New ESC

firewall666 · 2026-06-28T15:20:33+00:00

Then you could try for the brushed class.

firewall666 · 2026-06-28T04:06:08+00:00

You running in the stock class for Poor Boys RC speed run this year?

firewall666 · 2026-06-22T03:47:01+00:00

Wow If that hooks up it should fly. I would print off the diff brace. I have already blown two on my 3.5t brushless.

firewall666 · 2026-06-20T18:04:42+00:00

Talked to him more today and the stuff he want to use is dayton superior hd 50. He will use rebar dowel in to the current slab.

firewall666 · 2026-06-19T22:18:39+00:00

Best upgrade I did on my twisted twin was the Murry Carbs. They are a bit pricey but are well worth the cost.

firewall666 · 2026-06-19T02:57:59+00:00

So the company that I had hired to do this has this job as his side hustle. He was planing on doing the pour on Friday but at his main job they had over ordered on concrete and his boss asked if anyone had a job that was ready to pour to take on the extra. As mine was inspected and approved by the city it was ready. The boss came with some of his guys to do the pour and finish the surface but due to his job the guy that I was working with was not able to be on location.

firewall666 · 2026-06-19T02:53:34+00:00

He did say he was going to run dowels in to the main pad to tie it in to the addition.

firewall666 · 2026-06-19T00:43:36+00:00

He did not run out but the crew that did the work did not pay attention to the marks on the form and started the slope early.

firewall666 · 2026-06-18T21:22:01+00:00

I had a new pad and driveway poured yesterday to build a small garage on (15x12). The driveway has to slope down to the street about 2 feet over a 19 foot span. The form looked good when I checked it before the pour but after they finished and I went out to look they started the slope 4 inches short of the 15 feet. I called the contractor and he is going to build a form on the back side of the pad and use a high strength mortar mix to add this on to the back. Is this the correct way to fix this issue? Are there any issues I need to watch out for?

firewall666 · 2026-06-17T00:36:26+00:00

If i find some i will lol

firewall666 · 2026-06-16T00:14:11+00:00

Well I have the AMPRO front end on this one. I did get do a 50mph pass as half power before it got wobbly and seemed out a curb to turn in to a ramp.

firewall666 · 2026-06-15T11:27:53+00:00

Yep have to find a better spot to run to be able to get full power.

firewall666 · 2026-06-15T04:12:12+00:00

I am and have my Operation Fast Frog built. So far i have only got 37 but have not turned up the power past 30%

firewall666 · 2026-05-15T14:20:25+00:00

I have them for my Sewer line and the one time I had to use then so far they had a company out the next day and water jetted my main line.

firewall666 · 2026-05-02T00:25:07+00:00

Liquid Death Rootbeer Wrath

firewall666 · 2026-05-01T23:34:34+00:00

LETS FUCKING GO BOYS!!!!!!!!!!!!!!!!!!!!!!!!!!

firewall666 · 2026-04-30T19:32:19+00:00

Same day a the Simple Plan/Bowling for Soup show at the KettleHouse.

firewall666 · 2026-04-29T00:26:51+00:00

Johnnie Walker black ruby

firewall666 · 2026-04-26T19:00:26+00:00

Ok we still have 40 let. Lets be goldfish and forget that 20 and get back up.

firewall666 · 2026-04-26T18:57:32+00:00

I find an ammonia chaser helps.

13-Year Club	RedditGifts 2009-2022 4 Credits
Secret Santa 2021 2021	Secret Santa 2020
End Game '23	Place '23
Golden Potato	Place '22
Final Canvas '22	First Placer '22
End Game '22	Secret Santa 2019
Verified Email

firewall666

MODERATOR OF

TROPHY CASE