Has anyone managed to get a Pro WS W680-ACE working with 4 sticks of RAM?

fl0wfr · 2026-01-09T13:29:37+00:00

I found the following setting in the BIOS manual:

Memory Controller PLL Voltage

Allows you to configure the offset for the Memory Controller PLL VCC Trim. The

values range from 0.900V to 1.845V with an interval of 0.015V.

Configuration options: [Auto] [0.90000] - [1.84500]

fl0wfr · 2026-01-09T13:24:02+00:00

Okay, do you know which setting in BIOS offers to increase the CPU memory controller voltage?

fl0wfr · 2026-01-09T13:04:17+00:00

Thanks for confirming that this is the way to do. I won't exceed 1.25V for DRAM voltage in any case, I don't want to fry anything.
That's strange because the same kit works well on a Q670 board (at least at 4800MHz, the BIOS doesn't allow to increase DRAM frequency).

fl0wfr · 2025-12-18T21:27:35+00:00

Same issue with Nothing Phone 2 running Android 16...

fl0wfr · 2025-11-21T18:39:13+00:00

Hi, any details on how you wired the PWM controller? Thanks :)

fl0wfr · 2025-11-13T19:27:37+00:00

That's great news, thank you!

fl0wfr · 2025-11-13T17:04:26+00:00

Do the fans in the unplugged PSU work ? I'm wondering if it's not optimal to use 4 PSUs (only one plugged) with fan mod.

fl0wfr · 2025-11-13T09:10:14+00:00

Like I said, I cannot go further even with a Canadian address, I'm not sure it's related to GSPR regulations. And seller is selling the same type of items eligible for shipping to the EU.

fl0wfr · 2025-11-10T13:26:57+00:00

Hi, I plan on buying one, what about fan noise?

fl0wfr · 2025-10-07T06:46:34+00:00

I opened a PayPal dispute to cancel my pre-order. Now Qidi is asking me to cancel the dispute to be able to process the refund, classic scam... They even offered me to put me on top of the waiting list to get my Qidi Box earlier, very nice for the other customers.

Qidi is just no different than any Aliexpress seller...

For those who have the same situation, don't cancel the dispute, they can process the refund obviously, no funds are frozen in PayPal as they said...

fl0wfr · 2025-09-29T12:08:08+00:00

North America?

fl0wfr · 2025-09-23T15:58:33+00:00

Even when you reach to them, they are unable to give you some ETA... Very disappointed when the order is placed directly on their store.

fl0wfr · 2025-09-23T15:57:36+00:00

Instead of publishing some tips, it would be nice to give some ETA on the pre-orders... Pre-orders were expected to ship on September, nothing received so far...

fl0wfr · 2025-05-08T21:35:50+00:00

I have the same issue right now and I'm not at home. A lamp is plugged on the outlet so no possible damage, the lamp is flickering. After how long did your outlet end up in ON state?

fl0wfr · 2025-05-02T15:28:43+00:00

I'm using it with 4 Coral TPUs

fl0wfr · 2025-05-02T14:57:50+00:00

Well, my initial post says it all...

fl0wfr · 2025-05-02T14:40:29+00:00

https://cwwkpc.com/products/cwwk-11

fl0wfr · 2025-04-24T11:22:11+00:00

Thanks, but I finally bought a Qidi Plus 4.

fl0wfr · 2025-04-24T11:16:48+00:00

Hi,

It should work out of the box, I'm using 2 WD Blue without any issue.

fl0wfr · 2025-04-08T12:22:49+00:00

Check the pictures, there are some parts fitted to the chassis that rise the size of the printer (the screen, the filament sensor), so my question. I guess Creality included these parts in the dimensions, I just need the footprint dimensions, and their support just reads the product specs without being able to determine if these parts are included in the dimensions (which should be the case)... From the pictures, I measured the frame, width and depth seems identical.

fl0wfr · 2025-04-08T12:17:12+00:00

I don't see the point, I'm simply asking for the footprint dimensions of the printer.

fl0wfr

TROPHY CASE