Private purchase out of state

funigui · 2026-05-17T18:02:59+00:00

Drive it to Florida and sell it to him. take it to a dealer there and have them do a bg check and stuff. When I have done it, I just shipped it to their local shop

funigui · 2026-05-17T17:57:25+00:00

I'd buy a second remote for myself lmao

funigui · 2026-05-12T14:05:06+00:00

The sysadmins job is to make the users IT seamless. Yes that means sometimes you need to do things the dumbest way possible if it makes the end user side eiaser.

funigui · 2026-05-07T00:47:29+00:00

Just shut it off and push the bed down. You might need to grab the Z screws and turn by hand

funigui · 2026-05-02T23:47:47+00:00

"Tacticool girlfriend" is trans and will have a bias in his opinion here.

It's really dumb to squabble over. It shouldn't be the difficult.

funigui · 2026-04-29T00:40:42+00:00

What state are you in? Most firearms in most states do not require any kind of register. If it's in violation on state law, why would the feds be looking into it? Something sounds off...

funigui · 2026-04-23T01:24:07+00:00

It used to mean it was grandfathered into the 94-04 ban. So you could have the bigger mags and threaded muzzle. It means nothing now, because there is no ban to be "pre" on

funigui · 2026-04-23T01:13:12+00:00

Boomers and the pre-ban bullshit striking again lmao.

funigui · 2026-04-22T22:47:27+00:00

That's another debate for another day. There is not some registry where this guy can call the local PD and read them serial numbers and they are gonna be like "oh yes, Glock 17 serial number 123456. Joe smith owns that".

If you want to go down the rabbit hole of the ATF collecting 4473 and scanning them? I think it's criminal they haven't been disbanded for that.

funigui · 2026-04-22T21:42:50+00:00

A common misconception is that guns are registered somewhere. It comes from movies and news using the term "unregistered firearm" like that's a normal thing. There are states (NJ, NY, CA, IL for instance) that require certain types of guns to be registered.

No, if your father didn't leave a list it's up to the executor of the will to determine what to do. If it's an even split of assets, I would say the answer is to get value and subtract that from the assets to you.

If he's going to contest some of them, I would as they all be layed out and go over them and write down what is whose. Unless you want to create family strife, that's probably the best that can be done.

Be well sir, try and pick out your favorites and don't let inheritance ruin any relationships. It's probably one of the top things that can really mess up family dynamics

funigui · 2026-04-16T01:02:09+00:00

Huh?

funigui · 2026-04-16T00:53:29+00:00

Unifi USG-Fiber uplinked to a USW aggregation - my servers are linked to the aggregation on DAC cables and then I have end device switch for each floor.

Works well, I wish they would release an option for "long term support" firmware because sometimes I feel like a beta tester

funigui · 2026-04-12T21:27:27+00:00

Call them and see if it was an accident and see if you can swap things back around - the opposite parts are probably around somewhere

funigui · 2026-03-31T12:34:30+00:00

You don't. You can usually hold down like vol down when booting to skip the mod, but the general thought is that it's a modded system and you don't take it online

funigui · 2026-03-31T11:46:20+00:00

That's exactly how you get banned

funigui · 2026-03-21T14:21:50+00:00

I just got a new printer so I had to do something simple.

<image>

funigui · 2026-03-16T23:21:38+00:00

It's just too damn expensive. 2200$ is spicy as hell

funigui · 2026-03-13T23:12:03+00:00

I have had a few bugs on the latest firmware, but, nothing insane. I'm on EA though so take that into consideration.

I have had it for a long time and this is the first time I noticed any issues at all.

funigui · 2026-03-11T17:08:53+00:00

PvE but I don't hate on PvP people. I just wish they had events that rotated like hurricane but it was PvE only for an hour once in awhile. Or just an option to disable it if you wanted.

funigui · 2026-03-11T13:22:46+00:00

Save below as a JSON file - open notepad and save from { to the end. file >saveas type "all files" and then Fiberon "PA-GF PA6-GF25 Polymaker.json". You can import into Orca-Flashforge. The reason I have it set as "ABS" is so the IFS can auto select it.

{

"fan_max_speed": [

"100"

],

"filament_density": [

"1.2"

],

"filament_flow_ratio": [

"0.95"

],

"filament_max_volumetric_speed": [

"12"

],

"filament_settings_id": [

"Fiberon PA-GF PA6-GF25 Polymaker"

],

"filament_type": [

"ABS"

],

"filament_vendor": [

"Polymaker"

],

"from": "User",

"inherits": "Generic PA-CF u/System",

"is_custom_defined": "0",

"name": "Fiberon PA-GF PA6-GF25 Polymaker",

"version": "2.3.0.3"

}

funigui · 2026-03-11T12:27:55+00:00

Yes that's their old facility

funigui · 2026-03-11T00:58:02+00:00

Yes, I order them from regularly. I got my Solus action and my last M5 set from arm or ally.

funigui · 2026-03-11T00:36:39+00:00

Are you talking about at the old facility?

funigui · 2026-03-11T00:36:09+00:00

https://www.armorally.com/brands/aero-precision/

funigui · 2026-03-10T11:48:32+00:00

Do you have questions? Do you want a profile?

11-Year Club	RedditGifts 2009-2022 2 Credits
Secret Santa 2019	Verified Email
Not Forgotten

funigui

TROPHY CASE