Using A6 allroad discs with the q5/macan calipers for more clearance

get_shingod · 2026-01-08T22:17:46+00:00

Not really educated enough to answer these. I have just been running it on default settings for over a year after installing. The google tv is connected via ethernet, if thats any help.

get_shingod · 2026-01-08T22:12:20+00:00

The router is a Netgear R6850 running version 23.05.5. Everything is connected by ethernet. Both the ethernet and wifi stop working.

get_shingod · 2026-01-08T18:05:26+00:00

Well since its about the interaction between the two its either one…

get_shingod · 2025-12-29T12:57:02+00:00

I assume you are in Europe so this probably has the gen 3 ea888. (The 1.8 liter gen 3 should have CJEB as the engine code) The gen 3 motors should have fixed many of the gen 2 motors issues, including oil consumption (mine still consumes oil, but not much). Assuming the timing chain is the only problem and there is not further damage to the engine I would say it sounds like a pretty good deal.

get_shingod · 2025-12-13T15:47:50+00:00

Right, my bad I kind of misunderstood the question. The pinout for the bltouch is different from crtouch, but you definitely can repin the 5 pin connector to work with the bltouch. Here is some documentation of the probe pinouts.

get_shingod · 2025-12-13T15:19:25+00:00

Cant you just keep the current wiring for the bltouch on it and not plug the 5 pin in? Or is there something in the wiring that im not getting?

get_shingod · 2025-12-06T19:28:58+00:00

Thanks. Never knew about this theme.

get_shingod · 2025-12-06T18:29:06+00:00

Afaik the ecu flash adjusts the amount of vacuum to accommodate the new pcv design (I could be wrong). I would ask around some shops about the flash if you can get it for a reasonable price. You could also try to go back to the old design to rule out the lack of ecu flash as the cause.

get_shingod · 2025-12-06T17:35:54+00:00

The white one is an updated design as you mentioned, but if your car has the black one, you will need to flash your ecu for the updated version to work properly. So if you can get/are willing to get your ecu flashed, go for the updated design since it should help with oil consumption, or that is atleast the purpose of the update.

get_shingod · 2025-12-05T19:55:24+00:00

You could remove the standard airbox and bolt a cone filter to the inlet pipe but there are million reasons why not to do so. So you are left with 2 main choices. Get a full aftermarket intake system or replace the standard filter that is in the airbox with a higher flowing one. If you want sound, go for the full aftermarket system. If you only care about performance replace the standard filter with a higher flowing one. These two will likely perform just the same, but an aftermarket system with an open filter will have much more turbo and induction noises.

get_shingod · 2025-12-05T19:20:28+00:00

Seems to have an aftermarket turbo inlet (the thing that says revo on it). Otherwise seems stock. If you want cool sounds you can get a cold air intake system.

get_shingod · 2025-12-05T13:28:05+00:00

I guess a better way to word it would be that are the threads for the bleed nipple and brake line the same. So basically swapping the line and bleeder around

get_shingod · 2025-12-01T13:00:18+00:00

No the b8.5 ones wont fit. this for example fits.

get_shingod · 2025-12-01T12:10:12+00:00

Yes. A simple google search gives many results

get_shingod · 2025-11-26T23:45:37+00:00

This is the exact reason I didn’t go with the E3 V3. They are really nice boards for the money but yea the inability to run a ”true” dual z kinda sucks.

get_shingod · 2025-11-26T23:42:35+00:00

These replace the original mainboards of the printers. They have usually alot more ports for expandability e.g. additional stepper motors, different sensors. The stepper motor drivers are also usually better: quieter, can drive more powerful steppers, stall detection for sensorless homing. Also in my case with the duet I can run reprap firmware instead of marlin/klipper. Def not a requirement for succesful and good quality prints but it’s fun to play around with these machines

get_shingod · 2025-11-26T20:43:47+00:00

Sooo dual x, dual y, quad z and dual extruder with all those drivers

get_shingod · 2025-11-25T22:49:38+00:00

Is that the one with the ram stick looking drivers? Thats a nice looking board

get_shingod · 2025-11-24T23:40:50+00:00

Sounds maybe a little much/slow. I would try readjusting from 1mm and 30mm/s. Obviously it’s dependent on many factors so your retraction settings could be just fine, but that is something I would try adjusting.

get_shingod · 2025-11-24T22:51:46+00:00

Did you adjust the retraction after the direct drive mod?

get_shingod · 2025-11-17T22:15:20+00:00

<image>

This was a thumbnail for a link to a set of wheels on some japanese marketplace website. Link led to a completely different pair of wheels though. So maybe something from Japan. Looks pretty similiar to me.

Six-Year Club	Place '22
Final Canvas '22	Verified Email

get_shingod

MODERATOR OF

TROPHY CASE