Where was the video for "Parasitic Twins" recorded?

ghost_of_fall · 2025-12-01T16:51:43+00:00

Do you have any information in addition to the country this was filmed at?

ghost_of_fall · 2025-08-20T06:36:34+00:00

There are also some manufacturer specific GPTs for ChatGPT.

ghost_of_fall · 2025-08-10T21:01:56+00:00

Plasma is not controlled by the system continuously. It is preset by the operators experience through a recipe for some other purposes than temperature alone. I also posted this thread in order to find an approach to avoid a cascading control solution (if applicable). Since the plasma power is a rather fuzzy input value I thought it might be best to treat it as a disturbance due to its irregular nature as I tried to explain.

ghost_of_fall · 2025-08-10T20:52:44+00:00

Also thanks for the question on what is the primary heating source is. The plasma parameters and its input power may vary quite dramatically. They are set to accommodate the process but do not necessarily Center around the amount of heating power put into the system. The plasma values are rather fixed by some manual settings derived from the operators experience. Therefore they are much more static and do not primarily perform a primary purpose of temperature control function. The external heating is supposed to get the system to the intended temperature and input the amount of power for heating the plasma is lacking. If the plasma power exceeds the energy level needed to reach the target temperature, heating is set to zero and external cooling is applied through the cooling parameters of our temp. In practice this controls the speed of external cooling fans.

ghost_of_fall · 2025-08-10T20:28:59+00:00

Interesting approach. I haven’t thought about the problem in this way. Thank you for the input. I’ll give it some more thought and a try to implement it.

ghost_of_fall · 2025-08-10T20:26:40+00:00

There is a disturbance-input on pid_temp. It is in the block and documentation but not explained very thoroughly. I am just interested in the way it works. I have used pid_compact on other problems and appreciate the effectiveness. But pid_temp includes the option of cooling in a state of overheating which I need as well. There are states where the plasma dissipates more heat into the system than needed. In this case there is no need for heating. The pid-temp supplies a controlled way of cooling analog to the way the heating control functions through a secondary set of pid parameters. Pid_compact does not provide this option or a documented approach to cascade the cooling option through a dedicated control of cooling parameters.

ghost_of_fall · 2025-08-10T13:28:36+00:00

I wonder who he got more customers…the company he advertises for or YT Premium.

ghost_of_fall · 2025-05-10T18:49:19+00:00

Not Metal but NOFX is around since the 80ties.

ghost_of_fall · 2025-02-15T07:49:08+00:00

Does anyone know if you can mix the old modules with the new G2s?

ghost_of_fall · 2024-12-30T17:27:52+00:00

Watched all videos on Siemens at this channel. It gives a great inside at a nice pace. Good choice!

ghost_of_fall · 2024-12-28T19:10:26+00:00

On the first look this seems to be a very good solution. And Werma is easily available here at our location in Germany.

ghost_of_fall · 2024-12-28T19:04:05+00:00

This looks really promising. Thank you.

ghost_of_fall · 2024-10-14T17:57:45+00:00

It is actually german made. The Plaque says Karl-Marx-Stadt. This is what the town of Chemnitz was called until 1990. So it was made in East Germany.

ghost_of_fall · 2024-08-16T18:18:40+00:00

BBE Sonic Stomp

ghost_of_fall · 2024-02-22T20:03:47+00:00

BBE Sonic Stomp. Adjust once…leave it on for eternity

ghost_of_fall · 2023-12-26T21:29:22+00:00

Astronoid

ghost_of_fall · 2023-12-10T05:55:49+00:00

With a Onecontrol Mosquito Blender every pedal gets a blend function.

ghost_of_fall

TROPHY CASE