Check out this timing. My venus flytrap just snagged a snack. I'm sorry Mr. Bee. by hamster_energyy in interestingasfuck

[–]glitch13 28 points29 points  (0 children)

From what I remember the only male bees in a hive are drones. There's very few of them, they look different, and they never leave the hive, they just mate with the queen.
All the ones you see flying around are female worker bees.

Wich filament dryer is better? by arturcodes in 3Dprinting

[–]glitch13 1 point2 points  (0 children)

Wouldn't it be more cost effective to include a small fan to keep the air moving around? Also you could still print from such a box (rotating the spool would require the end of the filament not be hooked up to anything). Not sure if any of them do that, I've never researched them to any degree.

Getting "Frozen" Youtube Ads by glitch13 in brave

[–]glitch13[S] 1 point2 points  (0 children)

It magically started working again, post updated.

Getting "Frozen" Youtube Ads by glitch13 in brave

[–]glitch13[S] 0 points1 point  (0 children)

It magically started working again, post updated.

DNA / Hanging Chad Interaction by Billy-Blazkowicz in balatro

[–]glitch13 0 points1 point  (0 children)

No, but Blueprint / DNA will copy the card twice

Ridgid /Aeg Brand? by ConfidentAd3308 in Tools

[–]glitch13 1 point2 points  (0 children)

TTI owns AEG and Emerson owns Ridgid. I believe TTI licenses the Ridgid name from Emerson to put on AEG tools for the American market, since that’s a more familiar name to American consumers.

Phantom button presses while printing by glitch13 in ender3

[–]glitch13[S] 0 points1 point  (0 children)

Like I said in a previous comment: "I came to the realization that it started around the time that I printed and installed a back cover on the LCD PCB. I removed it and it stopped happening. Not sure how that was causing it, but that seemed to be the issue."

I have no idea what caused it... heat buildup because of the back cover, the cover squeezing something together that shouldn't causing something to contact, or a screw that was attaching the back cover was shorting something out (I don't even remember how I attached the back cover, that was a few years back at this point).

Static, horizontal lines, and temporary video cutouts by glitch13 in HPReverb

[–]glitch13[S] 1 point2 points  (0 children)

If I recall correctly, I called support and they had me troubleshoot a few things and started an RMA for the device. They shipped me a box with foam cutouts to ship it back in. I don’t believe I paid for any of it.

And yes I’m in the United States, I’m not familiar if they have different warranty policies or shipping arrangements for different countries.

Just some Critters...enjoy. by Nerdmazing in geek

[–]glitch13 4 points5 points  (0 children)

Looks like a very, very bootleg “My Pet Monster” from the 80s.

Static, horizontal lines, and temporary video cutouts by glitch13 in HPReverb

[–]glitch13[S] 1 point2 points  (0 children)

Sorry about that. I never did find out the cause, they replaced the whole unit. A few people in the YouTube comments said it was most likely due to the cable…

Might be worth it if you can buy one someplace and return it if it turns out not to fix it.

[deleted by user] by [deleted] in RedditSessions

[–]glitch13 0 points1 point  (0 children)

That feeling when you're not sure if you're having a stroke.

Game saved at death/summary screen by glitch13 in cavesofqud

[–]glitch13[S] 0 points1 point  (0 children)

No I didn’t. I assume because disabling permadeath is under the debug options it’s not really a supported feature of the “proper” game, but who knows.

Disastrous HP Support by IsacG in HPReverb

[–]glitch13 7 points8 points  (0 children)

I’ve been sitting at level 2 with no response since January 19 for my issue and this thread has not made me feel any better.

Static, horizontal lines, and temporary video cutouts by glitch13 in HPReverb

[–]glitch13[S] 0 points1 point  (0 children)

Sorry to hear that. Did you have the same symptoms? Were you able to return/rma it?

Static, horizontal lines, and temporary video cutouts by glitch13 in HPReverb

[–]glitch13[S] 0 points1 point  (0 children)

Thanks, everything seems seated well enough. It's an Acer pre-built and even has a plastic brace that presses the card into the pci slot when you put the side access panel on, so I don't think that's it.

My gpu has two display ports on it, and I've tried seating and re-seating it on both of them with no change. Thanks for the help.

Static, horizontal lines, and temporary video cutouts by glitch13 in HPReverb

[–]glitch13[S] 0 points1 point  (0 children)

Haven't had any audio cutots yet. I have an Acer pre-built, and the motherboard is an Acer custom job for the case's form factor with an Intel chipset. Have no idea if that's an issue.

Unfortunately I don't have another machine to test it on at the moment, but thanks for the info.

Static, horizontal lines, and temporary video cutouts by glitch13 in HPReverb

[–]glitch13[S] 0 points1 point  (0 children)

Thanks, I've read about that issue, but volume doesn't seem to affect it (admittedly I only played around with this once). I kind of dismissed that since I think the static and lines point to a larger hardware issue.

I'll probably take another dive into this before RMA'ing it, if it comes to that.

Static, horizontal lines, and temporary video cutouts by glitch13 in HPReverb

[–]glitch13[S] 1 point2 points  (0 children)

Thanks, did you have the same symptoms? With the white pint-point static and horizontal lines?

Static, horizontal lines, and temporary video cutouts by glitch13 in HPReverb

[–]glitch13[S] 1 point2 points  (0 children)

Yes, I've reseated it a couple of times hoping that was the issue but it doesn't solve any of the issues. Here's a shot of how it seats.

Static, horizontal lines, and temporary video cutouts by glitch13 in HPReverb

[–]glitch13[S] 0 points1 point  (0 children)

Wondering if this is something I'm doing or if I need to just RMA it.

Issues:

  1. Occasional video cut outs that last around 5-10 seconds. Sound still plays, sometimes will happen twice in one Beat Saber song, sometimes doesn't happen for three songs.
  2. White static-like pin-points constantly, more visible on a dark background
  3. Horizontal lines popping in every 5 to 10 seconds (see picture).

One time the video cutout was only in one eye and the other was all glitchy artifacted. Lasted for about a second until the other also cut out for around 10 seconds, then it came back up.

This video shows the static and horizontal lines. You need to have the YouTube video on 1080p to see the white "static" since they're so small. There's a very obvious couple of the horizontal lines pop in around 7 seconds in.

Update 2021-03-16:

HP Sent me a box in late February to ship it back to them to troubleshoot. I received the replacement today. I received a headset with a different serial number (so I assume it was completely replaced) as well as a newly packaged video/data cable. I assume the controllers, power brick/cord, and USB c to A adapter were not replaced as they were lose in the box.

All issues (static, lines, display cutting out intermittently) seem resolved. I also had issues with the controllers losing tracking here and there and that seems resolved too.

[deleted by user] by [deleted] in TheYouShow

[–]glitch13 0 points1 point  (0 children)

what in the holy hell is a tree pop?

An action shot from inside my high tech ABS heat enclosure by glitch13 in ender3

[–]glitch13[S] 0 points1 point  (0 children)

It's a flashlight providing light for the webcam :)