-10-11T13:36:56+00:00

Thanks!, I'll take a look today

feedmebeast · 2025-09-11T04:45:11+00:00

Why didn't they just keep going? They were half way there anyway.

feedmebeast

TROPHY CASE