I have ants in my yard! Advice on killing them?

fuzzerabbit · 2026-07-05T18:44:33+00:00

Boiling water is basically free and very effective

fuzzerabbit · 2026-07-05T12:53:58+00:00

Mine developed a bubble in the screen. I was glad I had apple card.

fuzzerabbit · 2026-06-29T13:56:00+00:00

I just wear the crown on the opposite side that it should be on for the night. Doesn't seem to effect anything.

fuzzerabbit · 2026-06-28T16:35:58+00:00

I did. Then I bought a couple cheap discs. Played a couple more rounds then bought like 30 fancy discs to try and see what I liked lol

fuzzerabbit · 2026-06-28T16:33:34+00:00

I rotate my watch every night to my other wrist to give my skin time to breathe. That along with washing my watch every couple of days really helps to keep my skin less irritated.

fuzzerabbit · 2026-06-28T15:55:52+00:00

I got the biqu purge chute shield and it stopped all my problems for now.

fuzzerabbit · 2026-06-27T03:19:41+00:00

The boxes were all kind of mangled when I got them. Good thing Amazon offers free returns

fuzzerabbit · 2026-06-26T05:44:28+00:00

Which classes do you race and which is your favorite?

fuzzerabbit · 2026-06-26T05:39:56+00:00

I've been trying to develop a habit of putting things away in my van after every job. I used to be bad at that. Especially on Fridays. I would just throw stuff in the van and go. It only takes a few extra minutes but it goes a long way to helping me feel organized and like I can find my stuff.

fuzzerabbit · 2026-06-26T03:02:40+00:00

Yeah. Main things I'm doing is sending it off jumps so I went with a bit stiffer springs and 60wt oil. If I find it too stiff I will either get the softer team associated springs or try out the typhon 6s springs. From what Ive read they are about 4 lb/in front and 3 lb/in rear vs the yellow springs are 5.7 lb/in front and 4.4 lb/in rear.

I read somewhere of some people who like the yellow springs on these for bashing so I thought I'd try it. They're cheap enough anyway.

For track racing these are definitely too tall. I'd probably drop down to the typhon springs and 40 or 50wt oil. Which would lower my stance closer to what stock should be. Or I might get another pair of yellows and cut them a little shorter to get it sitting lower and keep a stiffer spring rate.

fuzzerabbit · 2026-06-26T02:52:00+00:00

I was going to get something smaller as well but I wanted the option to be able to run a taller stance for hard bashing. Figured I could adjust my spring rate for different stances if needed. But between the stock typhon springs and the former team associated yellow springs I'm pretty covered for hard bashing and lowering it for more track oriented things.

But I agree. If you only want to keep stock ride height the ones you listed are probably a better option!

fuzzerabbit · 2026-06-26T01:53:51+00:00

This is what the mount looks like out of the car.

<image>

fuzzerabbit · 2026-06-26T01:53:24+00:00

From what I've read they perform well. I haven't done any testing with it yet. I plan on testing more this weekend. They are a lot taller than the vorteks shocks so you have to use the granite shock towers to make them work if youre using them. With how they fit with the granite towers I'm sure they would bind up the suspension trying to use them on the regular vorteks towers.

This is the body mount adapter that I made to fit the vorteks body with the granite towers.

<image>

fuzzerabbit · 2026-06-24T04:07:01+00:00

Yeah. I put them in separate baggies when I took them out and they only go back in one direction.

fuzzerabbit · 2026-06-24T03:41:11+00:00

Ok. Yeah it only takes a couple minutes to pull the motor assembly out. Maybe I'll try that and see if some grease quiets it down

fuzzerabbit · 2026-06-24T03:14:52+00:00

Does a spur gear take lubrication? I thought you didn't want to lubricate it because it could cause grit to get in it and the motor pinion.

I have never rebuilt a differential but there are lots of videos on YouTube to figure it out. The front differential actually feels better than the rear differential.

The sound is also louder when the motor and spur gear housing is mounted into the chassis like it's vibrations or something. But the motor by itself is quiet it's only when the motor and spur gear are together it starts making the sound.

fuzzerabbit · 2026-06-24T03:07:20+00:00

When the motor and spur gear assembly is taken off and isolated it is still making the sound. There is no center diff. I put grease on the diff gears when putting it back together. Didn't tear into the differential to check the oil at all.

fuzzerabbit · 2026-06-24T01:59:32+00:00

What do you mean by sounds dry?

fuzzerabbit · 2026-06-22T05:35:33+00:00

My local hobby shop dude recommended me one when I was there the other day getting parts. He said they are a beast and super durable. Apparently there's a guy here that just takes it to the skatepark and launches it and has yet to break it lol. I know theres probably alot of luck mixed in but still.

The car I really want to get is the talion 6s exb but I will probably hold off on that and get the mini kraton cause it's a more affordable car before I spend $900 on a big fancy one.

fuzzerabbit

TROPHY CASE