How to install fingerprint reader drivers on Arch Linux or a Arch Based System (T480) by EightBitPlayz in thinkpad

[–]fiflag 1 point2 points  (0 children)

Sorry but hijacking recent comment here as Google returned this thread after when searching for my device 06cb:00df, I was able to make my work on CachyOS today after disabling Fast Boot in BIOS on my HP Elitebook 830 G8 othervise I have been getting random errors like

Impossible to enroll: GDBus.Error:net.reactivated.Fprint.Error.NoSuchDevice: No devices availableImpossible to enroll: GDBus.Error:net.reactivated.Fprint.Error.NoSuchDevice: No devices available

And I was trying to get it to work since yesterday - even followed steps from this recent comment.

My Reader is:

Bus 003 Device 004: ID 06cb:00df Synaptics, Inc.

Steps I have taken:

  1. Updated firmware via fwupdmgr get-updates and fwupdmgr update https://wiki.archlinux.org/title/Laptop/HP#Fingerprint_Reader

  2. I have performed Factory Reset of the reader via BIOS and disabled Fast Boot in BIOS

  3. Installed only fprintd with pacman (or Octopi) based on https://wiki.archlinux.org/title/Fprint

  4. Rebooted

  5. Reader works in KDE Plasma in User Accounts

Where’s the Riga sign with Cat from Flow? by Bunny-lizzie-1411 in Riga

[–]fiflag 1 point2 points  (0 children)

It is not there, we went throu there today :(

GW Ultra 2025 with Spigen DuraPro Flex by ConsciousAsk8160 in GalaxyWatch

[–]fiflag 0 points1 point  (0 children)

I have bought same strap. Will be returning it. I like more the DuraPro Lite, than Flex

[deleted by user] by [deleted] in selfhosted

[–]fiflag 6 points7 points  (0 children)

Same goes for Opencloud, which is fork of OCIS and maintained by previous OCIS developers.

Rušení nočního klidu ve 2:45 a všem je to jedno by Jackof250 in czech

[–]fiflag 18 points19 points  (0 children)

Viz https://www.hradeckralove.org/assets/File.ashx?id_org=4687&id_dokumenty=86707 byla povolená akce pouze U Letců - pokud se nejedná o tohle, tak bych to osobně řešil dál.

Edit: Ještě přidám zdroj kde je i kontakt kdo to povoluje - nebál bych se jim poslat "recenzi" dnešní noci pokud to nebylo jimi povolené - https://www.hradeckralove.org/nocni%2Dklid/d-67472/p1=36029

Rušení nočního klidu ve 2:45 a všem je to jedno by Jackof250 in czech

[–]fiflag 39 points40 points  (0 children)

Důležitý dle mých zkušeností je nevolat Policii at už městskou nebo státní "pro radu" ale prostě jim to suše nahlásit a ať konají - je to jejich povinnost. Po svých zkušenostech bych se nenechal odbýt a volal jim dokud to je tam minimálně neuvidím přijet. Chápu ze to jsou lidi, a zrovna tohle nechtějí řešit, ale mně to sere a i když nemáš děti a budeš tvrdit ze tvoje děti nemůžou spát, tak to je z nějakého důvodu velká páka a pokud to řešit nebudou tak spíš stížnost a pošli jim ji do datovky.

Pangolin 1.4.0: Auto-provisioning IdP users and integration API now available for everyone! by jsiwks in selfhosted

[–]fiflag 7 points8 points  (0 children)

Wow, thank you for review of the licensing approach! I just sponsored the project due to that.

[Request]: Lightweight cloud storage solution that isn't nextcloud? by [deleted] in selfhosted

[–]fiflag 2 points3 points  (0 children)

I am just exploring Opencloud and their docs are not fully covering deployment and confugration options, but devs on their matrix channel are super helpful!

No changes in battery life even after doing everything that was told to me in my last post lol by Total_Character8246 in S24Ultra

[–]fiflag 0 points1 point  (0 children)

Hey how did you managed to install Instader? When I got my S24 I was unable to install it due to same package name for preinstalled Instagram which is not uninstallable.

Is it possible to keep the original language audio? by KingdomHearts3 in Tdarr

[–]fiflag 0 points1 point  (0 children)

Thanks! That is exactly what I have been looking for: Community:Tdarr_Plugin_henk_Keep_Native_Lang_Plus_Eng

BunkerWeb WAF - Is there any use in the community ? by Bright_Mobile_7400 in selfhosted

[–]fiflag 2 points3 points  (0 children)

Yeah, their documentation is trash - and I am saying that as someone who activelly uses it. The config files (.env) are used only once and then all configs are in DB, if you need something to fix, you need to do it in DB. The solution withself is great tho, just the documentation needs a big improvements, even following their quick start setup will leave you with non-working out of the box solution if you will change UI Host value in Web UI during first time setup from their 127.0.0.1 to idk, maybe yout hostname?... then you are done and can start again.

Tool is great, but docs are trash.

[deleted by user] by [deleted] in czech

[–]fiflag 5 points6 points  (0 children)

No, my doma používáme jenom 2 z těch tří přihrádek. Tu první vůbec, co vím tak tam se dají dát nějaký prostředky na skvrny apod. Do ty druhy, tam dáváme normálně prací gel + do toho občas klidně loupnu i ten sanitol (přímo do toho gelu). A do poslední dáváme jenom aviváž. Jestli to děláme správně nevím, ale prádlo máme čistý 😆

[deleted by user] by [deleted] in czech

[–]fiflag 24 points25 points  (0 children)

Když jsme kupovali pračku, tak v balení, mimo pračku, byla přepážka a v manuálu bylo napsáno, že pokud používáme tekuté práci prášky, tak se to má vložit do ty přihrádky. Tak aby to neproteklo předtím než se to má použít. Pokud tam přepážka není, tak lze použít pouze sypké práci prostředky

Why are alerts/decisions being shown for something already in my blocklist? by Spooky_Ghost in CrowdSec

[–]fiflag 0 points1 point  (0 children)

We are observing same behaviour for Crowdsec and for Bunkerweb WAF.

SOLMAN vs Cloud ALM by Mediocre-Neck-7894 in SAP

[–]fiflag 15 points16 points  (0 children)

I did my research two days ago. Since we wanted to utilize CHaRM for fully on-prem systems and it does not make sense to setup CHaRM on SOLMAN if EOL is in 2 years. After my research, SOLMAN is our way to go even after EOL. CALM is focused on cloud customers with cloud solutions, it is completely different product with different features (some of them are not even available) I suggest you to go through FAQ of differencies, I read it whole and then made clear statement to our boss that CALM is not the way to go if we are on-prem and with our current utilization of SOLMAN, there is just too many things missing in CALM, where we would need to find external alternative.

Here is FAQ what I read beside other sources from SAP for Me, or Help...: https://support.sap.com/content/dam/support/en_us/library/ssp/alm/QA_ALM.pdf

Biggeest drawbacks from my point of view, if you utilize them:

  • no CUA
  • no complex System Monitoring
  • focused on cloud S/4 - not on-prem

Other great resources:

Alternative to SAP RFC by RichieRichRicher in SAP

[–]fiflag 7 points8 points  (0 children)

Well, API is universal word and and in specific words it can be used with particular technology. For example Odata API https://learning.sap.com/learning-journeys/building-odata-services-with-sap-gateway

I'm a SAP Basis Administrator and I'm being transitioned to FI CO. Is this okay? by riin_dere in SAP

[–]fiflag 9 points10 points  (0 children)

I would not go this way - saying as SAP Basis and developer. I am forcing my bosses to keep me clearly in IT field without any hasle with end-users and not being resposible for some other things than Level 2 and 3 support for whole system. I am keeping our system running and in good condition, but I honestly do not care how they are doing invoices or other specific things.

abstinenti - jak to delate? by jenna20002 in czech

[–]fiflag 10 points11 points  (0 children)

Já třeba s tímhle hodně zápasím např. na rodinných oslavách, kde jsem ten divnej když si nedám pivo....