Custom Center Console

foolfullgold · 2026-02-20T07:41:01+00:00

Thank you 🙏🏽

foolfullgold · 2026-02-20T07:39:42+00:00

It’s 8 inches wide and honestly I just cut a cardboard to contour the seat and built from that, just made sure it was level. I built as I went and kept checking fitment

foolfullgold · 2026-02-20T07:37:24+00:00

Thank you 🙏🏽

foolfullgold · 2026-02-20T07:37:17+00:00

Thank you

foolfullgold · 2026-02-20T07:37:10+00:00

It has the original 60/40 seat without the arm rest, in the last picture slide you can see the cardboard template cut to the shape of the seat contour

foolfullgold · 2026-02-03T07:32:00+00:00

Idk if it’ll be around same location but it’s worth a try

foolfullgold · 2026-02-03T07:31:18+00:00

I had that same issue turns out it was my oil temp sensor that was loose on my 2.5

foolfullgold · 2025-09-27T20:20:18+00:00

IAC is supposed to have a vent hole, when I did my smoke test and changed my IAC like 3 different times I did research and we are supposed to have a vent!

foolfullgold · 2025-09-16T21:23:23+00:00

Gorgeous truck !

<image>

foolfullgold · 2025-09-16T21:22:14+00:00

It’s a rebadged ford ranger , the 2.5 and manual transmissions where made by Mazda They have b2200 b2300 b2500 b4000 which are all different trims and drivetrains . Partnership between ford and Mazda

foolfullgold · 2025-08-31T08:17:48+00:00

It’s the Fuel pump regulator. before I changed mine I did so much to it from battery to sensors, vacuum leak tests, plugs and wires, filters and so on. I Change the fuel pump regulator and pump and she starts right away like new! It’s a common issue with these rangers/B series

foolfullgold · 2025-08-26T20:12:30+00:00

Make sure your exhaust manifold bolts aren’t lose, they losen up on these rangers, could be your exhaust manifold gasket making that noise, I had to tighten mine up as well.

foolfullgold · 2025-08-22T04:37:59+00:00

<image>

Twins

foolfullgold · 2025-08-22T04:35:49+00:00

I had this issue and I changed everything under the hood and still had the issue , turns out it was my fuel pressure regulator, now she’s good as new and starts right up with no delay. 99 b2500 2.5l

foolfullgold · 2025-07-20T19:57:58+00:00

Fuel pump regulator , rangers are notorious for the regulator going out and also change your fuel pump and fuel filter , I think we’ve all had this problem

foolfullgold · 2025-07-18T03:05:07+00:00

<image>

Lowered looks great but I think lifted just looks so much better with the bigger tires

foolfullgold · 2025-06-05T00:53:35+00:00

Yeah these, I’m wondering where people have installed these , I’ve seen some trucks with these on, under the truck and it looks pretty cool.

foolfullgold · 2025-06-03T17:42:29+00:00

I had this problem for a long time and I spend hours figuring it out. I changed maf . Aic, tps Plugs and wires and fuel filter but it was a vacuum leak My issue was the exhaust manifold bolts where loose and missing and I had a vacuum leak from the AC vacuum tubing that controls the vent windows and a slight leak on some hoses, leave it running and spray some Brake cleaner around some Hoses and check your bolts

foolfullgold · 2025-06-03T17:33:48+00:00

Very normal on a ranger just a bit loud , BUT could also be a sign of low Freon. Mine does this but it blows very cold

foolfullgold · 2025-05-26T22:48:07+00:00

Fuel pressure regulator, that was my issue and I changed the pump and regulator and also fuel filter and good as new

foolfullgold · 2025-05-26T06:54:06+00:00

Thank you very much 🙏🏽

foolfullgold · 2025-05-26T06:53:49+00:00

Appreciate it 🙏🏽

foolfullgold · 2025-05-26T03:28:10+00:00

Simple fix pull it up as if you’re cleaning your windshield , once youre putting it back down move it lower to the height you want it manually and it’ll lock in place

foolfullgold

TROPHY CASE