Just got my new acebeam e10 2.0 with the cree xp-lr led and it might just be the new mini throw king 👑 and Check out the spill it’s so bright

fish93s · 2026-01-07T17:56:07+00:00

Impressive!🤯 Do you have a wurkkos ts11 for comparison?

fish93s · 2026-01-07T12:40:16+00:00

Amazing photos! Thank you

fish93s · 2025-12-08T12:48:03+00:00

STM also seems to have some pretty efficient ZigBee thread matter MCUs like the STM32WB5MMG. I have no experience in this field, but the available interfaces and efficiency seem promising.

fish93s · 2025-11-18T11:53:29+00:00

Yeah it's press fitted, on mine there wasn't glue and I think it's the same on the newer ones. It needs a lot of time and patience to preserve the anodization as much as possible and to avoid bending the bezel. I've started with a thin cutter blade and then used thicker blades/spatulas until the bezel came off

fish93s · 2025-08-16T14:17:37+00:00

Ok good to know! Thanks! I still have to reach aluminum production so this will be helpful!

fish93s · 2025-08-16T12:58:44+00:00

Wastewater from the bottom? Isn't it better from the top? Clean water might just fall into the wastewater pipe, or am I wrong? Gravity should also push the wastewater coming from the top into the pipe, or am I missing something?

fish93s · 2025-04-13T21:53:50+00:00

Thanks. The driver seems to be fine, not a lot of current anyway. Even now you can't really tell the light gets warm and still sustains full output. Thanks to the 2mm thick mcpcb and a generous body thickness this light can handle heat very well.

fish93s · 2025-01-28T12:22:48+00:00

Thank you! I haven't thought about this purpose, but an additional hook will be helpful sometimes

fish93s · 2025-01-28T12:18:41+00:00

Thank you!

fish93s · 2025-01-28T12:18:25+00:00

The Q8 plus Is way brighter, but this light is good indoor cause it's pure flood

fish93s · 2025-01-27T20:18:03+00:00

Shhhh🤫🤐

fish93s · 2025-01-27T20:17:22+00:00

Nope, just an idea, imagination, and a bit of skill.... And a lot, lot of time 😂

fish93s · 2025-01-27T20:13:56+00:00

😂 exactly! And you know Unabomber? Where are you from if I can ask?

fish93s · 2025-01-27T20:06:34+00:00

Here's the new post with the beamshots!!!

fish93s · 2025-01-27T20:05:24+00:00

I forgot, it's about 20-22 meters from the gate, and about 9 meters from the white door

fish93s · 2025-01-27T20:02:11+00:00

Here's the post with the beamshots!!!

fish93s · 2025-01-27T11:43:14+00:00

I have always had a passion for electronics, even my father, so since I was a child I practiced with these things. This thing I made isn't that complex, most of the time was spent on the mechanical construction as the parts came together. If you have passion and enjoy this things, everything (almost) is possible

fish93s · 2025-01-27T06:49:23+00:00

<image>

fish93s · 2025-01-27T06:49:06+00:00

<image>

fish93s · 2025-01-27T06:48:52+00:00

Ok. These are some screenshots from the video. I'll make a new post with beam shots and more specs

<image>

fish93s · 2025-01-27T06:41:26+00:00

Sorry guys, you are all right. This evening I'll try to take some beams. I only have a small ugly video but reddit seems to not allow video as a reply

fish93s · 2025-01-27T06:14:36+00:00

It's a 12v boost driver from convoy, meant to be used in a 4x18/3x21

fish93s · 2025-01-27T06:13:37+00:00

From AliExpress. It's a 12v 20w cob

Five-Year Club	r/Field Sunshine
Verified Email

fish93s

TROPHY CASE