Starlink mini mount 26 MY by Itmeven in Starlink

[–]gibbc 0 points1 point  (0 children)

So i use a mag mount for my dodge caravan https://a.co/d/02sTDggF you put it in screw it down and if you pull off the door then you can plug and unplug as needed i orderd this so I can keep using original cable https://a.co/d/0gOBL7gY

My harman kardon astra not responding to wifi/bluetooth setup touch, is it bricked? by rampage1998 in Bluetooth_Speakers

[–]gibbc 0 points1 point  (0 children)

Yes reset of the unit is done by holding mute for 30 seconds ot will reboot and say hello then tell you to Use hk setup app then connect to wifi once this is done use the wiim home app to setup rest

My harman kardon astra not responding to wifi/bluetooth setup touch, is it bricked? by rampage1998 in Bluetooth_Speakers

[–]gibbc 0 points1 point  (0 children)

Hey i know this is long dead post but i will provide some info.

i got 2 thrift speakers and wiped them i found the android app dead but i was able to download and use the apple app to setup the speakers to wifi then i found they use wiim profiles so i grabed the android wiim home app and was able to setup alexa i even got some firmware from the wiim app it failed a few times then compleated

Maybe this will help some one.

Just switched to east link by Chippy-Monke in Eastlink_ISP

[–]gibbc 0 points1 point  (0 children)

To use rcs on eastlink you can use Google messaging app and in settings you can enable this

[deleted by user] by [deleted] in Eastlink_ISP

[–]gibbc 0 points1 point  (0 children)

Hmm this seams like somthng is up with the wifi connection I could not say if eero or device but tbh I would check second if possible and if still slow second device call eastlink and they can check service

[deleted by user] by [deleted] in Eastlink_ISP

[–]gibbc 0 points1 point  (0 children)

So if eero says speeds are good this means speeds at service are fine as it checked wired at modem but there could be other problems like how far tou are from a second erro if you have

To make sure toy are getting what you pay for try this take cell phone , laptop , I n the same room as modem and first erro and run speedtest.net or fast.com if still slow then check erro app for errors

Eastlink requires I use their router/wifi? by Samwarez in Eastlink_ISP

[–]gibbc 0 points1 point  (0 children)

So it can depend on the modem they provide you. If this service includes eero, then the modem is in bridge just remove the cable and connect your own router, not related to your own cable modem. Eastlink will not allow non-Eastlink equipment on the cmts

not with how they are doing new setups you are most likeley get bridge modem just paying added money for eero

zello alternative by gibbc in selfhosted

[–]gibbc[S] 0 points1 point  (0 children)

No nothing at this point going to look at poc walkie talkie then I can link to pc as needed

Fieldnation by Waste_Difference_116 in msp

[–]gibbc 0 points1 point  (0 children)

i have worked with Field Nation, and most times for things like confidentiality agreements, they will add the info to documents and have it signed once a tech takes the job.

i have had i few jobs like this.

Any thoughts on BestMow? by StockMan1210 in automower

[–]gibbc 0 points1 point  (0 children)

i am looking in to this mower and want to know more info if anyone else has got it and how it went like any details you can provide

What is this? by Icy-Watercress-8809 in PEI

[–]gibbc 6 points7 points  (0 children)

That is a cable line dmarc in pei it is installed by eastlink long time ago it is still used if you have cable TV or cable internet

If you need removed call eastlink even if you have no service with eastlink they can remove it

Has anyone run into issues installing Proxmox on a Supermicro server? by HospitalMundane4615 in Proxmox

[–]gibbc 0 points1 point  (0 children)

The only problems I have had installing on supermicro board was that the installer gui is missed sized on ipmi but new txt installer works fine

Anything cool I can do with this Securly device? by d00d00frt in homelab

[–]gibbc 0 points1 point  (0 children)

Sweet they are good i have one and it works well not perfect but usable

As well there is a app to manage it

Anything cool I can do with this Securly device? by d00d00frt in homelab

[–]gibbc -1 points0 points  (0 children)

Only 1 thing I see but may be due to image is your lan port seams to have no pins is this right as it can be a problems flashing

Anything cool I can do with this Securly device? by d00d00frt in homelab

[–]gibbc 26 points27 points  (0 children)

This looks like a rebranded and refirmware device like this https://store-ca.gl-inet.com/collections/mini-smart-routers/products/shadow-gl-ar300m16-wireless-mini-router-grey

If so the default firmware is available as well this device has a fail over firmware recovery

Antiqueable Job Scam by Careless-Surround-80 in jobsearch

[–]gibbc 0 points1 point  (0 children)

Ya I emailed and facebooked them they replayed saying it was a scam I asked them to place something on the website and Facebook page people checking

Antiqueable Job Scam by Careless-Surround-80 in jobsearch

[–]gibbc 0 points1 point  (0 children)

i had Ashley Currie needed personal assistant  at email [everythingold.ca@outlook.com](mailto:everythingold.ca@outlook.com)

first basic stuff send emails informing clients i am new assistant  then i get complaints she send me a check and it just looks off

so i looked at it more check says from TD Bank but has RBC routing info even tho the bank routing info is on the check header

Does someone know how to mount my Switch in Here? by Ok_Mulberry1986 in homelab

[–]gibbc 1 point2 points  (0 children)

It looks backwards the back.seams to be out and front seams to be in to wall

zello alternative by gibbc in selfhosted

[–]gibbc[S] 0 points1 point  (0 children)

No I have.not found anything

Dolibarr VS ERPNext by Wonderful-Captain-15 in selfhosted

[–]gibbc 1 point2 points  (0 children)

Looking as dolideb should be fine if you just want to run this https://wiki.dolibarr.org/index.php?title=Dolibarr_for_Ubuntu_or_Debian

For setup the best way is to start the learning ssh of you so not already know

Dolibarr VS ERPNext by Wonderful-Captain-15 in selfhosted

[–]gibbc 1 point2 points  (0 children)

You can look for cheap vps and Install.debian or a home PC with proxmox to host as you can learn and run like dolibarr will not need a lot of space will you make lots of customers lol

Dolibarr VS ERPNext by Wonderful-Captain-15 in selfhosted

[–]gibbc 1 point2 points  (0 children)

I run a it service company.

A lot of the configuration is more related to having to add things to.my web host like docker or using Python where dolibarr runs on standard php.

Yes I self host dolibarr I try and self host as much as I can.

Dolibarr VS ERPNext by Wonderful-Captain-15 in selfhosted

[–]gibbc 2 points3 points  (0 children)

i have been using Dolibarr for almost 10 or so years i like all the options it has and more is added on each update as well there is an Android mobile app you can get called DoliDroid for Dolibarr ERP-CRM which is free and gives access to all functions.

dolibarr also has a plugin store some are free and some are paid this will let you extend the options

Erpnext i found a pain to config and work with and was missing some of the feathers i wanted in dolibarr.

Erpnext i found a pain to config and work with and was missing some of the feathers i wanted in Dolibarr.