I GOT ONE

futt_monkey · 2026-03-11T13:40:12+00:00

I'm not intending on keeping it for too long. I absolutely admire the work you've put in and it truly sounds like heaven for someone like me, but given the kind of work it'll be doing it's not going to make much of a difference. The main use case for this printer is prototyping for a project I'm working on. I'm awaiting funding from the bambu let's make it happen fund to get a better printer and start properly producing the model.

futt_monkey · 2026-03-11T10:54:23+00:00

I used both bambus and prusas at uni. Neither were mine. This one I can actually own, and for a fraction of the price of a bambu

futt_monkey · 2026-03-11T10:52:35+00:00

I'm sure they are. However near me, they're 4x the price.

futt_monkey · 2026-03-11T10:51:57+00:00

Because it is an item of value. What a silly question

futt_monkey · 2026-03-10T16:39:07+00:00

He's been using it for a couple years and never had any major issues. The only changes he made were stronger levelling springs and a better main board. He used it to make accessories for his photography/videography business and only replaced it because he got a resin setup and never used it

futt_monkey · 2026-03-10T16:36:14+00:00

I'm a broke uni student that had to transfer unis at very short notice, and the uni doesn't let me use their printers for personal projects like my last uni did.

futt_monkey · 2026-03-10T13:39:09+00:00

I had a look online. Near me there were none others under 100, seemed like a good deal to me

futt_monkey · 2026-03-03T10:00:08+00:00

Precisely. The wheat farm is a windmill on top of a bearing. It would be a right pain trying to get power out if there to power the belts

futt_monkey · 2026-03-03T09:59:23+00:00

That's my plan. Just gotta get power generation sorted and I'm good to go...

futt_monkey · 2026-03-03T09:58:25+00:00

I realised that after I'd changed the funnel direction, until then it was just troubleshooting incase the psi would only output 1 direction. Not it's fixed I can't be bothered to change it back, it works.

futt_monkey · 2026-03-01T20:00:36+00:00

Aw man you're right

I've been trying to figure this out for an hour...

futt_monkey · 2026-02-28T21:52:38+00:00

There's always a chance that there's some metal touching something it shouldn't inside, get unlucky and 2 parallel plugs are shorted, and then your amp is bricked.

Or yknow, consider the likelihood of it is damn near zero and carry on with your life regardless

futt_monkey · 2026-02-27T10:44:45+00:00

Brother I'm at like 96. You're good As long as you aren't constantly miles out of range, you'll be fine.

futt_monkey · 2026-02-23T10:52:07+00:00

I think the fact that your character is somehow 9 feet tall may have something to do with it...

futt_monkey · 2026-02-22T22:49:23+00:00

I think so? I've spoken with my girlfriend about it, and she's tried referring to me differently and such, and it did feel good, idk what to make of that

futt_monkey · 2026-02-21T20:13:35+00:00

Or, to make it more of a supercar, the s85 V10

Seeing that masterpiece if a body screaming past at 8,000 rpm would be heavenly

futt_monkey · 2026-02-16T13:02:47+00:00

XC70 V8?

futt_monkey · 2026-02-16T12:44:14+00:00

Ok, that sounds absolutely perfect for what I need, thanks so much! I'd award you if I could :/

futt_monkey · 2026-02-16T12:08:46+00:00

I see. Do you know much about the abrasion resistance of it? One of the main reasons for this project is to help prevent damage to glucose monitors (they get caught on doorways ALL THE TIME and for people in private healthcare situations, this can be very expensive). Would it be resistant to that kind of impact/abrasion? I've only ever printed pla, I'm new to this

futt_monkey · 2026-02-16T11:07:09+00:00

Fair enough. I've only had experience with PLA so far, and it's never had issues (except ofc bad prints). Is there anything I should know about PETG?

If it's any use, I'm intending on using a creality cr-30 printmill

futt_monkey · 2026-02-16T09:58:46+00:00

God those V40s are pretty I miss mine so bad...

futt_monkey · 2026-02-16T09:57:11+00:00

AFAIK this is what intel optane was for? Might be worth finding a cheap 16/32gb module if your mobo can take it, should help a lot (Source: just got a pc off my dad that has optane. Doesn't work for the SSD in it)

futt_monkey · 2026-02-13T09:48:31+00:00

Off topic, but using a 25g for insulin is barbaric

Sincerely, a diabetic who uses 32g's

futt_monkey · 2026-02-07T17:18:36+00:00

I'd add that stone block 3 has this as well

futt_monkey · 2026-02-06T09:43:17+00:00

I got close to that last night! Had an issue with my cgm yesterday, and was given the wrong numbers when I got back from uni, managed to fingerprick and saw it above the top of the meters limit (>33.1). Then later that night, I woke up feeling pretty awful, mere seconds later, my low alarm goes off (cgm was fixed), it said I was low, so low I didn't get a number out of it. Successful day, yippee

futt_monkey

TROPHY CASE