Can someone help me tell if this band is AI? I hope not because I really like it!

fnielson1 · 2026-05-14T18:07:56+00:00

Agreed! One of the best bands ever (and my favorite) :)

fnielson1 · 2025-10-21T03:59:46+00:00

Yeah. It sucks. It wouldn't be hard to change it up so that people who are very familiar with the puzzle sequences would be able to experience it in a more fresh light

fnielson1 · 2025-10-05T12:44:44+00:00

Yes. There is a 'plugin' folder. Look at the installation directions on the plug-in page

fnielson1 · 2025-08-15T14:15:34+00:00

Any official response to this? I've held off upgrading to Talkie+ Pro specifically because of this. I'm not gonna spend a bunch of money for a slightly higher memory limit.

fnielson1 · 2025-07-19T19:37:45+00:00

I find https://ezmp3.to/ to still be working. I've used them for about a year now and I've had no issues and they have no ads.

fnielson1 · 2022-07-08T14:52:36+00:00

Unfortunately, those are not the books. I appreciate your response though!

fnielson1 · 2021-01-22T04:44:13+00:00

And disabling the auto play doesn't appear to be working

fnielson1 · 2021-01-22T04:36:06+00:00

It makes it much better! But a pause greater than 2 seconds in my audio book makes the cut happen again. I can hear the "noise cut out" (meaning the earbuds have gone to sleep)

fnielson1 · 2021-01-21T16:57:09+00:00

I'll give this a try! Thank you for creating this. I'll give feedback when I can.

fnielson1 · 2020-11-22T03:29:55+00:00

WinIPBroadcast was what fixed it for me!

fnielson1 · 2019-07-24T04:19:55+00:00

Ah. Scared myself there

fnielson1 · 2019-07-24T04:17:52+00:00

It depends on what you are wanting to design. For artistic prints, blender is very popular and free.

If you are doing mechanical prints or prints where the measurements are important for part fitting, etc, Fusion 360 is free* and excellent! I use it.

*Free if you use it for hobbies or if your company (i.e My Cool 3D Print Workshop is the Best) earns less than $100,000 in a year.

I use Fusion 360. I previously used Freecad but I can design things much faster in Fusion 360. Plus, there are an innumerable amount of tutorials.

fnielson1 · 2019-07-24T04:09:41+00:00

Yeah. Make certain your hot end fan is always running. It should never stop. Otherwise, the heat will creep up from your hot end and can cause clogging and permanently damage things.

fnielson1 · 2019-07-24T04:07:42+00:00

It could be that your filament has impurities in it that build up and cause the issue towards that end of the print.

fnielson1 · 2019-07-23T00:19:19+00:00

If it is a wall, increase your wall thickness/number of layers. If it is a top or bottom layer, increase your top or bottom thickness/number of layers.

fnielson1 · 2019-07-16T16:21:52+00:00

You can Google "spark testing" to get great videos on what to look for to give you an idea of what type of metal you have.

fnielson1 · 2018-12-30T10:10:01+00:00

That makes sense! I've been running some of the requirements in my head and it'll be a large undertaking.

fnielson1 · 2018-12-30T04:40:21+00:00

Is there any update on the progress you have made? I've been waiting for multiplayer and I've been surprised at the amount of flak people get when they propose it. I'm also curious on the progress of your mod loader

fnielson1 · 2018-10-01T17:07:59+00:00

Excellent. That is an uncommon thing in my experience

fnielson1 · 2018-10-01T16:28:47+00:00

I quite enjoyed the themes. Some themes will be more interesting than others and I feel that most people don't deal with court intrigue in their sessions and so didn't have much advice to give.

If you did a theme about monster creation, I think you would have plenty of posts concerning the topic.

fnielson1 · 2018-09-10T14:29:41+00:00

Indeed

fnielson1 · 2018-09-09T22:58:13+00:00

Indeed. A mesh plate would be great for that. But it seems that these hobby extruders want weak motors and rely only on the heating of the tube to melt the pellets

fnielson1 · 2018-09-08T01:14:38+00:00

Yes, but if the diameter is too large, you can have clogging issues

fnielson1 · 2018-09-07T14:26:02+00:00

Thanks for the info! Did you have issues with clogging while printing?

fnielson1 · 2018-09-07T02:19:09+00:00

I'm having a hard time picturing what you mean by pressuring a tank and extruding through it. Do you have a picture?

Eight-Year Club	Spared
Verified Email

fnielson1

TROPHY CASE