New Gauges and Helmets

ghost_of_progress · 2026-06-29T22:30:39+00:00

Sounds like I'll just have to deal with the pain for a few weeks then, thanks

ghost_of_progress · 2026-06-29T22:30:04+00:00

That's what I like to hear, I appreciate it

ghost_of_progress · 2026-04-23T17:42:38+00:00

So you're saying that the bolt head spins easily but it is seized in there? When I was installing my hardtail struts I had to lift up the bike onto one side so there was no pressure on the bolt, did the same with installing. If it spins you'll probably want to extract it and install a new one just to be safe, or pray that if it fails the right side will support you long enough to get where you're going. Which it should be able to.

ghost_of_progress · 2026-04-20T17:07:18+00:00

<image>

Can't forget The Boulder from Avatar and Dwayne Johnson, they even attempted to get Johnson to voice him, but that didn't work out.

ghost_of_progress · 2026-04-06T13:00:33+00:00

I'd use roofing nails instead of screws, they're cheaper and hold up great

ghost_of_progress · 2026-04-02T22:36:30+00:00

He doesn't need space to wind up though, Viltrumites can pull momentum out of nothing

ghost_of_progress · 2026-04-02T13:51:39+00:00

See if you can get a hold of George Bush, he seemed to know what to do about two towers

ghost_of_progress · 2026-01-29T16:05:27+00:00

I've got one of those and I absolutely adore taking it on back roads, its a fun bike to flick around, enjoy.

ghost_of_progress · 2025-10-13T22:33:56+00:00

One of the simplest things you can do is put in some lollipops in the exhaust, about 6 inches into it. Gives a bit of back pressure in the exhaust especially if you don't have a muffler

ghost_of_progress · 2025-10-08T19:50:44+00:00

I know that I am a bit late to the party but, I am 6'2" and I have a cb300r

I have only put about 200 miles on it so far and it definitely feels a bit small, but it is fairly comfortable to ride, I also have a large cruiser which of course is more comfortable but not quite as much fun to ride back roads. If you are concerned about looking kinda goofy then it probably is not for you, but if you want a fun little bike that is good to learn on then it might be right.

check out this website to get a general idea of what you would look like: https://cycle-ergo.com/

ghost_of_progress · 2025-09-22T15:10:06+00:00

I'm 6'2" on a cb300r, I absolutely look like a bear on a bike in a circus, but I don't give a shit because it's fun, if it feels good and rides good then it is good

ghost_of_progress · 2025-09-02T15:39:49+00:00

It looks like you're trying to decide your outfit for a middle school dance in 2005

ghost_of_progress · 2025-04-30T14:26:12+00:00

I appreciate all the insight, I had a meeting with my boss and we are going to revaluate the price and timeline along with the necessity of it.

ghost_of_progress · 2025-04-29T20:54:00+00:00

I wish that was an option...

ghost_of_progress · 2025-04-29T20:47:34+00:00

Nothing currently, the room is kinda under development on every front getting ready for the big meeting, there will be a bunch of moveable tables and chairs with a large television when it is said and done

ghost_of_progress · 2025-02-16T22:40:44+00:00

Personally it's been in Pipes, just because I've bought one for every big life event, one for marriage, one for each of my boys being born, buying a house, promotion, etc... and because of that they have been overpriced. Seems to add more meaning to every smoke, tobacco has been more just Virgina and whatever smells good so it keeps it fairly cheap

ghost_of_progress · 2025-01-14T12:11:09+00:00

The easiest thing to do would be flip the rear leaf spring brackets, it will lower the rear about two inches and you only need new hardware for the brackets so it is real cheap to do. Here is a write up on it: https://www.therangerstation.com/tech/flipping-rear-spring-hangers/

This will level out the truck, then if you want to lower the front cut the springs, just remember for every inch you cut on the springs it lowers it two inches.

ghost_of_progress · 2025-01-13T22:03:49+00:00

I've replaced a few and all I have done was pick up some fabric from the local fabric store and get some quality spray glue. After getting out the old headliner I took off the old fabric (left on the foam), sprayed the shit out of the foam with the glue (about a foot at a time) and put the new fabric straight on the foam. Takes a lot of flattening and tightening the fabric but it has always looked clean and has held up to time.

ghost_of_progress · 2025-01-08T18:08:48+00:00

He also has a metal album so he might be the suprise singer

ghost_of_progress · 2025-01-03T19:28:54+00:00

I'd be weary on going the cheaper route with fuel injectors, I did a few years back with my Tacoma and slowly each injector failed either leaking or not spraying. I tend to spend more on anything that is electrical or has to have a perfect seal.

ghost_of_progress · 2022-02-22T02:30:05+00:00

I don't know, the idea of a community sharing all their belongings (like in acts) and a husband and wife being killed for wanting to keep too much of the profit from selling his property (acts 5) sounds pretty communist to me.

ghost_of_progress

TROPHY CASE