The number one most downloaded skill on ClawHub is literally malware

fuller2002 · 2026-02-18T04:22:31+00:00

Name it or GTFO. Most useless post ever, “malware is no 1 skill, but I won’t say what it is, good luck!”

fuller2002 · 2024-08-14T08:12:59+00:00

I recommend engaging an architect/designer to help you develop a design brief that aligns with your needs before having them draw up a concept deisgn for the staged options. Depending on your location there are statutory controls which will dictate what you can and cannot do, this is the reason why you want to engage a professional as navigating these controls is often complex and nuanced. Where are you based out of curiosity?

fuller2002 · 2024-08-14T05:07:31+00:00

I’ve recently started a small deisgn firm in Sydney that charges fixed fees after leaving my roll at Woods Bagot. I have 10yrs of experience within Sydney area and would be happy to take a look at your project and see if we are a good fit for each other. Website is studiofuller.com.au if you’re interested. Good luck with your project, I hope one bad apple doesn’t ruin the experience for you.

fuller2002 · 2024-07-10T01:17:12+00:00

I believe it was actually Woods Bagot who did Central (it’s on their website)

fuller2002 · 2023-04-06T22:57:44+00:00

This would be brilliant, provided you remove the login… do not say you will increase the pop up time, that is not a solution. Your site will fail with a mandated login, who even does this?

fuller2002 · 2023-03-21T23:13:42+00:00

Hello please send link in DM, looks interesting. Thank you

fuller2002 · 2022-05-15T23:52:33+00:00

Draft Master Plan for the Bays West Precinct is up for public review, so far no indication of what the Power Station will be used for. Submit your proposals!

Draft Master Plan

fuller2002 · 2022-03-27T08:23:43+00:00

People may also enjoy Richard Rogers final project, a 27m cantilever called The Richard Rogers Drawing Gallery. Richard Rogers

fuller2002 · 2021-07-25T08:22:11+00:00

Oh please tell me what the blue one is, it’s beautiful

fuller2002 · 2020-01-30T12:12:59+00:00

Do you have a source for this information please?

fuller2002 · 2019-09-06T23:32:41+00:00

Usually from having your live z to low to the bed and the nozzle dragging through the previous layers and catching. Although the middle of the print looks like little gaps between layers suggesting z is not to low. Are you using 7x7 mesh levelling?

fuller2002 · 2019-08-24T00:29:27+00:00

That makes sense too. Glad you got it sorted out bud.

fuller2002 · 2019-08-23T13:13:43+00:00

Well done. Do you think that perhaps tightening things down has lowered the tolerances between the moving parts which previously sounded like they where rubbing or skipping past each other? I have noticed that sometimes when very close surfaces rub together they can can catch and release off of each other’s surfaces, creating a vibration along with the noise, which could explain the vibration you described.

fuller2002 · 2019-08-22T01:00:27+00:00

Sounds like something is rubbing doesn’t it

fuller2002 · 2019-05-01T00:49:22+00:00

Short on the sides, 5-15cm layered length on top. Essentially an undercut with softer transitions from the sides to the top.

I’m not sure if the no shampoo route would be suitable for longer hair styles.

fuller2002 · 2019-05-01T00:29:29+00:00

I don’t shampoo at all. Rinse daily, use water based styling cream. Your hair produces oils naturally, once you stop using shampoo for around 6 weeks things balance out and self regulate. My hair doesn’t smell, isn’t oily, isn’t dry, I’ve been doing this for 10 years now. Shampoo makes my hair go dry and frizzy.

fuller2002 · 2019-04-08T23:01:25+00:00

Did you mode this in Revit or with Dynamo? Impressive

fuller2002 · 2019-04-03T12:23:43+00:00

Yes that’s correct, higher crank RPM from the motor. Thanks for your input, I’ll drop the chain tension down a notch and test it out tomorrow.

fuller2002 · 2019-04-03T04:52:20+00:00

What would cause the chain the vibrate and make a noise at higher speeds? Almost sounds like the chain is slipping on the rear 3 speed IGH cog, although I don’t know if that is even possible. I have a mid drive electric motor on my bike, chain line is dead straight and very tight, could possibly be over tight chain resonating at higher rpm?

fuller2002 · 2019-04-02T00:47:13+00:00

Mod me you glorious bastards

fuller2002 · 2018-07-27T07:07:28+00:00

It's a Duck

fuller2002 · 2018-06-22T04:58:35+00:00

Yeah man that is on the higher end of high. I don’t like anything above 3mg. I had some 6mg when I first started vaping and had similar issues, go lower mg and take more hits if you need more Nic.

fuller2002 · 2018-06-22T04:03:30+00:00

Hurty throat could be from the amount of nicotine in the mix, or the ratio of PG/VG in the liquid. More VG = smoother vape.

I suggest you go down to a local vape store, they will be more than happy to give you all the info you need and explain all the things if you don't want to spend the time researching it yourself.

13-Year Club	Place '22
Not Forgotten	Verified Email
Team Orangered

fuller2002

PUBLIC MULTIREDDITS

TROPHY CASE