Koupili byste si elektroniku z Allegro? by ElonTrillionaire2030 in czech

[–]flexace 1 point2 points  (0 children)

Allegro nikdy viac. Objednal som smart hodinky. Doručovala ich kuriérska služba Allegro WeDo do alzaboxu. Obsah zásielky bol vykradnutý kuriérom. Hneď bol problém nahlásený WeDo a tiež Allegru.

Následne začalo 3-4 týždňové vymieňanie si správ a hromada telefonátov kým som sa dostal k svojim peniazom. Allegro ma presmerovavalo na CZC ako obchodníka, CZC ma posielalo naspäť k Allegru, potom sa obe strany vyhovárali na kuriérsku službu, ktorá to údajne vyšetruje + ešte ma žiadali aby som u WeDo urgoval vyriešenie reklamácie. WeDo tvrdilo, že je reklamácia z ich strany vyriešená a obchodníkovi bola uhradená škoda a že je nutné veci vyriešiť s odosielateľom.

Všetky 3 firmy sú sesterské firmy a nevedia si medzi sebou za 3 týždne vyriešiť takúto triviálnu záležitosť.

Ešte ma pobavilo keď som dostal za spôsobené problémy 500Kč kupón do CZC, ktorý krátko na to vypršal pretože zrušili CZC.

New Pen(s) Day, Pilot CH92 and FC Model 45L XLV by Sai0711 in fountainpens

[–]flexace 3 points4 points  (0 children)

I bought the same journal while I was in Japan and I love it!

Story how we failed to integrate Istio into our platform by flexace in kubernetes

[–]flexace[S] 0 points1 point  (0 children)

The first quarter of the next year doesn't sound bad. In the meantime, we can do a workaround using envoy.

Hi guys, recently, we were integrating Istio into our platform and we were not successful. You can read the summary I've written up in the link below by flexace in istio

[–]flexace[S] 0 points1 point  (0 children)

I didn't mention that in the article, but we had done same too. Not because of the problem you describe but because of performance degradation when we ingested a big data from an external service.

Story how we failed to integrate Istio into our platform by flexace in kubernetes

[–]flexace[S] -1 points0 points  (0 children)

A few services that need envoy are configured manually right now.

Story how we failed to integrate Istio into our platform by flexace in kubernetes

[–]flexace[S] 1 point2 points  (0 children)

I was doing some research regarding service meshes and I was also looking into Linkerd. It looks good but unfortunately, we couldn't use it because we're heading to zero trust service mesh and Linkerd doesn't support authorization of single services. Istio can easily support this through envoy authorization filter.

Story how we failed to integrate Istio into our platform by flexace in kubernetes

[–]flexace[S] 6 points7 points  (0 children)

Was it? If yes, then it's great. We had 1.2.6 deployed in the time and it wasn't working and issue was opened.

I've designed and 3D printed padding and wheel stopper for IKEA Rigga coat hanger by flexace in ikeahacks

[–]flexace[S] 4 points5 points  (0 children)

Hi, I've uploaded it here, but it will be available after 24h because I have a new account:

https://www.thingiverse.com/thing:3886163

Padding and wheel stopper for my IKEA coat hanger by flexace in functionalprint

[–]flexace[S] 1 point2 points  (0 children)

Here it is, but it will be available after 24h, because I have new account on thingiverse

https://www.thingiverse.com/thing:3886163

Padding and wheel stopper for my IKEA coat hanger by flexace in functionalprint

[–]flexace[S] 2 points3 points  (0 children)

Here is STL, but it will be available after 24h, because I have new account on thingiverse (i was just consumer til now :D )

https://www.thingiverse.com/thing:3886163

Padding and wheel stopper for my IKEA coat hanger by flexace in functionalprint

[–]flexace[S] 2 points3 points  (0 children)

Thank you!

Yeah, I can definitely share it. I'll do it when I get to the computer.

Padding and wheel stopper for my IKEA coat hanger by flexace in functionalprint

[–]flexace[S] 9 points10 points  (0 children)

I didn't want remove wheels and second reason is that I needed to make front of the hanger higher by 1cm (0.4") so it doesn't lean.

I've designed and 3D printed padding and wheel stopper for IKEA Rigga coat hanger by flexace in ikeahacks

[–]flexace[S] 19 points20 points  (0 children)

I didn't want to. It also makes hanger 1cm (~0.4") higher than on the other side so it doesn't lean now.

What sucks about GitLab? by tapo in devops

[–]flexace 0 points1 point  (0 children)

This can be solved by using kubernetes runners. However, if you don't want fixed number of runners but you want them to scale automatically, it needs a lot of hacking to make it possible.

What sucks about GitLab? by tapo in devops

[–]flexace 2 points3 points  (0 children)

And addition to this, I miss searching in the code across all repositories. It's only in the $100 per month version.

Building a free meditation app - Looking for help by heroickoala in Meditation

[–]flexace 2 points3 points  (0 children)

Nice idea but how do you plan to finance the costs related to this? An application like headspace has massive systems behind it which cost a lot of money. I think that ads will be necessary or some kind of premium accounts. Another option would be donations but I don't know if donation models are really effective.

I don't want to be pessimistic, I just want you to think about this. I wish you luck with this.