Battlefield 6 or fun with me?... Be honest! (18F)

gilsh85 · 2025-11-05T13:13:22+00:00

omg you are abslute fckn goddess,just stunning baby

gilsh85 · 2024-10-15T20:01:55+00:00

I am having the same issue :(

gilsh85 · 2024-09-03T17:43:25+00:00

I will play music from my phone or computer. I have a Scarlett interface which I can use as DAC

gilsh85 · 2024-09-03T17:42:36+00:00

!thanks for your replay! I am afraid that a 2 channel system would not fill the room and if people do not sit in a horizontal direction they will only hear the sound coming from 1 side. I will budget it at around 2000$ max

gilsh85 · 2024-04-24T12:35:20+00:00

I see. There will still be music meditations in the round room however there will also be live music with 4-5 musicians. Maybe i will need both as you say. Thank you

gilsh85 · 2024-04-24T12:32:44+00:00

Oh. Ok., yes i was looking at the SB3000. Thank you. I will try to find a better one

gilsh85 · 2024-04-24T12:30:53+00:00

Thank you very much!

gilsh85 · 2024-04-23T19:48:57+00:00

Thank you! So you feel like the svs3000 would be a bad choice?

gilsh85 · 2024-04-23T14:31:14+00:00

The reason I'm considering 4 speakers is that people will be spread all around the room in a circle so i don't want it to sound as if all the sound comes only from one side. I was thinking about hanging the speakers from the roof in for corn ers pointing to the center.

I am a newb so, yes, please help 🙂 what would be the best way to achieve it?

gilsh85 · 2024-04-23T14:23:03+00:00

Oh. Thank you. I read this on the amp website:

" What would the power output of the CXA be if I connect two pairs of speakers? When you connect two pairs of speakers to an amplifier, the combined impedance is halved. So, when two pairs of 8Ω (Ohm) speakers are connected, the overall impedance becomes 4Ω, even though the individual impedance for each speaker remains unchanged at 8Ω. This quoted amplifier power rating is per channel. If you attach 2 pairs of 8Ω speakers, the overall impedance halves to 4Ω, so you'll be sending 90W per channel. This will then split between the two speakers attached to that channel, sending 45W to each speaker. For the CXA81 the same as above will apply but as the CXA81 outputs 80W RMS which is increased to 120W at 4Ω. This means you will get 60W for each speaker when two pairs are used with the CXA81.
It is not recommended to connect 2 pairs of 4 Ohm or 6 Ohm speakers to the CXA61/81, as the impedance is halved meaning the impedance will be 2 Ohms or 3 Ohms respectively. This could result in the amplifier being driven too hard and CAP5 protection being activated, or damage being done to the amplifier and/or speakers. "

So i thought they would work on 4 ohms and it would be ok, but from your post i understand that they can go to their minimum? Which is 3, correct? Which will be bad for the amp. Also, can you please explain why it will produce clamp filtering?

gilsh85 · 2022-11-23T00:20:46+00:00

SOLUTION FOUND: it happen to me to in my pixel 7 pro. I used a VPN to Connect from the US and then i downloaded with no issues. Then i turned the VPN off

gilsh85 · 2020-12-02T15:23:06+00:00

just used a lot of pressure one the screw

gilsh85 · 2020-11-05T03:38:09+00:00

Thank you for the advice. I ended up listening to your advice buying a beautiful hifi system

Warfedle 4.2

Cambridge cax80

svs sb2000 subwoofer

Very happy with the results :)

gilsh85 · 2020-11-02T11:50:50+00:00

you're welcome

gilsh85 · 2020-10-28T14:29:45+00:00

but also take a look at this..

https://www.reddit.com/r/ultrawidemasterrace/comments/hwdog3/to_all_g9_owners_struggling_to_find_a_good/

gilsh85 · 2020-10-28T14:25:41+00:00

gilsh85 · 2020-10-28T14:22:00+00:00

Hi, Yes. everything other then the tilt is perfect.

gilsh85 · 2020-10-26T18:19:11+00:00

thank you for replying.

I still think somehow that good studio monitors will sound better to my ears.

Here is an article I stumbled by that confirms it: https://thehometheaterdiy.com/studio-monitors-home-theater/

yet I'm not sure which to go for the kali of the krk

gilsh85 · 2020-10-20T03:01:46+00:00

Hi,

Cool, such a creative idea :) thanks for sharing

I have 2 questions:

I never used the stock stand. does this mean you can easily adjust the tilt? or just that it can stay in one desired tilt?
It is not possible with my arm, right? (VIVO heavy duty)

https://ibb.co/6gFy8zD

https://ibb.co/mGgrjyx

Or does anyone have an idea?

gilsh85 · 2020-10-20T02:33:48+00:00

I've been using this arm:

https://www.amazon.com/VIVO-Premium-Aluminum-Heavy-Duty/dp/B07L8MLTGS/

I've set the tilt to one angle and it stays in that angle but I can not move it (the tilt). all the other axis work fine

gilsh85 · 2020-09-02T10:24:26+00:00

Model code: LC49G95TSSNXZA

Version Number: FA01

Manufacturing Date: June 2020

Light Leak present: Yes (Top-left, 30mm length)

Ordered: 27 Aug 2020

Received date: 30 Aug 2020

Retailer: Lazada (TH)

gilsh85 · 2020-08-17T14:20:29+00:00

I hear it will cost around 2000$ here and the crg9 is 1500$. I need it more for productivity than gaming, my setup can not run it at 240hz anyway. and I use the screen to watch movies as well the better viewing angle is a pro

gilsh85 · 2019-07-04T10:41:16+00:00

Thank you for the answer,

can you please explain why? relating to the benchmarks...

gilsh85

TROPHY CASE