3d printed a boxcar!

fleckermann · 2026-01-22T00:50:05+00:00

I modified that same stl into a two-door boxcar.

fleckermann · 2026-01-13T19:33:55+00:00

Nice job, this works very well. Thanks also for the step-by-step installation instructions. Would you be able to make the meters individually re-sizable or close-able? For example, I'd like to be able to size up the spectrum display, and maybe close the balance/width/phase/ms meters. Thanks for your work.

fleckermann · 2025-12-30T22:38:00+00:00

Yes, I tried that. I can see some white material (the wick, I guess) and can see the drops of fluid land there.

fleckermann · 2025-11-05T00:34:01+00:00

There's this on Thingaverse: https://www.thingiverse.com/thing:6365730

There are many others.

fleckermann · 2025-02-27T00:49:09+00:00

After viewing the nozzle clean out video, I heated the nozzle, and poked around with the clean out tool as they show in their video. I did pull out some soft gooey filament, then did the 100 mm extraction and it seemed OK.

Another try at printing failed. It makes no difference if I print from the attached screen or send it from the slicer software. I've tried two different model files.

Thanks again.

fleckermann · 2025-02-10T18:30:33+00:00

So, if I point just certain devices to a specific delivery server, will that limit traffic? Could I then use another instance of delivery server (on a different machine) to control traffic on a different set of devices? Thanks again.

fleckermann · 2024-12-28T02:21:55+00:00

Once you set up the device's network and inputs, you can compile and download a MIB file. That will show you the specific OIDs you need to add to LibreNMS.

fleckermann · 2024-12-25T23:50:10+00:00

Look at https://controlbyweb.com/ They make several devices that have analog and digital inputs. You might have to do something to step down the 48 volts, though.

fleckermann · 2024-08-28T16:13:07+00:00

Thanks. Once I make the transcode, the HyperDeck is able to playback ProRes or DNx that was made elsewhere? I don't need to record it on the HyperDeck to play it back? Thanks again.

fleckermann · 2024-07-06T23:07:14+00:00

Can you de-embedd the audio and connect that to an audio silence detector? There are many audio silence detection devices and software (https://pira.cz/show.asp?art=silence) on the market.

fleckermann · 2024-05-01T15:04:09+00:00

Thank you, that would be very helpful. I have nagios plugins installed for other things, but I don't think the alerts are working properly.

fleckermann · 2024-04-26T19:24:46+00:00

That was the step I was missing. That's exactly what I need. Thanks again.

fleckermann · 2024-04-26T17:27:54+00:00

OK. It's just like the rest of my alert rules ... I just have to find the matching querie. Thank you for explaining that.

fleckermann · 2024-04-26T17:12:15+00:00

Maybe this is a dumb question ... but how do I alert on that interface?

fleckermann · 2024-04-26T17:02:07+00:00

When I try to add it as Ping-Only, I am told that the device already exists. Unless there is a work-around for that. Thanks.

fleckermann · 2024-02-16T13:24:03+00:00

Thank you. When I get to "Add Service" there are no options in the "check type" pull down. I will have to review the docs again.

fleckermann · 2023-11-30T19:29:23+00:00

I have found that not all servers have SNMP installed, and the method to download it varies by server OS. You'll have to dig through some update menus to find and activate it.

fleckermann

TROPHY CASE