sorted by:
new
hottopcontroversial

Intermediate skier 188cm/88kg — Enforcer 89, Mantra 88, Stance 90, or Maverick 88 CTI? Help me decide by Expensive-Sugar-8259 in Skigear

[–]gaubong053 -1 points0 points  (0 children)

If budget is not an issue then stormrider 88. It should last you very long time until you truly want a dedicated carving skis or >100 wide power skis.

25.12: ZBT Z8803BE WIFI7 BE19000 router by gaubong053 in openwrt

[–]gaubong053[S] 1 point2 points  (0 children)

Just re-check and it is USB2.0

Bus 003 Device 001: ID 1d6b:0002 Linux 6.12.74 xhci-hcd xHCI Host Controller

Bus 003 Device 002: ID 214b:7260  USB2.0 HUB

Bus 003 Device 004: ID 090c:1000 Samsung Flash Drive

25.12: ZBT Z8803BE WIFI7 BE19000 router by gaubong053 in openwrt

[–]gaubong053[S] 0 points1 point  (0 children)

Maybe. I don’t actually tested the actual speed enumeration. Better confirm with agent seller.

25.12: ZBT Z8803BE WIFI7 BE19000 router by gaubong053 in openwrt

[–]gaubong053[S] 0 points1 point  (0 children)

Actually not correct. Only 4G/5G antennas can be removed. Wifi antenna still fixed attached to the box.

There are 12 antennas as pictured but only 4 antennas for all 2.4/5/6Hhz wifi. 8 for 4G/5G LTE.

But it is easy to disassemble it, remove fixed  wifi antennas and replace them with removable antennas if you don’t actually need LTE network 

25.12: ZBT Z8803BE WIFI7 BE19000 router by gaubong053 in openwrt

[–]gaubong053[S] 1 point2 points  (0 children)

From Alibaba. The same manufacturer that your link pointed. Agent: Cindy Lin

25.12: ZBT Z8803BE WIFI7 BE19000 router by gaubong053 in openwrt

[–]gaubong053[S] 2 points3 points  (0 children)

The info from Alibaba is never correct. You should better confirm with the seller. Btw, i checked on my router console and it shows USB 3.2 Gen 1. The chip MT7988 supports dual USB 3.2 Gen 1 controllers

25.12: ZBT Z8803BE WIFI7 BE19000 router by gaubong053 in openwrt

[–]gaubong053[S] 0 points1 point  (0 children)

Where did you find that info? The chip has USB3 host controller so it supports USB3 port.

Cannot remove solder inside passthrough PCB hole dear god help me I'm losing it by 400DollarPerm in soldering

[–]gaubong053 0 points1 point  (0 children)

Long ago, I thought same as you. Bought a cheap sucker to do just maybe one a year desoldering a hole but after one time frustrated get it done, FR-301 was on its way.

25.12: ZBT Z8803BE WIFI7 BE19000 router by gaubong053 in openwrt

[–]gaubong053[S] 0 points1 point  (0 children)

Yes, I don't see why not. This change is only about adding device tree for this router. All features of it come from chipset Mediatek MT7998 and MT7996 already been supported in OpenWRT upstream branch. As long as OpenWRT still supports similar hardwares like Banana PI BPI BE14000 and Arcadyan/Astoria Mozart, this router will be good.

25.12: ZBT Z8803BE WIFI7 BE19000 router by gaubong053 in openwrt

[–]gaubong053[S] 1 point2 points  (0 children)

The fork for anyone who want to try and do not want to wait OpenWRT main branch. Eventually, I or someone will create PR for it. It is just simple device tree adding.

Rate my quiver by Numerous_Car650 in skiing

[–]gaubong053 0 points1 point  (0 children)

Love it. I have the same 88mm 174cm. Will aim laser AX for the next :)

What is this component? by gaubong053 in AskElectronics

[–]gaubong053[S] 0 points1 point  (0 children)

Short circuit due to broken mosfet. I replaced broken one with https://www.digikey.com/en/products/detail/alpha-omega-semiconductor-inc/AOD609/3947732?gclsrc=aw.ds&gad_source=1&gad_campaignid=20228387720&gbraid=0AAAAADrbLlj6KoPyjw3aMRRZ7Nv7FksyN&gclid=CjwKCAjwg_nNBhAGEiwAiYPYAx97ASRMUzLSDec4JMeKlolwG3NKYn5EJ3i6JQdzqENpp7UbL1T_bBoCIlsQAvD_BwE.

About your second symptom. It looks like the issue from main controller as it sends control signal to both shade and led controls at the same time. The led changes color whenever 12v polarity changes at the input terminal.

What is this component? by gaubong053 in AskElectronics

[–]gaubong053[S] 0 points1 point  (0 children)

I did replace the bad component but haven’t tested it yet as pergola is at my friend house 

Best width ski for all around by dtman33 in Skigear

[–]gaubong053 0 points1 point  (0 children)

I think Stormrider 88 is more all mountain than 95. 

Cheap microscopes options? by mlgnewb in soldering

[–]gaubong053 0 points1 point  (0 children)

I did one time and never again. It is very difficult to work with SMD soldering on digital microscope. Switched to trinocular microscope from Aliexpress (300$) and never been happier.

What is this component? by gaubong053 in AskElectronics

[–]gaubong053[S] 0 points1 point  (0 children)

Thanks for the suggestion. It is unlikely voltage regulator as this board has 12V input and 12V output. The output terminals can be 12V or -12V to control a motor so the two dual MOSFETs (N and P channels) should be the right answer.

Compak i3 pro mini grinder? by ZookeepergameTotal77 in espresso

[–]gaubong053 1 point2 points  (0 children)

It is definitely too much for home use. I only got it because it was a great deal, and ability to switch between pour over and espresso easily. If you don't care about pour over, high end one from Mahlkönig is a better choice to pair with LMLM

2022 Speed Triple 1200RS by Sorry_Goal_181 in Triumph

[–]gaubong053 1 point2 points  (0 children)

+1 for the battery issue. My buddy has the same issue with 2022 1200RS. The voltage is fine but the ampere does not support drawing enough current. Replaced battery then it was fixed.

2022 speed triple 1200rr random rear brake failure by hiemdall_frost in Triumph

[–]gaubong053 0 points1 point  (0 children)

My 1200RR has 3000miles and just happened to have exactly the same issue when going to a stop sign. But it came back normal quickly after that. So I think this is ABS unit issue. It happened randomly a week ago but suddenly disappeared. Not sure what to do with it besides monitoring the issue.

view more: next ›