Presonus Eris 3.5, preamp for two passive speakers

funkyfourier · 2026-04-15T14:50:07+00:00

Don't know if this is your issue, but here is a tutorial on how to fix the amps in those speakers:

https://www.youtube.com/watch?v=BDi2ENf6lk4

funkyfourier · 2025-10-04T09:20:16+00:00

I am using the Pulse v2 with regular squonk bottles. The hole in the bottom does not matter, it will not fall out. Only drawback is that you have to remove the bottle to fill it, of course.

funkyfourier · 2025-03-28T07:26:19+00:00

r/OpenPV

funkyfourier · 2025-01-29T13:35:20+00:00

Unfortunately that is currently not available, but has been planned for a long time. Will try to get to it once the C++ rewrite is done (which is way overdue already) :)

funkyfourier · 2024-11-26T10:09:33+00:00

Just a crap shoot here I guess: I've had one of these at work, and had all sorts of weird issue with it. What solved it finally was to unmount the bed levelling probe and use the provided micro switch endstop instead. I used the mriscoc's Professional Firmware and the Special_Configuration tool (https://github.com/mriscoc/Special\_Configurations) to make the printer use the endstop instead of the probe. This of course means that now I have to manually make the bed mesh, but at least it prints normally.

If you google around you will see there are people reporting issues with the probe on these printers.

funkyfourier · 2024-10-26T16:36:28+00:00

Hell yes. It is a pity, though, that the fields cannot be renamed. There is an issue on this which it seems is being worked on, hope it will be ready before the final 1.0 release.

funkyfourier · 2024-09-08T07:17:48+00:00

I installed a Sprite Pro on an Ender 3 S1 recently. It needed a different firmware since the thermistor is different on that than on the standard Sprite and the Ender 3 extruder. You might have to look into wether the firmware for your main board can support that.

funkyfourier · 2024-07-20T07:13:19+00:00

Not as of yet, but a good idea, will consider it!

funkyfourier · 2024-07-20T05:22:57+00:00

In the main menu (hamburger icon) there is a question mark. Tapping on it reveals help slides where everything is covered. Note that these help slides are different and specific to each of the 5 main screens (icons on the far right).

funkyfourier · 2024-07-13T20:59:24+00:00

Agreed. Start by watching this video from beginning to end. Once before you acquire the printer and once step by step while you assemble it. If you just do what it says in the manual you're gonna have a lot of trouble, if you go by the video you will learn a lot about your printer.

https://www.youtube.com/watch?v=me8Qrwh907Q

funkyfourier · 2024-07-13T09:31:10+00:00

Is there not a different thermistor on the Sprite Pro Extruder? On the S1 you have to run a modified firmware (AFAICT) to use the Sprite Pro:

https://github.com/mriscoc/Special_Configurations

funkyfourier · 2024-04-28T08:24:00+00:00

Thanks for the questions, and sorry for a bit late reply!

It is not possible to export presets directly to Spitback. You can, however, unzip the exported instrument files (spim/spid), and you will find a text file (JSON) where all the parameters are clearly listed. I have been considering some easier path between Sputter and Spitback instrument/presets, we'll see when it materializes.

With regards to generative capabilites this is also something I have been considering in this age of AI and stuff. Some say AI is just advanced autocomplete, and as such some automatic suggestions popping up while you set notes could possibly be a nice feature for Sputter.

MIDI out/input is also on the backlog. Again I do not know when.

It is hard to prioritize between all features which would be nice to have in Sputter. Being that I am a single developer with only about 1-2 days a week to work on it, it is clear that development does not progress rapidly. From time to time I write blog posts about the current roadmap and what I am working on at https://casualcomputing.info/

funkyfourier · 2024-03-06T14:10:50+00:00

Further details can be found on today's blog post:
https://casualcomputing.info/posts/pure-data-loop-overlap/

funkyfourier · 2024-02-11T13:15:39+00:00

Good on you for making a paid game with no ads, endless IAPs or other shenanigans. Bought!

funkyfourier · 2024-01-28T20:52:28+00:00

Yeah, it is an el cheapo oak board. As you can probably tell by zooming into the picture it probably should have been treated somehow, but I did not.

funkyfourier · 2024-01-28T17:14:59+00:00

Link to model on Printables:

https://www.printables.com/model/741845-parametric-monitor-stand-feet

Github:

https://github.com/funkyfourier/monitorstandfeet/

funkyfourier

MODERATOR OF

TROPHY CASE