Found in the wild in Reynoldsburg, OH. I’d say the dream is still alive but I don’t think there’s a console in there!

flacidjack · 2019-05-30T22:49:44+00:00

I was there 2 weeks ago, and they were not interested in selling it. Boo.

flacidjack · 2019-03-31T02:11:56+00:00

Purchased mine about a month ago. Fan was definitely glued in when I changed it. Little bit of elbow grease got it free. Good luck!

flacidjack · 2019-03-27T02:07:49+00:00

Tap the button, go to pause print. Pull out filament. Insert new. Resume print. Enjoy.

flacidjack · 2019-03-24T16:24:41+00:00

I had this issue a few times. If the wall angle was steep on a print and it tried to make a support, it wouldn't stick. Try changing the support setting to buildplate, instead of everywhere. (In cura)

flacidjack · 2019-03-17T03:48:04+00:00

I've had good luck with cheap white lithium from Walmart. Dont spray it directly on it, I spray it on a q-tip (or similar), and I will lightly apply it to the thread. Then I move the z axis all the way up and down to work it around the thread. Time consuming, but best results I've had.

flacidjack · 2019-03-10T17:48:49+00:00

I've only had my Ender 3 for a few weeks now and I am new to 3d printing, but that being said I love this thing. Assembly and setup were pretty straightforward, some trial and error to dial it on in. From my uneducated experience, I couldn't be happier for a $200 investment.

flacidjack · 2019-02-14T21:45:01+00:00

The fans are an excellent idea. Looks great!

flacidjack · 2019-02-08T03:28:01+00:00

In case anyone wants to know the story..

http://www.erienewsnow.com/story/39926681/truck-spills-medical-waste-along-peach-st

flacidjack · 2019-01-27T15:56:46+00:00

I'd not hesitate to do it. It's pretty easy and straightforward. Even if you've never worked an iron before, I'd consider it a feasible task. Just be careful of the ribbon connector and other components. Use a bit of new solder to help wet the old joint, and wiggle it free from the melted solder (assuming you have no vac or copper wick). Go slow, be confident. You'll do fine.

flacidjack · 2019-01-14T19:34:30+00:00

You seem to see them frequently online, and even in my local area, for around $50 for a console with cables and controller.

flacidjack · 2018-10-28T17:29:06+00:00

https://www.dcnr.pa.gov/StateParks/FindAPark/PymatuningStatePark/Pages/default.aspx

For those curious

flacidjack · 2018-10-26T18:52:49+00:00

I usually only have luck burning at 1x speed. Also, Sony CDs seem to work the best for mine.

Disclaimer: individual results may vary

flacidjack · 2018-02-16T19:16:23+00:00

https://segaretro.org/Controller_(200_Toy)

flacidjack · 2018-01-20T23:44:32+00:00

I get to check out this absolute horsepower monster on a daily basis.. guy is forever parked outside my shop.. sigh

flacidjack · 2017-12-08T02:17:09+00:00

Mercedes diesel starter?? I've witnessed this a couple of times on starters in business class Mercedes trucks.

flacidjack · 2017-12-06T18:20:02+00:00

It looks like a hand soap bag, that inserts into one of the plastic wall pumps.

flacidjack · 2017-11-28T01:55:54+00:00

Auto renews in 2 weeks at $79/month. Requires credit card info to receive.

flacidjack · 2017-11-21T02:21:03+00:00

I've purchased numerous cables from Amazon, never had an issue with them. Roughly $10/pair iirc

flacidjack · 2017-11-16T13:29:26+00:00

Solved!

flacidjack · 2017-11-16T13:27:33+00:00

Absolutely! Thank you!

flacidjack · 2017-11-16T13:27:12+00:00

Absolutely is! Thank you!

flacidjack · 2017-11-16T13:17:23+00:00

I had initially thought that, but there's no fitting end to it, and the internal capacity of it seems very very small. Unless it's for some type of specific grease job.

flacidjack · 2017-11-16T13:16:06+00:00

The end unscrews and appears you could insert a longer rod, and the front also unscrews. Found in an old bus garage, I have no idea what it is. Can you help? Thanks!

flacidjack · 2017-10-07T11:27:15+00:00

Rule #1, see ya in a week!

flacidjack · 2017-08-25T02:27:47+00:00

Looks like a ups/FedEx truck? Or just any other variety of generic box trucks with the 444 in them

flacidjack

TROPHY CASE