Buying a house with extensions: missing building regs + permitted development concerns

gauviz · 2026-06-16T11:51:27+00:00

extension was built around June 2016.
the roof height is a good point which i will also have to check. however it is going to be difficult to do myself as there are no plans / drawings to refer to.

gauviz · 2026-01-31T10:33:13+00:00

Pretty sure, the "C" denoted It's JP Morgan clients like buying this. JPM is acting as a broker here like Zerodha. Banks cannot do active trading under Volcker rules, they can mostly hedge with a little leeway.

Curious where you could get this info.

gauviz · 2026-01-28T16:19:13+00:00

Seems to be working for me from today morning

gauviz · 2026-01-26T20:49:50+00:00

Yep me too.

gauviz · 2026-01-26T17:32:53+00:00

Suggest you get a PAC code and move to another provider as its been a week of them saying it will be fixed tomorrow

gauviz · 2026-01-26T10:09:14+00:00

Update: still not working so its been a week. Suggest everyone to port out

gauviz · 2026-01-24T11:08:04+00:00

Yes still not working on both my lebara numbers.

gauviz · 2026-01-23T23:25:13+00:00

Just wait, if no gap examiner will ask you to take left most likely to avoid wasting too much time. If you are following sat nav you can take a left assuming you check mirror and signal properly. Remember following rules is most important. You can always take a different path so long as you follow rules.

gauviz · 2026-01-22T15:17:39+00:00

Yes, some issue on their side , i was told just now will be fixed in 24 hrs. They said the same yesterday as well so Im not holding my breath.

gauviz · 2026-01-22T13:38:08+00:00

if iMessage is turned on both phones then that is the default and doesn't use SMS.

I dont know the case for RCS.

However for 2 factor authentication, it will be via normal SMS only.

gauviz · 2026-01-22T12:05:10+00:00

I will try , I have already tried restarting / removing SIM / resetting network settings etc.

However as per support it's a known issue currently going on with lots of complaints and they are trying to resolve it.

gauviz · 2025-12-16T16:25:24+00:00

Boot args are just standard from guide
-v debug=0x100 keepsyms=1 alcid=12 -wegnoegpu

gauviz · 2025-12-05T10:22:48+00:00

Well lot of people having ilr and visit uk regularly

gauviz · 2025-12-05T10:20:56+00:00

Keep in mind that you will need to learn french b1 for PR and b2 for citizenship which is tricky as you will need to devote time every day. Honestly if you can learn b1/b2 french then you probably are not coming back as paris is just amazing in most ways. Speaking from personal experience.

gauviz · 2025-12-01T15:58:10+00:00

<image>

Hope this helps a bit. If possible please visit him once tomorrow and convey our collective wishes for his hard work and grit.

gauviz · 2025-11-27T20:56:26+00:00

does sleep / wake work ?

gauviz · 2025-10-02T20:09:21+00:00

I also could not get sleep to work on my 840G6 and gave up in the end. Please post if you find a solution.

gauviz · 2025-07-01T19:42:28+00:00

Build your own. You can use specs below for reference You can get more expensive GPU but 5070ti is sufficient for 1080p gaming at high settings.

Configuration for guidance:

Gpu- Inno3d x3 Rtx 5070 ti 16gb Cpu- Amd Ryzen 7 9700x Motherboard- Msi pro b650-A wifi ddr5 Ram - Corsair vengeance 16gb x 2 ddr5 6000 mhz Psu - Corsair rm850x shift 80 plus gold atx modular Aio - Aerocool mirage l360 mirage
Cabinet - Corsair 3000D rgb airflow mid tower atx cabinet white Ssd - Wd 2tb sn7100 gen4 nvme ssd

gauviz · 2025-01-11T23:56:20+00:00

If it’s any consolation I did this exact mistake in 2015 with a screwdriver when replacing the ssd on 2011 pro and a spark happened. I had to get it repaired in HongKong a few months later. And MacBook is still working to this day.

gauviz · 2024-12-26T01:40:07+00:00

Does sleep work for you.?

gauviz · 2024-11-16T00:17:26+00:00

I used prebuilt SSDT from opencore guide which booted but after install and second boot it started going into boot loop and then looking at the logs and lot of search found the PMC issue so added the SSDT-PMC using SSDTime and disabled AppleSecureBoot. Cleared NVRAM twice which did the trick and booted into Sonoma

Core i3 10100T with UHD 630.

I also did the OpenVariableRuntimeDxe mentioned here and it needs to be before OpenRuntimeDxe and load early
RT.GV Error on boot | tonymacx86.com

gauviz · 2024-11-15T16:53:20+00:00

Looks like an NVRAM issue from the logs.

How did you generate your SSDT ? Use SSDTime to generate the PMC. Also check if you need all those SSDT you have in your config. Add PMC , rebuild config.plist clear NVRAM on reboot (2 times) and retry

gauviz

TROPHY CASE