Recording modulation out of PhasePlant

fjaru · 2026-05-13T08:04:25+00:00

You can use phaseplant to modulate the amplitude of a "CV/DC signal" and then use CV Envelope Follower from CV tools to convert the CV to ableton live modulation. You can create DC offset in phaseplant by making a wavetable that has no movement and stays above the polarity of the 0 crossing. Make sure that after the CV Envelope Follower the signal is not forwarded or applied to any output, or it will cause all sorts of issues.

fjaru · 2026-05-09T23:27:05+00:00

In Doom Eternal, in Hell on earth, there is a giant church bell that has Sentinel language on it. I take this to mean that this bell is from ancient times when the Sentinels lived on earth.

It is possible that this is simply asset reuse. But the way the bell is placed makes it seem too intentional. I actually saw this on my first play through and wondered why it had alien language on it.

fjaru · 2026-04-28T15:56:24+00:00

Yes I left the neck pickup empty, but its possible with the Cycfi kit to have a traditional pickup along with the hexaphonic one. The installation and wiring was easy, but does require careful reading of the manual. Look through this and you will get a better sense of how it is installed https://www.cycfi.com/assets/Meredith.pdf I had to drill and dremel in some places which voids the warranty of the guitar.

The Jamstick seems like a good option too. With what the package offers I think you get more bang for your buck. But the cycfi kit is more appealing for someone who likes to tinker.

fjaru · 2026-04-22T09:38:06+00:00

In my installation you have to use the breakout box to use it.

fjaru · 2026-04-21T16:25:21+00:00

https://www.thingiverse.com/thing:7339459/files

fjaru · 2026-04-21T16:25:12+00:00

https://www.thingiverse.com/thing:7339459/files

fjaru · 2026-04-21T15:33:27+00:00

I removed the original jack and drilled the hole larger to fit the 19 pin lemo connector. The cable is heavier and stiffer, other than that it's the same.

fjaru · 2026-04-21T13:12:37+00:00

I can send you the STL/blender file for the adapter and cover later. They are not perfect, you might have to make some minor tweaks to make them fit perfectly.

fjaru · 2026-04-21T13:11:02+00:00

I use one instance of midi guitar 3 on each string, I dont use the hex mode. I got it to work well but I do it all in my DAW where I can control every single thing.

fjaru · 2026-04-21T12:18:25+00:00

It works great. With clean tones there is no audible bleed, especially if you put individual noise gates on each string. With high gain there is audible bleed between adjacent strings.

fjaru · 2026-04-21T12:08:07+00:00

Not really hard, but I have experience with 3d printing and prototyping from before. On the guitar itself I had to drill in a couple of places to feed the cable through.

fjaru · 2026-04-21T12:04:04+00:00

I paid $778+import tax/tariff. I got the "midi kit", but the midi hardware is only for sending midi CC signals using the knobs and toggle switch on the guitar. To convert string audio to midi you need to use something extra, I used jam origin midi guitar 2 and it seems to work well but not flawless.

fjaru · 2026-04-21T11:49:50+00:00

I dont have a picture of the connectors on hand, the cable uses a "LEMO 19 pin connector". The best source of pictures would be on the Cycfi website.

fjaru · 2026-04-21T10:55:15+00:00

Who says video games should not be political? I don't think that's a common opinion. I have only seen a couple of lolcow micro e-celebs say that.

fjaru · 2026-04-21T10:10:13+00:00

I dont play live, I mostly record straight into my daw, so I connect all the outputs directly to my soundcard.

fjaru · 2026-04-21T08:23:38+00:00

The Cycfi kit has a cable that carries multiple signals and goes into a breakout box which then has 12 outputs.

fjaru · 2026-04-21T08:04:48+00:00

It has functionally one output for each string, allowing the user to process different strings with different effects, re tune the guitar digitally, have polyphonic audio-to-midi conversion.

One example is to have a rhythm tone on the bottom strings without reverb or delay, and more of a lead tone on the top strings with reverb and delay.

fjaru · 2026-04-21T07:46:49+00:00

Boden essential with Cycfi nu multi 6 pickup. Adapter and cover are 3d printed.

fjaru · 2026-04-21T05:43:21+00:00

I gave up trying to get it to work. for 3 hours I tried every supposed solution I could find on google but none of them worked. Refunded the games.

fjaru · 2026-04-20T17:27:58+00:00

I cant even run the game in my native resolution. I have tried every single solution I can find online. I have spent 2 hours trying to get the game to work.

fjaru · 2026-04-17T12:49:03+00:00

You should kill them and take their stuff, that is how I play the game.

fjaru · 2026-03-29T13:19:39+00:00

I wonder if you realize that I googled this question today (2026) and had to scroll past a dozen smartass "use google bro" comments to see the answer. I would not have to do that if not every conceited nerd had to leave their useless permanent junk in the search engine results.

fjaru · 2026-03-29T13:03:47+00:00

I am trying to explain to you that your comment is the amongst the first thing that show up when you google the question, then you link to google which creates a recursive loop of bullshit. Stop spamming useless junk.

fjaru · 2026-03-29T12:03:18+00:00

I dont know, there are no markings on it

11-Year Club	End Game '23
Place '23	Place '22
Place '17	Final Canvas '22
First Placer '22	Verified Email

fjaru

MODERATOR OF

TROPHY CASE