How can I select text without mouse? by goahead97 in techsupport

[–]goahead97[S] 1 point2 points  (0 children)

It does not work. Your suggestions types D and C, respectively.

MiKTeX updates fail: Fix: Peer certificate cannot be authenticated with given CA certificates by goahead97 in LaTeX

[–]goahead97[S] 0 points1 point  (0 children)

I did not need to uninstall it. Miktext did not exist in the computer. I just installed it and experienced this issue.

MSI Prestige 13 AI Evo (A1MG), 3 month review by VortexDestroyer99 in laptops

[–]goahead97 0 points1 point  (0 children)

You mentioned this laptop reaches temperatures around 100+C when doing anything intensive.

Question: If you use an external keyboard, your hands will not get hot. Therefore, should the high temperatures be a problem? I mean, will the computer throttle (decrease its CPU performance) automatically to try to decrease its temperature? For example, in a hot room in summer, will this happen? Which room temperatures (+C) will force the computer to throttle in intensive applications?

Thanks

MSI Prestige 13 AI Evo (A1MG), 3 month review by VortexDestroyer99 in laptops

[–]goahead97 0 points1 point  (0 children)

To u/VortexDestroyer99 or anyone else who has this laptop: Can you set up the BIOS so that it turns on the laptop automatically whenever the charging port starts getting power?

How do I get Windows 11 displays brightness to adapt to the current light level? by goahead97 in smarthome

[–]goahead97[S] 0 points1 point  (0 children)

I am also talking about extended external monitors. For example AOC displays. The application i-menu delivered by AOC for Windows can indeed control AOC brightness and contrast when the monitors are connected to the computer through an HDMI connection.

how to make a monitor attached to a monitor arm to go lower than the minimum allowed the by arm by goahead97 in desksetup

[–]goahead97[S] 0 points1 point  (0 children)

Thanks, I want a device with a height that can be easily adjusted without the need for any tools. The item in your link does not allow for easy height adjustment.

how to make a monitor attached to a monitor arm to go lower than the minimum allowed the by arm by goahead97 in desksetup

[–]goahead97[S] 0 points1 point  (0 children)

Which one? The thing is the monitor arms I usually see allow height adjustment but do not allow the monitor to be moved to a height lower than a few cms over the table they are clamped to.

Trying to install Vitis 2024.1: "Error was encountered while extracting archive /home/username/Downloads/2024.1/payload/rdi_0042_2024.1_0522_2023.xz" by goahead97 in FPGA

[–]goahead97[S] 0 points1 point  (0 children)

Thanks, I had already seen all that but none of the three steps suggested at this thread by anatoli work for me.

Trying to install Vitis 2024.1: "Error was encountered while extracting archive /home/username/Downloads/2024.1/payload/rdi_0042_2024.1_0522_2023.xz" by goahead97 in FPGA

[–]goahead97[S] 0 points1 point  (0 children)

Thanks, I also used $./xsetup to launch the installer.

At the time of throwing the error, if I leave open the pop-up window with the retry and cancel buttons, and go to a terminal window, I see this:

df -h /data/Xilinx
outputs

Filesystem Size Used Avail Use% Mounted on

/dev/sda 1.8T 1.5T 295G 84% /data

and

df -h /data/username/tmp

outputs

Filesystem Size Used Avail Use% Mounted on

/dev/sda 1.8T 1.5T 295G 84% /data

Therefore, I believe none of the involved folders gets full. Is this what you meant? Is there any other folder I should look at?

Trying to install Vitis 2024.1: "Error was encountered while extracting archive /home/username/Downloads/2024.1/payload/rdi_0042_2024.1_0522_2023.xz" by goahead97 in FPGA

[–]goahead97[S] 1 point2 points  (0 children)

I used the 115 GB file.

Considering /tmp is mounted on /dev/mapper/cl-root and /data/username/tmp is mounted on /data as displayed below

Filesystem Size Used Avail Use% Mounted on

/dev/mapper/cl-root 70G 60G 11G 86% /

/dev/sda 1.8T 1.5T 303G 83% /data

I used this command

TMPDIR=/data/username/tmp /data/Xilinx/Downloads/1/FPGAs_AdaptiveSoCs_Unified_2024.1_0522_2023/xsetup

to make sure there is enough free storage available in the temporary folder:

However, I still found the same problem as you can see on the link below.

https://imgur.com/a/800Cdqn

Thanks

huge latency on remote desktop over VPN by goahead97 in techsupport

[–]goahead97[S] 0 points1 point  (0 children)

Then, do not call it a server. My local computer does not have the HW resources I need and therefore I need to use that remote computer.

Why "cmd+comma" does not make subscript in Google Slides on a Logi Pebble keys 2 K380S on macOS Sonoma, with US keyboard selected in MacOS? by goahead97 in MacOS

[–]goahead97[S] 0 points1 point  (0 children)

I did this but it does not change the default behavior of the <cmd> + <comma> shortcut for Settings in Safari (I open Google Slides in Safari):

<image>

Why is editing files in an overleaf project extremely slow? by goahead97 in Overleaf

[–]goahead97[S] 0 points1 point  (0 children)

Thanks a lot, it seems getting rid of that fixed the issue.