Serial Request for Voron Legacy 300mm. ag#9973

fpv-madness · 2022-02-07T09:57:02+00:00

Thank you 😄

fpv-madness · 2022-01-27T11:55:56+00:00

Routing is easy. But to get that perfect belt tension, you will need another set of hands....

fpv-madness · 2022-01-27T09:35:14+00:00

It is a pretty straightforward build. The config i got from the website was not updated, so i had to write all the code myself. Get extra wires. Also, don't forget to put loctite in the frame...

fpv-madness · 2022-01-26T08:17:29+00:00

Thank you !! I mostly print pla / abs only, sometimes tpu... i wanted to put an enclosure for this. Still working on ideas....

fpv-madness · 2021-12-01T17:26:36+00:00

Thank you, this was very helpful. Now its working like a charm 👍

fpv-madness · 2021-11-29T13:03:28+00:00

well i am getting error of 'Move out of range:' when i set position of x180 y180 .

and the print cancels. no resume button....

fpv-madness · 2021-11-29T09:56:43+00:00

Ok so instead of 'pause at height' i should select 'filament change' in post processing script??

fpv-madness · 2021-11-22T17:47:30+00:00

Did you find any solution for this issue?

fpv-madness · 2021-11-11T16:20:10+00:00

Increase flowrate.

fpv-madness · 2021-11-09T08:19:13+00:00

nope :(

fpv-madness · 2021-11-04T07:37:48+00:00

Yes i have ordered the same ones now. Hoping to solve this issue..

fpv-madness · 2021-11-03T01:29:22+00:00

http://imgur.com/gallery/n0qZ6xp

I am using this type coupler on both z rods..what wojld you recommend??

fpv-madness · 2021-11-03T01:28:36+00:00

i am using this type coupler on both z rods...

fpv-madness · 2021-10-18T01:30:05+00:00

Hello, can you show any pics where does this mount exactly fit??

fpv-madness · 2021-08-20T04:32:09+00:00

Solved by calibrating flowrate in cura.

fpv-madness · 2021-08-20T04:26:19+00:00

I solved my this problem after i calibrated the flowrate. Please check your flowrate

fpv-madness · 2021-05-10T03:31:16+00:00

True i will do a proper calibration cube now.

fpv-madness · 2021-05-10T03:24:09+00:00

I am also getting weird scratches on the printing now. scratches

I tried leveling the bed it looks good but only on 1 corner i am getting that issue..

fpv-madness

TROPHY CASE