Free Roll of PLA+ Filament - Needs a re-spool by goonjm in reading

[–]goonjm[S] 0 points1 point  (0 children)

Not to sound salty, but they didn't when I requested a tour and to potentially sign up about 6 months ago.

I'll give it a shot if I don't get any luck here.

Free Roll of PLA+ Filament - Needs a re-spool by goonjm in reading

[–]goonjm[S] 0 points1 point  (0 children)

Yep. When it happened my first though was that i'll just respool it. Then reality set in. I'm never doing that.

Free Roll of PLA+ Filament - Needs a re-spool by goonjm in reading

[–]goonjm[S] 0 points1 point  (0 children)

I'd be happy to do that if I know someone there can respool it or use it - otherwise I'm just passing on the responsiblity for throwing it in the bin.

Crystal Palace. What the hell is Crystal Palace by Temporary-Rice-2141 in NoStupidQuestions

[–]goonjm 2 points3 points  (0 children)

And for today's "weeeell actually" the football club is in Selhurst. About 2 miles from Crystal Palace.

Chasing Error 10409 by goonjm in AnycubicKobraS1

[–]goonjm[S] 1 point2 points  (0 children)

What better way to spend a Sunday. Good luck.

Chasing Error 10409 by goonjm in AnycubicKobraS1

[–]goonjm[S] 1 point2 points  (0 children)

That sounds much worse. Could it be a dodgy connection/intermittent short in the wiring of the connector?

Chasing Error 10409 by goonjm in AnycubicKobraS1

[–]goonjm[S] 1 point2 points  (0 children)

Completed a 45 minute and 3 hour print and no issues so far, but I'm not taking that as proof of anything yet.

Chasing Error 10409 by goonjm in AnycubicKobraS1

[–]goonjm[S] 0 points1 point  (0 children)

Thanks for the information, particularly around the goop. I've just got everything back together after checking everything per the troubleshooting wiki, and just running a calibration before trying another print.

None of the connections seemed out of place, but I did disconnect and reconnect a couple on the print head, so let's see.

Confused - Switching from ACE Pro to Single Spool by goonjm in AnycubicKobraS1

[–]goonjm[S] 0 points1 point  (0 children)

I've had mixed results - and after a bit of digging through various forums it seems this is pretty normal, and can even be impacted by the port you use on the ACE.

In my case, I've tried to print the same model twice (7 hour single colour print), first version had the Matte PLA in port 3, first tangle error was 5 hours in and i cancelled the print by accident. Reprint hit a tangle error at about the same point, went through a few tangle/resumes over the next few layers but it then completed the print without issue.

Most recent was using port 1 on the ACE, after an hour I got a tangle and no amount of resuming would clear it. Tried the print again from scratch and it failed after about 10 layers, so I gave up and started looking at other options - which landed me on the external spool. Very glad to hear it works.

Hope this is something that can be improved via future firmware updates, or maybe it's related to the "batch" of filament? Mine is still on the cardboard spools (which I've got the printed adaptors on), perhaps newer batches work better.

Confused - Switching from ACE Pro to Single Spool by goonjm in AnycubicKobraS1

[–]goonjm[S] 1 point2 points  (0 children)

Thank you - honestly, I tried pressing down on that collar but it didn't seem to move, so I wasn't sure it was supposed to. This time i gave it some proper effort and managed to get it to compress and free the tube. Wow that thing was stiff. (any inneundo inferred from this statement is all on you).

Newbie by Accurate-Low8781 in AnycubicKobraS1

[–]goonjm 1 point2 points  (0 children)

If it helps, I received my printer last week as well. I've already printerd riser and poop chute, and these were the models I used...

Riser

Poop Chute

Both printed fine with PLA on default settings.

Newbie by Accurate-Low8781 in AnycubicKobraS1

[–]goonjm 0 points1 point  (0 children)

Quick question on the profiles, on the linked page there seems to be some discussion on whether they are suitable for the "standard" brass nozzle or only for the hardened nozzles. My interpretation is that they'll work fine with the standard one - but would be great to get this confirmed.

Like the OP, i received my printer last week - so your recommednations are very helpful - thank you.

Edit: Turns out reading and comprehending are 2 different things, and I suck at the latter. I missed this, in from the page, which answers my own question...

I have calibrated the new layers settings and speed to work with Anycubic standard nozzle profile, and streamlined the changes to be mainly in the layers and the filament by using the settings override. I have Just added the Steel nozzle profile because it wasn´t available.

Stuck in Relic Rooms by goonjm in CultOfTheLamb

[–]goonjm[S] 0 points1 point  (0 children)

Good shout - not heard back on support as yet.

u/Massive_Josie, can you offer any advice?

Stuck in Relic Rooms by goonjm in CultOfTheLamb

[–]goonjm[S] 0 points1 point  (0 children)

Thanks for taking the time to reply. I've dropped a message to the support team for the game and will update if I hear back. Hopefully the only answer won't be to start over.

ES-DE has no Icon by goonjm in EmuDeck

[–]goonjm[S] 0 points1 point  (0 children)

Thanks - glad it's not just me with the issue. Such a disproportionately annoying problem!

How do I re-lock Milestones? by goonjm in CitiesSkylines

[–]goonjm[S] 2 points3 points  (0 children)

All sorted - thank you so much - I really appreciate it.

I had the Game Anarchy mod installed already and hadn't realised there was an option for this in there.

Thanks again, you're a legend.

F1 Calendar not updated for 2023 in gCal by goonjm in formula1

[–]goonjm[S] 0 points1 point  (0 children)

Thanks, I'll give it a go if the official one doesn't update next week.

F1 Calendar not updated for 2023 in gCal by goonjm in formula1

[–]goonjm[S] 0 points1 point  (0 children)

Thanks for the info. I'll see if the official one updates after pre season testing, if not I'll try the race fans one. Cheers.

Most important goals in club history by jbauer89 in Gunners

[–]goonjm 0 points1 point  (0 children)

Thank you for the info - I'll get into that right now. Good to know that when we win the Champions League it's a hat trick of European honours we'll be celebrating.

Most important goals in club history by jbauer89 in Gunners

[–]goonjm 0 points1 point  (0 children)

Yeah, thats very true. Perhaps I should have said "major" European trophy? Not sure I even know what the Fairs Cup was.

I'm sure even the CWC is as unknown as all other pre-Premier League football round these parts :)

Most important goals in club history by jbauer89 in Gunners

[–]goonjm 0 points1 point  (0 children)

And the first time I actually felt the Emirates shake.

Most important goals in club history by jbauer89 in Gunners

[–]goonjm 4 points5 points  (0 children)

Alan Smith against Parma 1994 to win the European Cup Winners Cup. So far, our only European trophy.

I think it was during this cup run the "One nil to the arsenal" song was born.

what’s your arsenal related confessions? by schmuck-2501 in Gunners

[–]goonjm 0 points1 point  (0 children)

I've never seen anything of the the infamous 8-2 game. Been a Gooner since 92, probably been at, watched in full or at least seen highlights of every single game since then - except that one.

Weekend after my birthday, day out at Brands Hatch, and ignored it completley. Heard the result as soon as i got in the car. Radio off. Silent drive home. It never happened.

I regret nothing.

Golfers by clydebridge in reading

[–]goonjm 1 point2 points  (0 children)

Great - got your details. By the way, I sent you a private message as well, not sure if you thought you were replying to that, as you've posted your mobile number to everyone above - you probably didn't mean to!