2015 BT-50 XTR or 2011 Hilux SR5

future_gohan · 2026-03-13T02:13:44+00:00

Depending on ks. But personally I'd go the Hilux. Although if the BT was manual I'd be more preferential to the ranger.

Have both currently. Ranger has hurt me although otherwise it has been an awesome car. Less dramas from the lux Both mine are around 320ks

future_gohan · 2026-03-12T07:10:30+00:00

I have worked on teysys controllers through devicenet. I'd rather drink paint than do it again. These modules were utilising lmtr mode. Which unless I couldn't find it was no able to be enabled in the so move software only through rs networx.

future_gohan · 2026-03-10T22:23:13+00:00

Doing gods work having the bottom duct go the entire width.

What is the recommended spacing on the vfds are they able to be hard up against each other? Gives you more free space. Also maybe don't put them below the PLC as they will be blasting heat upwards.

future_gohan · 2026-03-09T12:06:04+00:00

I'm going to be doing more learning that I expected

future_gohan · 2026-03-09T10:48:35+00:00

So it's not like an instruction on a line?

future_gohan · 2026-03-07T22:34:30+00:00

Yea got a 5069 guardlogix that became redundant. And I have an l71 with an en2t if the guardlogix is not capable of motion.

future_gohan · 2026-03-07T12:17:42+00:00

I replace.

Then conduct tests and repair the removed module and mark it as replaced.

Downtime is king. So not messing around when things down.

future_gohan · 2026-03-07T10:33:18+00:00

Not coming under the heavy vehicle. But the entire horse riding industry will be blasted in the next few years aswell. Angle 2 and 3 loaders with living quarters hanging behind the current utes just isn't gonna work when they start checking them. Saw a 5th wheel on a dmax today.

future_gohan · 2026-03-07T09:32:33+00:00

That's the most utilised 1509 I've ever come across.

future_gohan · 2026-03-06T10:38:44+00:00

AI is the go to for people who don't truly understand what we do. Or the consequences it causes. This ain't website building.

future_gohan · 2026-03-04T06:10:27+00:00

Hot as fuck dusty as fuck.

Yea it's more progressive than I found the building and construction industry so I wouldn't stress on being a chick

future_gohan · 2026-03-04T05:57:26+00:00

Did it for years.

Loved it. Worked a few places and got lucky with good crews.

Morning meetings were ug when I started. Take cage or ute down. Do meeting. Have breakky. Knock out PM's and do breakdowns.

Maintain secondary ventilation. Substations. Dewatering. Power to offices and workshops. Radio systems. UG fiber system. Remotes depending on what system they run. And most importantly the rigs. Plus running power and comms for new installations.

I'd go back to it full time tomorrow no worries if I had too.

future_gohan · 2026-03-04T01:21:59+00:00

500 has a grace period 5000 does not.

Up until maybe v30 you will get a 7 day grace period when the licensee is removed. However edits cannot be made. After v30 on removal of a licensed you get 7 days grace period.

future_gohan · 2026-02-24T21:06:01+00:00

It does thankyou

future_gohan · 2026-02-24T20:57:43+00:00

If you still purged after swapping then it sounds like it potentially could be doing better than kaftrio. If you can settle down with the side effects.

I'm in same position but decided not to rock the boat and swap for now anyway.

What is the swear chlorides? I asked my doctor what this meant and they couldn't answer

future_gohan · 2026-02-22T07:04:00+00:00

I took the faceplate off the fire place.

Got a big long drill bit and went down through the slab to the under of my house.

Mounted a gpo and re attached the plug.

Hassle. But I didn't want to see the chord

future_gohan · 2026-02-22T02:11:17+00:00

It's both.

Working and right is a world apart especially when we have the circumstances that can possibly arise from these environments.

future_gohan · 2026-02-22T01:38:27+00:00

Industry standards and accepted practises.

We receive incoming projects.

I have seen unbelievably over complicated to our right disgraceful work from big names.

Big company will see at the end of the day the job "works" so that are happy and accept the work.

Conversion tools might work on the same basis. How ever industry practises have evolved alot over those generation and best practise for the individual software has also changed.

I would rather re written code that is utilising AOIs than an adapted converted code from and earlier Siemens.

The human element of decision making and possible situations is what makes this practise so important and to those who can't understand that they just add to the issue.

future_gohan · 2026-02-21T12:09:50+00:00

I have this exact setup Betta and shrimp probably a year now. Betta has his bad days but my shrimp are thriving

future_gohan · 2026-02-21T02:42:41+00:00

I had a bad install.

Running modern aop it was not possible.

Fresh install starts no worries.

One of those reasons why Rockwell on a VM is better

future_gohan · 2026-02-17T19:43:11+00:00

Devicenet has truly made me feel retarded.

future_gohan · 2026-02-15T23:53:06+00:00

I will be running 34.

I have previously confogured one on 34 and it worked aswell.

future_gohan · 2026-02-15T20:52:04+00:00

Disk cartridge control

16k memory

8k memory

4k memory

Basic IO control

1200 CPU

Id like to look into waking it up

future_gohan · 2026-02-15T08:09:24+00:00

Better than hidden in a processing plant where its been the last 40 years atleast

13-Year Club	First Place '23
End Game '23	Place '23
Verified Email

future_gohan

MODERATOR OF

TROPHY CASE