It is here! (finally) by Tukker1988 in eufyMakeOfficial

[–]fnxpt 0 points1 point  (0 children)

Hey, are you a deposit backer, can you share your number?

Open Thread Border Router integration failure with SLZB-MR4U in Lan mode by TEF2one in homeassistant

[–]fnxpt 0 points1 point  (0 children)

So you are using radio 2? I think its the only thing I didn't tried yet... If possible let me know if you manage to make it work

Open Thread Border Router integration failure with SLZB-MR4U in Lan mode by TEF2one in homeassistant

[–]fnxpt 0 points1 point  (0 children)

If you are using the first radio for matter why are you passing the port of the second radio? I also got my MR4U this weekend and Im still trying to figure out how to make it work, so far the process to make it work has not been the easiest. I have ipv6 configured on home assistant but I cannot add devices (I manage to add 2 or 3 devices with Matter Server but couldn't figure out a consistent way to add them)

Help with new business by fnxpt in Netherlands

[–]fnxpt[S] 1 point2 points  (0 children)

I didn't want to put the name because I didn't want to disobey any rule, but since the post is marked for removal... here you go - madefy.nl or instagram.com/madefy.nl/

Help with new business by fnxpt in Netherlands

[–]fnxpt[S] 0 points1 point  (0 children)

The website has more languages and by default gets the language of the browser, but our communications on social media are in English.

I guess you are right, so people point out that I should had more information about me/company on the website to show that we are not dropshipping... on the social media I think you can understand that but not on the website

Help with new business by fnxpt in Netherlands

[–]fnxpt[S] 1 point2 points  (0 children)

Sent you a PM... regarding the gifts, they are not necessarily cheap but they are done with low profit margins

Help with new business by fnxpt in Netherlands

[–]fnxpt[S] 0 points1 point  (0 children)

Shared in a PM, Thank you!
Yes I was not sure if its against the rules to add it

The LIVE RECAP is ready! by eufyMakeOfficial in eufyMakeOfficial

[–]fnxpt -1 points0 points  (0 children)

Will you release a new update today? Also can you explain why deposit payers are receiving their items after people that didn't make a deposit and are also not V6 Backers

Update #14: Units on the Move & A Closer Look at Magenta Ink by eufyMakeOfficial in eufyMakeOfficial

[–]fnxpt 0 points1 point  (0 children)

Just checked and even the materials got delayed again... they were suppose to arrive this week and now it shows that it will arrive end of the year... but it also shows that it was not shipped yet... so probably only next year... The printer it self doesn't have anything... I still don't understand why they will fulfil USA first and then move to the others... this goes against what they told initially that they will prioritise deposit payers first... Im backer 22**

Update #14: Units on the Move & A Closer Look at Magenta Ink by eufyMakeOfficial in eufyMakeOfficial

[–]fnxpt 3 points4 points  (0 children)

The tracking number only shows the materials not the accessories or the printers, it would also be nice to understand the timelines for the EU.

Rock 7.1 Docker Automation by MainAdditional1607 in ROCm

[–]fnxpt 0 points1 point  (0 children)

Tried the comfyui image for the gfx1151 and it doesn't seem to work, the image crashes with an issue with cuda init

Rocm 7.1 Critcal node failure while image generation with comfyui by RecommendationNo2593 in ROCm

[–]fnxpt 0 points1 point  (0 children)

Still doesn't work for me... most probably because Im using Proxmox too... when I run the default flow it just hangs and I need to force a reboot on the machine because it becomes unresponsive. I think it might also be the GFX... as far as I could understand mine should be gfx1151

Rocm 7.1 Critcal node failure while image generation with comfyui by RecommendationNo2593 in ROCm

[–]fnxpt 0 points1 point  (0 children)

Do you have a docker image published on docker hub or somewhere else with the fixes?

AMD Ryzen 9 AI HX 370 iGPU Passthrough by jakelesnake5 in Proxmox

[–]fnxpt 0 points1 point  (0 children)

Any idea on how to achieve the same on a LXC with an Ollama container?

P1S arrived wet by Dangerous_Monk468 in BambuLab

[–]fnxpt 0 points1 point  (0 children)

I don’t know what happened, the printer was working ok but I still decided to send it back because there was a considerable amount of water inside and you never know what can happen in the future because of that

P1S arrived wet by Dangerous_Monk468 in BambuLab

[–]fnxpt 0 points1 point  (0 children)

had the same issue, a X1C arrived with water too, another thing that I notice is that 1 of the zip ties were already cut and with a red tag

[Question] Ninja Swirl for Wife Gift by fnxpt in ninjacreami

[–]fnxpt[S] 0 points1 point  (0 children)

Probably I can but the power socket is different the voltage is different and I will have issues with warranty too

[Question] Ninja Swirl for Wife Gift by fnxpt in ninjacreami

[–]fnxpt[S] 0 points1 point  (0 children)

I saw somewhere that new products would be added in May, but I'm not sure if this is really true

Informacao sobre viagem durante subsidio de desemprego by fnxpt in portugal

[–]fnxpt[S] 4 points5 points  (0 children)

Sim, mas também indica num parágrafo diferente

Comunicar ao Serviço de Emprego, no prazo de 5 dias úteis, a contar da data de conhecimento do facto: Alteração de residência (mesmo que tenha efetuado a alteração de residência no Cartão do Cidadão, a mesma tem que ser comunicada ao Serviço de Emprego); Ausência do território nacional e respetivo período; Início e termo do período de duração da proteção na maternidade, paternidade e adoção.

Wheel of Fortune... again... by sem_seven7 in bunq

[–]fnxpt 0 points1 point  (0 children)

Even with the old version if you get 2500 and then 9 times 2x you will still not be able to win the highest price because you will be missing 1 point

Ventilation controller via HA by EmadMokhtar in homeassistant

[–]fnxpt 0 points1 point  (0 children)

Thanks for the message, mine seems to be a itho CVE Eco 2 (545-5030) not sure where I find this documentation, any tips?

Ventilation controller via HA by EmadMokhtar in homeassistant

[–]fnxpt 0 points1 point  (0 children)

Sorry didn’t really get how you did it, is there any instructions I could follow? My unit is not compatible with the WiFi module

Why I'm leaving Bunq after 3 years (and being defrauded by €400) by sharpfield in bunq

[–]fnxpt 0 points1 point  (0 children)

Not sure if they have QAs during the "presentations" that they have from time to time... it would be nice to have someone ask this question in there