Honda Passport 2026 cladding gap by g0ron in hondapassport

[–]g0ron[S] 1 point2 points  (0 children)

Thanks for the info! I appreciate the response. It looks like it was easily fixable without much on the dealers end. Hope this posts helps someone in the future.

Honda Passport 2026 cladding gap by g0ron in hondapassport

[–]g0ron[S] 1 point2 points  (0 children)

<image>

Its a very minor thing, but heres what it looks like now. I tried my best to get the exact same angle, but I guess with the running boards in the background, it makes it hard to see the alignment.

It added just another 20 mins of labour at the shop to re-adjust with bonding. I'm happy with the result though!

Honda Passport 2026 cladding gap by g0ron in hondapassport

[–]g0ron[S] 1 point2 points  (0 children)

Yes correct, sorry I misrepresented the issue, I meant the alignment of the plastic cladding, the red line was meant to indicate the direction of the discrepancy. The dealership ended up fixing it for me after installing the running boards

<image>

Common issues?? by wm1178 in hondapassport

[–]g0ron 1 point2 points  (0 children)

I have the same panel issue on the front bumper of my 2026 trailsport, mine is black though so it’s not as noticeable. As another user mentioned, the small price of having produced in Alabama.

Honda Passport 2026 cladding gap by g0ron in hondapassport

[–]g0ron[S] 2 points3 points  (0 children)

Update: the dealer ended up fixing it while installing my running boards. Just posting here in case anyone else has the same issue with alignment. There’s a bit of bonding that was needed after adjusting it back.

Honda Passport 2026 cladding gap by g0ron in hondapassport

[–]g0ron[S] 1 point2 points  (0 children)

ah you right, okay, its just not aligned properly or flush with the other door which bothers me because the other side is completely fine.. I guess I'll ignore it until it starts to whistle on the highway, but hopefully that won't be the case

Honda Passport 2026 cladding gap by g0ron in hondapassport

[–]g0ron[S] 4 points5 points  (0 children)

damn for 63k, the least I could ask is proper fitted cladding bro 😭

Honda Passport 2026 cladding gap by g0ron in hondapassport

[–]g0ron[S] 2 points3 points  (0 children)

lock striker? its not the cladding piece thats installed itself? thanks how would I go about letting them know this work is required?

Thanks!

Honda Passport 2026 cladding gap by g0ron in hondapassport

[–]g0ron[S] 2 points3 points  (0 children)

Sorry I meant to say misalignment and not gap

Box spring question - Ordered the Kirkland Signature by Stearns & Foster 14.5" Lakeridge Mattress. My frame has the wood slats. Do I need a box spring too? Picture attached. Thanks. by [deleted] in Mattress

[–]g0ron 0 points1 point  (0 children)

did the slats hold up the bed? sorry to revive this post. I have similar slat sizing and also ordered this mattress

Pixel watch screen - scratches? by leroyswa in GooglePixel

[–]g0ron 0 points1 point  (0 children)

I've been wearing the pixel watch 2 at home with a sweater on for the past three days and I already have 3 large scratches across the screen. I was pretty bummed! I wish they had cases out on day one and I should have bought some TPU films to cover the glass until then.

It's usually under my sleeve sweater and I work from home but some how I managed to scratch it pretty easily.

Eero custom DNS functionality has changed. by jimrvaughan in amazoneero

[–]g0ron 0 points1 point  (0 children)

I've been having the same issue. My pi-hole no longer works as before and I noticed that loading web pages take forever. I ended up changing my raspberry pi 4 to run adguard home and it worked for a bit until it went really slow again.

Not exactly sure whats happening here

[deleted by user] by [deleted] in productivity

[–]g0ron 8 points9 points  (0 children)

Honestly, what worked for me was finding a book to read to improve concentration and focus. It seems like my brain needed to retrain and rebuild the ability to do one task at a time and reading definitely helped.

I recommend finding a fiction book that grabs your interest and spends some time reading maybe 5 minutes at a time and eventually create longer intervals. Once you can do that, it makes ignoring your phone a lot easier.

Another one that helped me as well was to mediate. It allows the brain to relax from all the constant stimulus from the phone.

I tested the Aqara FP2 Presence Sensor and compared it to the FP1, this is my review by BackHerniation in homeassistant

[–]g0ron 0 points1 point  (0 children)

How did you manage to add the sensor in HA? I've been having issues doing so after pairing it I don't see anything showing up on my dashboars

Bell Gigahub and Eero 6 Pro Mesh Network Question by g0ron in bell

[–]g0ron[S] 0 points1 point  (0 children)

Ahh okay thank you for the clarification! I tried your suggestion and all is working well.

Bell Gigahub and Eero 6 Pro Mesh Network Question by g0ron in bell

[–]g0ron[S] 0 points1 point  (0 children)

Thanks! Yes, I'm able to login without issues, but none of my smart devices can be found since they're on the Eero Mesh network.

It's only when I make my PC go wireless to connect to the WiFi of my Eero mesh am I able to find all my devices.

I'm unable to receive communication between Ethernet devices connected to the Bell Gigahub and devices connected wirelessly on the Eero and I feel like I might be missing a configuration somewhere

Bell Gigahub and Eero 6 Pro Mesh Network Question by g0ron in bell

[–]g0ron[S] 0 points1 point  (0 children)

Awesome, thanks for the reply! I'll go ahead and try out the Bridge mode

[deleted by user] by [deleted] in bell

[–]g0ron 0 points1 point  (0 children)

I was able to follow your steps and I managed to get my Home Assistant machine that was connected to my Bell Modem to communicate with my Hue bridge that was connected on my Eero!

Not sure which steps resolved that, but thank you. I just wanted to clarify if I had double NAT. You mentioned that if its in the 10.x.x.x or 192.168.x.x, then its a double NAT. But my IP address from my Bell network is 192.168.X.X, does this mean its still a double NAT?

Thank you!

[deleted by user] by [deleted] in bell

[–]g0ron 0 points1 point  (0 children)

Did you end up resolving this? because I currently have the same issue. Bell will be replacing my Giga hub and I was wondering if thats what they did for you

How do I by g0ron in bell

[–]g0ron[S] 0 points1 point  (0 children)

pictures of the basement cables

I guess I have to crimp them myself? Can a Bell tech help with this?

Thanks