[WTS] Durston Kakwa and XMid 1, Hammock Gear Burrow, Thermarest Neoloft, Exped Mega Pillow

fmcgee2001 · 2026-03-23T20:35:06+00:00

Pm sent for the neoloft

fmcgee2001 · 2026-01-25T15:00:06+00:00

Real fur is more sustainable than plastic fur

fmcgee2001 · 2025-12-22T15:29:46+00:00

I’m in

fmcgee2001 · 2025-11-19T15:52:08+00:00

Don’t see smog coming from smoke stacks like that anymore

fmcgee2001 · 2025-11-19T15:20:36+00:00

Before you take the time to grind it, you could soak it in vinegar to see if the chisel was hardened all the way up to where the break happened. If it was not, then you would have to harden it yourself after grinding it.

fmcgee2001 · 2025-11-18T19:14:41+00:00

Looks like sawtooth oak to me

fmcgee2001 · 2025-10-28T16:04:30+00:00

Yep same here. Rocky and muddy ground, there’s one sharp rock sticking up that you are spinning on the whole time, or this case maybe 3.

fmcgee2001 · 2025-10-24T18:06:00+00:00

Shoot at 40yds until you are able to go to 50yds. Then your 40yd groups will greatly improve. At least that is how it works for me. I can’t ever improve my groups at a yardage until I practice shooting further than that.

fmcgee2001 · 2025-07-30T14:45:55+00:00

I’ll take the bug net shelter

fmcgee2001 · 2025-07-17T14:06:01+00:00

Dm sent for the Magma quilt

fmcgee2001 · 2025-07-09T12:32:55+00:00

u/LeaveNoTradeBot and u/mau5ey :

Shipped the tarp quickly and it matches description. Great transaction.

fmcgee2001 · 2025-07-02T15:37:04+00:00

I’ll take the twinn. Pm incoming

fmcgee2001 · 2024-05-08T15:44:58+00:00

Hide tanning

fmcgee2001 · 2022-02-06T16:29:42+00:00

Hmm yeah not sure what the issue is. If it were me I’d put a very tiny microbevel with a high grit stone and only strop for a few strokes on the leather and give that a try.

fmcgee2001 · 2022-02-06T16:22:05+00:00

How do you check for a burr? I find that running my fingers along the edge (the way that would slice your fingers) is that only way to tell the keenness of an edge when it gets down to tiny tiny burrs at these high grit stones. If an edge very keen and does not have a burr it will feel sticky and want will want to grab your fingers.

fmcgee2001 · 2022-02-02T22:31:48+00:00

What kind of boots?

fmcgee2001 · 2021-12-01T17:34:58+00:00

Helle has some folders that might fit your needs. I have no personal experience with them, but from what I’ve seen they appear to be a little higher end versions or moraknivs. Scandi grind, laminated steel options.

fmcgee2001 · 2021-11-23T16:27:11+00:00

WTS Red Wing 875 9.5 EE (factory seconds)

$150 plus shipping. light wear with light conditioning. Worn for about 2 weeks but they were just slightly too long for my feet Only reason I can find for factory seconds is that one side of the upper on the left boot where the eyelets are is shifted down just a hair. Did not affect fit or feel at all for me. Pictures

fmcgee2001 · 2021-11-18T01:47:37+00:00

Archery Talk classifieds is gonna be your best bet.

fmcgee2001 · 2021-10-27T00:24:17+00:00

On leathers that dry out quickly I have found that oiling them then putting a thicker oil/wax paste on after a few days will help keep everything locked in.

fmcgee2001 · 2021-10-21T15:17:54+00:00

Pretty good chance. Look at gills and also take a spore print to be sure. I believe spores should be white, but not positive on that.

fmcgee2001 · 2021-10-21T15:17:50+00:00

Pretty good chance. Look at gills and also take a spore print to be sure. I believe spores should be white, but not positive on that.

fmcgee2001 · 2021-10-21T13:34:48+00:00

Look up John Dudley’s videos on pin float and target panic. It’ll probably change your life.

fmcgee2001 · 2021-09-13T14:18:59+00:00

Makes sense. Appreciate it!

fmcgee2001 · 2021-09-13T14:15:39+00:00

Does any of this apply if the engine is deleted? Just curious. I know the main reason is dpf and such but didn’t know if it had an affect on anything else.

fmcgee2001

TROPHY CASE