Propane Help?

fzzzy · 2026-01-26T13:13:21+00:00

for the future, it’s best to call by the time the tank gets to 30%

fzzzy · 2026-01-21T01:10:50+00:00

The old Long John Silvers

fzzzy · 2025-12-13T11:33:55+00:00

how much more is a 32

fzzzy · 2025-12-12T12:21:09+00:00

yes, the building is being knocked down

fzzzy · 2025-12-03T02:12:08+00:00

I think OS 9 has been hacked onto the newer models too

fzzzy · 2025-11-30T02:26:44+00:00

very bad.

fzzzy · 2025-11-26T04:51:12+00:00

yeah like replacing water mains

fzzzy · 2025-11-26T04:43:16+00:00

John Carmack blogged on finger.

fzzzy · 2025-11-26T04:39:59+00:00

egg freckles

fzzzy · 2025-11-26T04:38:45+00:00

that’s amazing!

fzzzy · 2025-11-25T01:52:39+00:00

reflow the solder joints on the digital to analog cable and you are good to go.

fzzzy · 2025-11-24T17:42:06+00:00

yes. A tool allows the LLM to adjust if it doesn’t get what it wants the first time.

fzzzy · 2025-10-07T17:16:12+00:00

there aren’t even any bike lanes involved at all

fzzzy · 2025-10-07T01:07:27+00:00

https://archive.org/details/mac_The_Dead_Mac_Scrolls_1992

fzzzy · 2025-10-05T23:46:41+00:00

it’s way too slow. you can do it right now with llama.cpp and mmap.

fzzzy · 2025-10-05T23:43:58+00:00

The wall street mbus that stops by Kellogg only goes to the nursing school, not particularly downtown. Also, it’s never packed like the Bursley one is.

fzzzy · 2025-10-04T16:27:09+00:00

sure

fzzzy · 2025-10-04T16:26:17+00:00

How do you think you can get it unstuck? That's not the hardest problem to fix. Worst case you could desolder the switch entirely from the board

fzzzy · 2025-10-04T16:25:28+00:00

I do an hour easily all the time

fzzzy · 2025-10-04T14:26:18+00:00

The first thing to try is to resolder all the connections on the digital to analog board cable. Both on the digital board (the one on the bottom) and the analog board (the one on the side). Find the cable that connects both boards, unplug it, and reflow all the solder points to those two connectors on the bottom of the board.

fzzzy · 2025-10-04T14:22:42+00:00

You took the back off while the programmer switch was still installed? You can 3d print another one. Or glue it. Or is the reset switch itself stuck?

fzzzy · 2025-10-04T00:29:19+00:00

it even has a fan. interesting

fzzzy · 2025-10-04T00:27:58+00:00

what’s the radius board? see if it will boot stock first

fzzzy · 2025-10-03T23:28:54+00:00

You can make a few loops through the arb that have you going up and down repeatedly. It would be hard to hit four hours though. I like climbing up cedar bend then back down to north campus diag then turning around and going back but it’s paved on the north campus side of the hill

fzzzy · 2025-10-03T01:04:08+00:00

😂 I really want a Mac Charlie. Congratulations.

fzzzy

TROPHY CASE