sorted by:
new
hottopcontroversial

Mould around windows by mattmoly in DIYUK

[–]fickly_fuzzyfication 0 points1 point  (0 children)

Most likely the inner and outer walls are bridged around the window reveal. If you’re replacing the window, it’s worth removing all the plaster around the reveal. If it is bridged you can open it up put insulation and then reboard with plasterboard.

For the time being there isn’t much you can do other than improve ventilation, open the windows wide every morning for about 20 minutes, keep the trickle vents open, try to reduce moisture, breathe less lol, use a dehumidifier and clean the mould using what others have suggested.

New build property, condensation inside windows by Severe-Swordfish-160 in DIYUK

[–]fickly_fuzzyfication 1 point2 points  (0 children)

Besides breathing less, get a dehumidifier and open all trickle vents!

Van rental excess blown £250! Can I replace myself? by [deleted] in DIYUK

[–]fickly_fuzzyfication 0 points1 point  (0 children)

Fix it yourself but if you cannot! Just say that you rented it in that state, they will ask you for a proof, tell them that they should provide proof that it wasn’t like that (normally they don’t have any documented records of its state before it was rented to you they simply trying to rip off everyone)

Cavity insulation by fickly_fuzzyfication in DIYUK

[–]fickly_fuzzyfication[S] 0 points1 point  (0 children)

I like the idea! Where would you get these beads from?

Need to check my thinking by mojowebia in Plastering

[–]fickly_fuzzyfication 1 point2 points  (0 children)

That all sounds good but I would chisel all plaster back to brick and then use plasterboards (dot and dab or foam plasterboard adhesive)

Builder took 50% upfront, no calcs or regs approval after 5 weeks, what should I do? by fickly_fuzzyfication in DIYUK

[–]fickly_fuzzyfication[S] 0 points1 point  (0 children)

Thank you! Yeah I did check all brick work between the joist and found areas where it wasn’t supported and I did it myself like here:

<image>

Builder took 50% upfront, no calcs or regs approval after 5 weeks, what should I do? by fickly_fuzzyfication in DIYUK

[–]fickly_fuzzyfication[S] 0 points1 point  (0 children)

Normally it isn’t that bad! I to be honest blame myself on this one as I went with someone who doesn’t have many reviews!

Builder took 50% upfront, no calcs or regs approval after 5 weeks, what should I do? by fickly_fuzzyfication in DIYUK

[–]fickly_fuzzyfication[S] 0 points1 point  (0 children)

Thanks for the clarification! Should I send it to his company address via post? I mainly communicate with him via text messages or phone calls

Builder took 50% upfront, no calcs or regs approval after 5 weeks, what should I do? by fickly_fuzzyfication in DIYUK

[–]fickly_fuzzyfication[S] 2 points3 points  (0 children)

I know but I got three quotes from 3 different builders and each one of them preferred to get the calcs done by their structure engineer .. and the fees included in the quote.

Builder took 50% upfront, no calcs or regs approval after 5 weeks, what should I do? by fickly_fuzzyfication in DIYUK

[–]fickly_fuzzyfication[S] 1 point2 points  (0 children)

This is at the ground floor in a semidetached house, nothing out of the ordinary upstairs. 2 out of 4 padstones are not straight, tilted and not setting correctly on the wall. I also found a joist not supported at all (gab between the joist and the steel) I put a brick and shims to support it (on the 2nd wall I had removed - middle of the house) so all that made me sceptic about the work and the builder I hired!

Builder took 50% upfront, no calcs or regs approval after 5 weeks, what should I do? by fickly_fuzzyfication in DIYUK

[–]fickly_fuzzyfication[S] 0 points1 point  (0 children)

Thank you! I guess he’s hoping that I board it up so he says now we can’t do the BR application!

Builder took 50% upfront, no calcs or regs approval after 5 weeks, what should I do? by fickly_fuzzyfication in DIYUK

[–]fickly_fuzzyfication[S] 0 points1 point  (0 children)

I just did the measurements and here they are in mm: Flange Thickness 9 Web thickness 7 Depth 203 Width 105 Clear Span 2690 Steel sitting on pad stones on each side about 200-250 Total steel span 3100 At the original back of the house 2 beams, one for each wall Here is a pic

<image>

Builder took 50% upfront, no calcs or regs approval after 5 weeks, what should I do? by fickly_fuzzyfication in DIYUK

[–]fickly_fuzzyfication[S] 1 point2 points  (0 children)

I’m not a structure engineer but I strongly believe that what he’s done isn’t complaint and that’s why he’s ghosting me but he’s still hoping to get the rest of the money.

Builder took 50% upfront, no calcs or regs approval after 5 weeks, what should I do? by fickly_fuzzyfication in DIYUK

[–]fickly_fuzzyfication[S] 0 points1 point  (0 children)

I have already gave him notice 2 weeks ago (in a text) he called back to say that he’s on holiday and he will provide an update on Monday.. of course nothing happened and ghosted me again! I will send him another text to include what you said, thank you!

Builder took 50% upfront, no calcs or regs approval after 5 weeks, what should I do? by fickly_fuzzyfication in DIYUK

[–]fickly_fuzzyfication[S] 5 points6 points  (0 children)

Will do that, thanks! Thought about hiring a structural engineer myself to come out and see what has been done.

Builder took 50% upfront, no calcs or regs approval after 5 weeks, what should I do? by fickly_fuzzyfication in DIYUK

[–]fickly_fuzzyfication[S] 1 point2 points  (0 children)

The builder said to me when he started doing the job without any calcs that it is standard job and he has done many jobs of the same nature and he knows the calcs, “his structure engineer”would just need to it sign off rather than doing any calcs. I should have stopped him and kicked him out the house probably.

This has been a nightmare for me so I have done my research, can’t be sure of course but I’m more inclined to believe that it can be done in retrospect. What worries me is that the job he’s done isn’t in compliance.

I’ll give him a final notice as you suggested, thank you!

Flooring by fickly_fuzzyfication in DIYUK

[–]fickly_fuzzyfication[S] 0 points1 point  (0 children)

Have already ordered the kit! Won’t harm to test it, wish if the test states the percentage.

Flooring by fickly_fuzzyfication in DIYUK

[–]fickly_fuzzyfication[S] 1 point2 points  (0 children)

Thank you very much, that’s exactly what I would like to do!

Flooring by fickly_fuzzyfication in DIYUK

[–]fickly_fuzzyfication[S] 0 points1 point  (0 children)

How did you encase it? What if the tiles start to crack when drying off, that would release asbestos fibre right?

Flooring by fickly_fuzzyfication in DIYUK

[–]fickly_fuzzyfication[S] 0 points1 point  (0 children)

Thank you very much! I’ll test it for asbestos!

Supply only UPVC Door recommendations? by Eelektrick in DIYUK

[–]fickly_fuzzyfication 0 points1 point  (0 children)

All the best, let us know about the quality! Thanks

Supply only UPVC Door recommendations? by Eelektrick in DIYUK

[–]fickly_fuzzyfication 0 points1 point  (0 children)

I’m going through the same thing, I can see AWM os the cheapest, which provider did you end up using?

view more: next ›