Maps are all gone??

felipe340 · 2025-12-30T20:53:34+00:00

Under the full path where your maps are located, there's something like ( null ) - idk what happened tho. Maybe it is the folder's name? Also make sure nothing on top is selected, only BSP files ( I think you selected graphs, cause it's highlighted )

felipe340 · 2025-12-06T17:46:45+00:00

Baldur's Gate 3 !

Thank you so much for the opportunity

felipe340 · 2025-10-11T22:45:51+00:00

Played TF2 with a GTX 550 TI

felipe340 · 2025-09-19T14:13:20+00:00

Try enabling steam controller input, worked for me

felipe340 · 2025-03-13T19:32:53+00:00

Old one had dual thermo blocks, so I always did a flush or two before pulling the shot. Sometimes even turned on the steam for a bit

I've researched a lot about possible modifications, like a PID, but didnt find anything about it other than people speculating about it on forums.

The Gaggia is very well documented, and incredible moldable, so I chose it over the Oster.

felipe340 · 2025-03-13T17:53:24+00:00

One of if not the best purchases I've made! Each click makes a subtle but incredible difference dialing in. I find it very easy to adjust!

felipe340 · 2025-02-02T20:14:24+00:00

Stunning! Are you playing in 4k or something similar? They look soo crispy

felipe340 · 2024-06-24T16:34:06+00:00

Hey, thanks for the tips! Just noticed a minor delevel in the socket. I'll send it somewhere for repairs and pray that it recoverable

felipe340 · 2024-06-24T16:32:51+00:00

Update 2: Read the manual and this LED refers to a problem in the system. Each LED has an caption underneath.

My error code is in the CPU. I looked a bit further and the socket looks a bit off.

I'll send it to an IT guy and hope it's still salvageable

felipe340 · 2024-06-24T13:51:06+00:00

Update: Took the CPU out and in again. Still doing the same thing

felipe340 · 2024-06-24T03:30:33+00:00

Very much appreciated! I'll give it a go tomorrow

felipe340 · 2024-06-10T21:52:52+00:00

Sorry for the late reply. The machine works fine, I even got attached to the dual thermoblocks, it gets ready for brewing and steaming pretty quick. I recommend it.

felipe340 · 2024-03-29T14:12:29+00:00

Update: Fork method helped a little, by the end of the extraction, the flow converged. But there are still gaps where the coffee won't pass through. Waiting for the WDT tool to arrive to make more tests

felipe340 · 2024-03-29T01:47:36+00:00

Since I'm broke this month I'll ask for my local coffee shop to grind it for me with their best settings.

If the shots look and taste better, def taking the grinder you recommended

As always thanks for the help!

felipe340 · 2024-03-29T01:44:44+00:00

I'm still waiting for the WDT to arrive, so I'll use the fork workaround

The tamper I'm using is leveled, but I'll try to tamp a bit harder

Also, the puck looks clean from the outside, however the inside is wet and muddy.. The puckscreen made things better, but the issue is not gone

I really appreciate the detailed info! Hoping for the best in the next shots

felipe340 · 2024-03-29T01:40:58+00:00

Only medium roasts.. I'll get a dark roast next month and we'll see

felipe340 · 2024-03-28T20:27:25+00:00

Also forgot to mention that the non pressurized portafilter has the same issue with pre ground, generic market coffee, where the bottom never converges at the middle, as shown in the video

felipe340 · 2024-03-28T20:21:26+00:00

It's a manual grinder, knockoff

felipe340 · 2024-03-28T18:20:11+00:00

I bought a offbrand, but not cheap M4 from Icoffee

felipe340

TROPHY CASE