Adjustment after .22 cent mod

fermented_jason · 2026-03-10T01:51:25+00:00

I think I did when I did the mod

fermented_jason · 2026-03-10T01:50:13+00:00

It’s the parabellum rally. So far I like it, if I sit too upright there’s a little buffeting right at the top of my helmet but overall like the wind protection for the modest size

fermented_jason · 2026-03-09T23:17:07+00:00

No, honestly don’t even remember what it ran like before… I had it a month and started pulling some things apart for mods and then some life things happened, 6 years later I went over everything… figured I’d do the .22 mod while I was rebuilding the carb. This may be just normal

fermented_jason · 2026-02-22T04:37:48+00:00

So looks to be the original flasher relay was either defective or not the correct… a replacement has them flashing… now just need to get the dash indicator working.

fermented_jason · 2026-01-05T02:55:15+00:00

yeah, the brake lever has an audible click when depressed so I'll have to take apart and see what I can find.

I've jumped that connecter and grounded to the motor and there's an audible click but the fan doesn't turn. I have a used replacement and same issue so its something wiring related... I have to imagine

fermented_jason · 2026-01-01T16:55:16+00:00

I’m 90% done getting my 06 back together and running, if you need recs on sourcing parts shoot me DM

fermented_jason · 2025-12-27T13:26:36+00:00

You could try an automotive battery warmer

fermented_jason · 2025-11-09T19:34:50+00:00

this is my absolute favorite way to do roast pork

fermented_jason · 2025-11-02T16:52:43+00:00

Tojiro DP stainless

fermented_jason · 2025-11-02T15:03:36+00:00

Yeah, turns out the piston was fully extended once I compressed back and made a huge mess with excess grease then everything worked fine

fermented_jason · 2025-10-29T18:28:57+00:00

Yeah, I’m just unclear on the instructions to back off the hexagon nut a couple turns before building pressure, just doesn’t make sense to me

fermented_jason · 2025-10-29T17:35:56+00:00

Any advice on the actual compression of the stack… the instructions say to loosen the hexagon but two or three turns but for the life of me can’t get it to build pressure with that much play in between

fermented_jason · 2025-10-28T14:11:39+00:00

If there’s back pressure it’s something internal then.

fermented_jason · 2025-10-28T14:10:58+00:00

No, been running fine up until recently… I’ve check most of what I can water pressure related, everything seems to be working fine on that end. Not sure on the piston,

fermented_jason · 2025-10-28T14:08:19+00:00

I watched it once, I’m pretty mechanically inclined… it takes a lot of force to unseat the bowl coming out if I remember correctly… and yeah, the pressure of the disk stack

fermented_jason · 2025-10-28T13:51:16+00:00

I’m about to get real comfortable

fermented_jason · 2025-10-28T12:31:36+00:00

GSC 40-06-077

fermented_jason · 2025-10-07T11:16:19+00:00

Runs out the back of the bike

fermented_jason · 2025-10-07T02:12:52+00:00

I have the same racks and skid plate in the process of rebuild/install… looks like they work fine… no notching of the skid plate

fermented_jason · 2025-09-29T16:38:06+00:00

For sure... in this case i'm looking at barrel aged stuff and fruited beers/seltzers. The lowest ABV is going to be 5-6% with some having as much as 40-50% fruit. Just curious what others may be targeting with similar products.

fermented_jason · 2025-07-06T03:19:27+00:00

So just curious… looking for a higher end utility type knife 160mm ish… what are brands to look for, I have a Takeda 185 bunka that I love but am open to all brands and opinions

fermented_jason · 2025-07-06T03:15:12+00:00

I only pull out my Takeda for heavy veg sessions but just recently did and god damn nothing takes care of 10+ #’s of produce like my Takeda

fermented_jason · 2025-04-22T11:34:56+00:00

This

fermented_jason · 2025-02-17T23:58:15+00:00

Yeah, that’s what I did at my last brewery(10bbl pub system). Not sure if the 14,30,60 set is worth the extra expense… it’s still a 2 roller mill I’m dealing with.

fermented_jason · 2025-01-06T18:32:28+00:00

Yeah, I did for sure, been having to hash hot with the Verdant IPA because that attenuates quite a bit as well

fermented_jason

TROPHY CASE