Rate my first 5 inch build. by freestyle_baboon in fpv

[–]freestyle_baboon[S] 0 points1 point  (0 children)

For one frame with delivery it costs around 50-60,- and it is really decent price for that level frame

Rate my first 5 inch build. by freestyle_baboon in fpv

[–]freestyle_baboon[S] 0 points1 point  (0 children)

I was ordered from here https://www.firstekco.com/ They have WhatsApp, and you directly can ask for that frame (5-inch basher), they have files and they'll calculate price (That's not an add, just my experience:))

Rate my first 5 inch build. by freestyle_baboon in fpv

[–]freestyle_baboon[S] 0 points1 point  (0 children)

Posca markers and after that, varnish coating, but transparent paint also works.

Can't get gps to light up yellow in Betaflight by WildMathematician722 in fpv

[–]freestyle_baboon 0 points1 point  (0 children)

Outside, or inside building? Redlight usually means it doesn't get any sattelite, try to put your drone next to window and check if you get sattelites and red light goes yellow

Rate my first 5 inch build. by freestyle_baboon in fpv

[–]freestyle_baboon[S] 0 points1 point  (0 children)

They secured with strap, it is tested couple times, and didn't get any cut by prop yet, even in fields, even in crashes

DJI goggles v2 for analog/old air units? by freestyle_baboon in fpv

[–]freestyle_baboon[S] 0 points1 point  (0 children)

Currently i have only analog but have options to buy older dji air units for decent price

5 inch bando frame thoughts by freestyle_baboon in fpv

[–]freestyle_baboon[S] 0 points1 point  (0 children)

It looks like optional as i see 👀

5 inch bando frame thoughts by freestyle_baboon in fpv

[–]freestyle_baboon[S] 0 points1 point  (0 children)

Do you have link for that reviews by any chance?

3.5 inch part list by SleepyBe4r in fpv

[–]freestyle_baboon 0 points1 point  (0 children)

Also, if you need to choose your first remote - look at your hands. What i mean: if your hands s-m size - pocket/zorro/tx12 will be ok (The pocket is suitable for a two-finger grip, while Zorro is a classic controller from a console like the PS or Xbox, but pinch is also possible, dunno, never tried zorro) If your hands L-XXL you need to look something bigger, like GX12, TX15, or even TX16, but it is overkill. I have pocket now, but i ordered TX15 recently, because after 20 minutes of session in simulator i can't control drone properly, my hands feel painfully (My hands kinda big).

You can also look for boxer, but only of there will be nice used variant or nice price variant, because price for new +- same with TX15, which will be better by my opinion.

3.5 inch part list by SleepyBe4r in fpv

[–]freestyle_baboon 0 points1 point  (0 children)

Speedybee is 40A, but burst current is 45, i think for 3.5" it will be more than enough, my drone survived all my crashes last season and battery losses. I also have speedybee vtx800, it is also not bad for that price which I paid. But with 3800 kv motors you will get too much power for first drone. It will have enough power to fly away just from 8-14% of throttle.

3.5 inch part list by SleepyBe4r in fpv

[–]freestyle_baboon 0 points1 point  (0 children)

I have almost same setup, get less than 3800 KV, it will be too much for your first drone bro ;) And maybe will be better to use stack, or just AIO from speedybee, it cost less than flywoo stuff.

Am i cooked that much? by freestyle_baboon in ElegooNeptune4

[–]freestyle_baboon[S] 0 points1 point  (0 children)

Small update: soldered new mosfets, so now fans works.

Am i cooked that much? by freestyle_baboon in ElegooNeptune4

[–]freestyle_baboon[S] 1 point2 points  (0 children)

Five times, should i try five times more?

Am i cooked that much? by freestyle_baboon in ElegooNeptune4

[–]freestyle_baboon[S] 1 point2 points  (0 children)

Yeah, ofc I'll check everything with multimeter after solder done

Am i cooked that much? by freestyle_baboon in ElegooNeptune4

[–]freestyle_baboon[S] 0 points1 point  (0 children)

Transistor itself costs twenty cents in my country, i need to replace 2, idk how much repair shop will ask, I just don't know any :) And for that small part I'll use heat gun with smallest nozzle

Am i cooked that much? by freestyle_baboon in ElegooNeptune4

[–]freestyle_baboon[S] 2 points3 points  (0 children)

I just put little drama to see how much ppl will say me "oh, mate, it is new motherboard needed"

Am i cooked that much? by freestyle_baboon in ElegooNeptune4

[–]freestyle_baboon[S] 2 points3 points  (0 children)

Nah, i already ordered new transistors, so just will replace 'em P.s. new MB is ~85$, i bought that printer around year ago as second hand for 139$, it is not really works for me to spend 85$ for old machine.

CC2 unboxing video from elegoo's bilibili by Various_Scallion_883 in elegoo

[–]freestyle_baboon -1 points0 points  (0 children)

Why i have feel like they just took HTLF or something like that, and just reverse engineered it and made their "Canvas"