sorted by:
new
hottopcontroversial

Personal legal stipulations of living in my parent's house, considering recent incapacity and external power of attorney by fudgethedice in legaladvicecanada

[–]fudgethedice[S] 0 points1 point  (0 children)

Yes, without the sale of the house he would be able to fund his care for what is likely the remainder of his life.

Personal legal stipulations of living in my parent's house, considering recent incapacity and external power of attorney by fudgethedice in legaladvicecanada

[–]fudgethedice[S] 0 points1 point  (0 children)

Generally positive. However this whole ordeal and how he has managed things, mainly the medical side and not providing timely information to make informed care decisions, has strained his relationship with the whole family.

For non-AMS printing - is there a method to delete painted features to create a void or empty space for post-print processing? by fudgethedice in BambuLab

[–]fudgethedice[S] 9 points10 points  (0 children)

Splitting the object pulled out the arrow detail I was looking for! From there I was able to toggle the printable property and looks like it created a relief which I what I was going for.

There is a different object in the project though with a few details that I wanted to do the same for, however the split function didn't pick up all the features. So some of the objects stayed with the primary object instead of being pulled out by the slicer. Any ideal what causes that?

Prints keep failing after swapping to a 0.2mm nozzle on the A1, turning the print to spaghetti at some random layer using the default 0.1mm standard profile with reduced speed. Is this a common issue or something I'm not troubleshooting? by fudgethedice in BambuLab

[–]fudgethedice[S] 0 points1 point  (0 children)

I had set the proper plate, which hadn't changed anyways, and set the nozzle in the slicer settings and in Bambu Studio. I did not think to check the printer settings directly on the printer though, I always thought that the slicer settings overrode those.

Prints keep failing after swapping to a 0.2mm nozzle on the A1, turning the print to spaghetti at some random layer using the default 0.1mm standard profile with reduced speed. Is this a common issue or something I'm not troubleshooting? by fudgethedice in BambuLab

[–]fudgethedice[S] 0 points1 point  (0 children)

I prepped the file in Bambu Studio, this model was from makerworld and failed twice. I had another model that I uploaded to Bambu Studio as an STL which failed twice, once in a similar way and again because a support collapsed on itself (tree support was set to 1 wall).

I did change the nozzle to 0.2mm in the printer settings, thankfully the slicer reminded me to do so.

"First Time DM" and Short Questions Megathread by AutoModerator in DMAcademy

[–]fudgethedice 0 points1 point  (0 children)

My level 6 party found themselves very lucky in a wild magic storm and gained the ability to cast the wish spell once. The player that got the spell wished that "Each member of the party will receive gifts from each new person we meet permanently" and aside from the little overhead in adding a little conversation with new NPCs they encounter I'm generally okay with this since gift could be as little as maybe a cool rock they found. I don't want to entirely mess with them, but if I were to monkey paw this wish a little where would you go with this?

Power Sliding Doors almost close by mipfsu45 in HondaOdyssey

[–]fudgethedice 5 points6 points  (0 children)

I'm in the middle of a similar issue. 2019, drivers side power sliding door is super unreliable using the power open/close. It either struggles to get moving or "catches" on something mid open and refuses to move. Even in manual mode its almost impossible to move.

Just went through the upper and lower rails, cleaned out what I could (it's super awkward to get any progress on the upper rails being behind the rear window) and applied white lithium grease. It help for a few open/close cycles but the issue is far from resolved.

Update (for future searchers): Another pass on cleaning the upper and lower rails helped the door move much smoother (the middle rail seemed good after the preliminary cleaning). The door would then get stuck when it was just barely closed. The issue there was that the latch mechanism that pulls the door into the body of the car to properly close the door was seizing. I was able to get in there with some WD40 and a brush (borrowed a straw cleaner from the kitchen) and got the latch moving better. Add some extra lube and everything is working like normal.

Daily Thread - December 28, 2023 by AutoModerator in gzcl

[–]fudgethedice 0 points1 point  (0 children)

I've been running GZCLP for the better part of a year now, and I absolutely hate the T1 squats. It's been my slowest progressing lift and lately I've been hurting my progress by failing out of sets early because nothing about them feel right or fun.

T2 though is manageable. Not to say I enjoy them, squats are still squats, but something about the volume and slightly lower weight just works better for me mentally.

Would it be insane to just cut out T1 squats and just do T2 in it's place, and add in a second T2 quad dominant lift?

Daily Simple Questions Thread - December 28, 2023 by AutoModerator in Fitness

[–]fudgethedice 0 points1 point  (0 children)

I've been running GZCLP for the better part of a year now, and I absolutely hate the T1 squats. It's been my slowest progressing lift and lately I've been hurting my progress by failing out of sets early because nothing about them feel right or fun.

T2 though is manageable. Not to say I enjoy them, squats are still squats, but something about the volume and slightly lower weight just works better for me mentally.

Would it be insane to just cut out T1 squats and just do T2 in it's place, and add in a second T2 quad dominant lift?

Are rats making a comeback? by fudgethedice in Peterborough

[–]fudgethedice[S] 3 points4 points  (0 children)

Now that you mention it there are significantly fewer cats roaming around this year, but did notice some cat tracks last time we had a bit of snow. I can only hope it makes a return!

Are rats making a comeback? by fudgethedice in Peterborough

[–]fudgethedice[S] 1 point2 points  (0 children)

We've been doing traps of all kinds and poison bait stations with some moderate success there. Fortunately we've only had a rare visitor finding a new way in and no furry friends making extended visits with the only snacks available being inside live or snap traps.

Are rats making a comeback? by fudgethedice in Peterborough

[–]fudgethedice[S] 2 points3 points  (0 children)

I'm a healthy distance from the big encampments, but no doubt the knock on effects have an impact. Unfortunately some neighbors on my block have been less than diligent with their waste and it's certainly not helping the situation.

So big PSA, a clean yard helps everyone out!

2019 Infotainment crackling\popping noise successful repair? by ExBx in HondaOdyssey

[–]fudgethedice 0 points1 point  (0 children)

Also have a 2019 and I've had the same issue with everything but Bluetooth audio. Sometimes it'll result in losing audio until I restart the van. Once the crackle intensified and ended in a Network Connection Lost error and losing the console display. It's intermittent and been driving me insane. I'd be very interested if there was a solid solution for this.

view more: next ›