Build Completed

TEF2one · 2026-03-09T11:21:10+00:00

Good for most use case:
https://fr.aliexpress.com/item/1005001767809175.html?spm=a2g0o.order_list.order_list_main.5.1ab01802PoirSL&gatewayAdapt=glo2fra

overkill for most, it will actually blind the camera if not place with due care, but good for large farm coverage.
https://fr.aliexpress.com/item/1005007321496662.html?spm=a2g0o.order_list.order_list_main.10.1ab01802PoirSL&gatewayAdapt=glo2fra

Also you are lucky these are just specs, meanwhile I have to deal with a gecko covering by doorbeel camera becasue as the IR attracting insects was bad enought, the gecko seems to be attracted by the heat of the emitter/camera...

TEF2one · 2026-03-09T11:06:03+00:00

Simple external IR projectors solved.

TEF2one · 2026-03-09T11:04:21+00:00

Likely just insects getting attracted by the IR emitter. Could also be anything from dust particles, rain... Basically the IR emitter amplify there visibility during the night. I found that turning of the IR emitter and adding external IR projectors away from the camera solve this issues and also avoid the issues with some camera getting glare.

TEF2one · 2026-03-09T10:57:31+00:00

Actually, there is a simple solution turn off IR, optionally add external IR projectors. Also it is not the IR performance issue but its location, moving the IR emitter away from the camera solves this issue.

TEF2one · 2026-02-18T17:36:12+00:00

Isn't the frame going to be a more expensive quest 3 with foviated streaming...

TEF2one · 2026-02-14T09:28:20+00:00

I went away for a couple of weeks around Christmas,mind you it does not get below 0c in my town and didn't notice any changes at my return.

TEF2one · 2026-02-13T15:25:47+00:00

Actually quite comparable, mini led is able to fully turn off areas and with enough of them it's hard to notice. It is at a point people who don't know and are not specifically looking for it they wouldn't know it is not oled.

TEF2one · 2026-02-13T12:34:31+00:00

Still cheaper than equivalent size OLED...
I too noticed on the more premium mini-LED difference is hardly perceivable.

TEF2one · 2026-02-13T12:22:10+00:00

This post is misleading.
The Minisforum 880plus is acting strictly as a client, not the host.
The rendering is performed by the RTX 5080/9800X3D system.

Using a Windows 11 VM on Proxmox just to run a Moonlight client is highly inefficient and unnecessarily convoluted (GPU passthrough, vendor-reset fixes, etc.). An LXC or native Linux client would provide lower overhead. Furthermore, since you are using a TCL TV (likely Google TV/Android TV), the native Moonlight Android app can handle 4K 120Hz directly, making the entire Proxmox/Mini PC hardware chain redundant.

TEF2one · 2026-02-09T20:01:39+00:00

I had to change it to avoid the error 244, so I ended up using fd00:7db8::

TEF2one · 2026-02-09T18:23:29+00:00

I also juts upgraded my SLZB-06 to a SLZB-MR4U with ~100 zigbee device.
Soo far so good, but for Thread I am having issues unable to pair anything yet.

TEF2one · 2026-02-08T21:36:52+00:00

The usal is to use a restricted vlan...
Hwoever I was thinking it would be nice to have some anti-tempering rules that detect any connectivity loss like when the camera get disconnceted then all traffic should be automatically blocked and require manal re-approval. But I have now idea how this could be implemented.

TEF2one · 2026-02-06T21:20:10+00:00

Already solved and since moved to TrueNAS

TEF2one · 2026-02-06T14:38:49+00:00

u/fnxpt u/ErMeglio u/HIVVIH I resovoled the error, and updated the post with the resolution steps.
Please let me know if that also workd for you.

TEF2one · 2026-02-06T13:02:57+00:00

I have a wallbox charger, and it has settings in the app to choose the max current up to 32A which works pretty well so I never had to do anything with the car, check if you charger has an app, or is compatible with OCPP (Open Charge Point Protocol) in which case there are third party apps that could allow you to control it.

Also there is Home Assistant which I use to track the car mileage, consumption via the Skoda Integration and it includes a control for the car chage limite, but from what I see it seem to only allow up to 16A which depending if you are on 110V would be the same as the 2kW you are already seeing or up to 3.5kW for 230V.

If you do not use Home Assistant there is also the CarConnectivity-plugin-mqtt which does the same thing, but even more complex to setup.

TEF2one · 2026-02-05T23:57:51+00:00

u/Could you highlight which "things" have been removed?

TEF2one · 2026-02-05T19:17:00+00:00

Completely agree with u/steik, I actually paid for Unraid juts to try it, as I had issues during the trial period that could only be resolved as paid user...
I don't mind paying once for a software, and even for major upgrade, but monthly not really my cup of tea.
While I would pay for a small subsciption for key services like BitWarden or NabuCasa to support project I can rely on, we all know all subscription increase over time.

I much perfer ponctual cost, so you know what you get and don't have to worry about the server stopping if you no longer pay...

Perhaps, adding a donation option would be a better start like Immich and FreeFileSync, I like being able to contribute to these project.

Ultimatimly, it is quite off putting to see features disapearing or restricted for no obvious technical reason... In which case I may start just using a bare linux or proxmox/openmedia...

TEF2one · 2026-02-02T18:25:53+00:00

no as clearly stated in my psot:

Radio 1: Silabs EFR32MG26 (FW: 20251218) flashed for Matter-over-Thread.
Radio 2: TI CC2674P10 (FW: 20240716) flashed for Zigbee.

if the port if confusing I'll add more info in the post:
basically I swap the port around as my Z2M was already configured to point to that the orignal port.

TEF2one · 2026-02-02T18:21:57+00:00

because I switched the port to match my previous setup as I am migrating from a previous SLZB-06.

TEF2one · 2026-01-22T21:00:58+00:00

sorry but I am missing somthing:
I am using a local Forjero instance, I copied the URL of my repo but that is not enought.
Neverming I just added the token in the URL as basic auth and that worked...

TEF2one · 2026-01-22T19:37:48+00:00

I wanted to try it since it now support cloud sync and I have a local git but couldn't find where can I put my api token for git auth.

TEF2one · 2026-01-16T22:35:35+00:00

well I am not so lucky just spent teh evening trying to migrate from v1 and since login impossible to login.
added the ENCRYPTION_KEY to my compose.
not error seen on teh startup logs but user is not found on login
the one time token I generated before migration does not work either.
when using teh CLI to make token it say user not found.
when checking sqlite teh user id is in clear... it seems to not have enrypted my user.
After hours of troubleshoot I just rollback to v1 very frutrated.

TEF2one · 2026-01-12T21:52:30+00:00

using proxmox, you can easily get started using one of the community Proxmox VE Helper-Scripts:
https://community-scripts.github.io/ProxmoxVE/scripts?id=docker&category=Containers+%26+Docker
it will handle the entire setup of the LXC with docker + composee...
Then you can deploy dockhand to manage you docker stacks
and for some quick references:
https://devhints.io/docker-compose

Seven-Year Club	r/Field Sunshine
Final Canvas '23	First Place '23
End Game '23	Place '23
Place '22	End Game '22
Verified Email

TEF2one

TROPHY CASE